|
US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25874.1-2010: Textile machinery and accessories -- Strip steel for dents of reeds -- Part 1: Cold rolled strip steel
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 25874.1-2010 | English | 149 |
Add to Cart
|
2 days [Need to translate]
|
Textile machinery and accessories -- Strip steel for dents of reeds -- Part 1: Cold rolled strip steel
| Valid |
GB/T 25874.1-2010
|
PDF similar to GB/T 25874.1-2010
Basic data | Standard ID | GB/T 25874.1-2010 (GB/T25874.1-2010) | | Description (Translated English) | Textile machinery and accessories -- Strip steel for dents of reeds -- Part 1: Cold rolled strip steel | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | W90 | | Classification of International Standard | 59.120.30 | | Word Count Estimation | 5,563 | | Date of Issue | 1/10/2011 | | Date of Implementation | 6/1/2011 | | Adopted Standard | ISO 9473-1-2006, MOD | | Regulation (derived from) | Announcement of Newly Approved National Standards 2011 No. (No. 166 overall) 1 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies dent cold-rolled steel sheet size, material, and marking requirements. This Standard is applicable to dent cold rolled steel. | GB/T 25874.1-2010: Textile machinery and accessories -- Strip steel for dents of reeds -- Part 1: Cold rolled strip steel
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Textile machinery and accessores Strip steel for dents of reeds Part 1. Cold rolled strip steel
ICS 59.120.30
W90
National Standards of People's Republic of China
Textile machinery and accessories dents steel profiles
Part 1. Cold rolled steel
Part 1. Coldroledstripsteel
(ISO 9473-1.2006, MOD)
Issued on. 2011-01-10
2011-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 25874 "Textile machinery and accessories dents with steel" is divided into two parts.
--- Part 1. cold-rolled steel;
--- Part 2. Hardened steel.
This section GB/T 25874 Part 1.
The partial modification of international standards ISO 9473-1.2006 "Textile machinery and accessories dents steel profiles - Part 1. Cold rolled steel"
(In English). This section according to ISO 9473-1.2006 redrafted, and ISO 9473-1.2006 technical differences are.
--- Delete ISO 9473-1.2006 "range" in the part;
--- Delete ISO 9473-1.2006, Chapter 2, "reference document";
--- The corresponding chapter number has been modified.
Technical reason for the above difference is. these "references" are adopted as the national standard is modified, and are not in the standard text
References.
For ease of use, this section made the following editorial changes.
--- "This part of the international standards" be replaced by "this section";
--- Delete ISO 9473-1.2006 Foreword.
This part is proposed by the China Textile Industry Association.
This part of the National Standardization Technical Committee Textile Machinery & Accessories centralized.
This section drafted. Zhejiang Dingfeng Textile Equipment Co., Ltd., Changzhou reed Blue Arrow Group Ltd., Shaoxing City Water-rich textile equipment
Ltd., China Textile Machinery Association.
The main drafters of this section. Yuding Quan, Shi Yuehao, waters husband, Huang Hongkang, Nike Gang, Ding Guosheng, light Xia culture.
Textile machinery and accessories dents steel profiles
Part 1. Cold rolled steel
1 Scope
This section GB/T 25874 specifies the use of cold-rolled steel sheet dents dimensions, materials, requirements and marking.
This section applies to dents cold rolled steel.
2 Dimensions
Dent cold-rolled steel sheet with dimensions shown in Figure 1 and Table 1.
b --- width;
s --- thickness.
1 cold-rolled steel cross-sectional view
Table 1 cold-rolled steel sheet dimensions and tolerances in millimeters
sb
Size tolerance 3 ± 0.04 4 ± 0.04 (5 ± 0.05) 6 ± 0.05 8 ± 0.06 (10 ± 0.075) 12 ± 0.075
0.1
0.11
0.12
0.13
0.14
0.16
0.18
0.2
± 0.005
0.22
0.23
0.26
0.28
0.31
0.34
± 0.007
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25874.1-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 25874.1-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 25874.1-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25874.1-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|