|
US$529.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 19638.1-2014: Lead-acid batteries for stationary valve-regulated -- Part 1: Technical requirements
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 19638.1-2014 | English | 529 |
Add to Cart
|
4 days [Need to translate]
|
Lead-acid batteries for stationary valve-regulated -- Part 1: Technical requirements
| Valid |
GB/T 19638.1-2014
|
PDF similar to GB/T 19638.1-2014
Basic data | Standard ID | GB/T 19638.1-2014 (GB/T19638.1-2014) | | Description (Translated English) | Lead-acid batteries for stationary valve-regulated -- Part 1: Technical requirements | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K84 | | Classification of International Standard | 29.220.20 | | Word Count Estimation | 23,215 | | Date of Issue | 6/24/2014 | | Date of Implementation | 1/22/2015 | | Older Standard (superseded by this standard) | GB/T 19638.2-2005 | | Quoted Standard | GB/T 2408-2008; GB/T 2900.41; GB/T 19638.2-2014; GB/T 23754 | | Adopted Standard | IEC 60896-22-2004, MOD | | Regulation (derived from) | National Standards Bulletin No. 14 of 2014 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies the fixed type VRLA technical requirements, test methods, inspection rules, marking, packaging, transport and storage. This section applies in the rest of the place, and combined with the use of fixed equipment floating or fixed in | GB/T 19638.1-2014: Lead-acid batteries for stationary valve-regulated -- Part 1: Technical requirements
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Lead-acid batteries for stationary valve-regulated Part 1. Technical requirements
ICS 29.220.20
K84
National Standards of People's Republic of China
Replacing GB/T 19638.2-2005
Fixed type VRLA
Part 1. Technical conditions
Part 1. Technicalrequirements
(IEC 60896-22.2004, Stationarylead-acidbatteries-
Part 22. Valveregulatedtypes-Requirements, MOD)
Issued on. 2014-06-24
2015-01-22 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 Symbols 2
5 2 Technical Requirements
5.1 Structural requirements 2
5.2 Safety requirements 3
5.3 Use of claim 3
5.4 durability requirements 4
6 Inspection Method 5
6.1 Measuring Instruments 5
6.2 Test preparation before 6
6.3 appearance, quality inspection 6
Check 6 6.4 Dimensions
6.5 polarity test 6
6.6 tightness test 6
Amount of gas evolved 6.7 Test 6
6.8 resistant to high current capability test 7
6.9 short-circuit current and DC resistance test 7
6.10 Explosion Proficiency Test 8
6.11 Test anti-mist capacity 8
6.12 Test relief valve 9
6.13 resistance capacity test is shorted to ground 10
Flame retardancy test materials 10 6.14
6.15 Proficiency Test against mechanical damage 10
Balancing test terminal voltage of 10 6.16
Capacity performance test 10 6.17
Connectivity between 6.18 single cell test 11
6.19 11 charge retention performance test
6.20 recharge performance test 11
6.21 discharge cycle durability test 12
6.22 40 ℃ float durability test 12
6.23 60 ℃ float durability test 12
6.24 thermal runaway sensitivity test 12
6.25 low temperature sensitivity test 13
Existence and durability test 6.26 Information and warning marks 13
7 Inspection rules 13
8 signs, packaging, transportation and storage 15
8.1 Marking 15
8.2 Packaging 16
8.3 Transport 16
8.4 Storage 16
8.5 Precautions when using 16
Appendix A (informative) on the quality of the battery limit, lower limit 17
Foreword
GB/T 19638 "Fixed type VRLA batteries" is divided into two parts.
--- Part 1. Technical conditions;
--- Part 2. product varieties and specifications.
This section GB/T 19638 Part 1.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This Part replaces GB/T 19638.2-2005 "stationary VRLA batteries."
This portion of the GB/T 19638.2-2005 compared to the main part of the following changes.
--- Increase the "ambient temperature" "floating battery (group)" "fully charged" "actual capacity" and the definition (see Chapter 3);
--- Modify the battery quality reference value, tied to informative annex;
--- Modify the flame resistance of technical requirements and test methods for materials (see 5.2.8,6.14);
--- Increased connectivity between single-cell technology requirements and test methods (see 5.3.3,6.18);
--- Remove the voltage drop connection technical requirements (see the 2005 version 6.3.3);
--- Remove the overcharge resistance capability technical requirements (see 2005 Version 6.3.4);
--- Remove the overcharge cycle durability technical requirements (see 2005 Version 6.4.1.2);
--- Cycle durability revised technical requirements and test methods (see 5.4.1,6.22,6.23);
--- Modify the sensitivity of technical requirements and test methods for thermal runaway (see 5.4.2,6.24);
--- Modify the low sensitivity of technical requirements and test methods (see 5.4.3,6.25);
--- Modify the amount of gas evolved test methods (see 6.7);
--- Modify the capacity performance test methods (see 6.17);
--- Modify the charge retention performance test methods (see 6.19).
--- Increased YD/T 799-2010 "Communication with VRLA batteries," the "battery terminal voltage balance" requirement
And test methods (see 5.3.1,6.16).
This section uses redrafted law revision of international standards IEC 60896-22.2004 "Fixed lead-acid batteries - Part 22. Valve Control
Type test methods. "
This part of IEC 60896-22.2004 compared to the technical differences and the reasons are as follows.
--- IEC 60896-22.2004 "Fixed lead-acid batteries - Part 22. valve-regulated type test method" provides for a total of 21 technical
Requirements and test methods; This standard uses of which 17 technical requirements and test methods (which equivalent to 12 to modify mining
With five), there are four requirements are not adopted.
Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.
This part is proposed by the China Electrical Equipment Industrial Association.
The lead-acid batteries in part by the National Standardization Technical Committee (SAC/TC69) centralized.
This part mainly drafted by. Leoch Battery Co., Ltd. Jiangsu double Deng Group Co., Ltd., Shandong Sacred Sun Power Company Limited
Secretary, Shenyang Institute of batteries, Harbin Guangyu Battery Co., Ltd., Zhejiang Wolong Electric Group Beacon Power Co., the Department of Shaoxing
With Battery Co., Ltd., Jiangsu Fu new energy storage technologies Co., Ltd., Fujian Province, China Fujian Power Company Limited, Hunan Fengri power
Electric Co., Ltd. days to Battery Group, AMD Power Co., Ltd., Jiangsu Su in Battery Technology Development Co., Ltd., Beijing
Force Standard Technology Co., Ltd, Changxing County, battery industry associations, national light electric vehicles and battery Product Quality Supervision and Inspection Center, Taizhou
City of Quality and Technical Supervision and Testing Institute, Zhejiang green power supply product quality inspection center.
Participated in the drafting of this section. Jiang Su Chaowei Power Co., Ltd., Zhejiang Jiang Jujiang Power Manufacturing Co., Ltd., Zhejiang Electric Co., Jester
The company, Henan AMD Power Co., Ltd. Zhejiang Changxing Power Co., Ltd. Golden Sun, Huzhou long wide Haotian Power Co., Ltd. Changxing into the public electricity
Source Co., Ltd. Anhui eternal power, prestige Jiangxi Power Energy Technology Co., Ltd.
The main drafters of this section. Iraq Xiaobo, Dong Jie, Xue Yu, Ruan Li, Xue Kui network, Zhouqing Shen, Xing Kai, Zhu Weimin, Zhu Wenwu, Spring Hill home, I'm the tree,
Li Lihua, Fang Ming learn new Yang Xin, Shen Restoration, Liu Ning, Yang Yuanling, Zang Ning.
The drafters of some of the participants. the mother Jianping, Wu Zhanguo, Xuren Xian, firewood into mine, open subtlety, holding Shen Di, Qian Shun-wing, Wurong Liang, Xu years.
This part of the standard replaces the previous editions.
--- GB/T 19638.2-2005.
Fixed type VRLA
Part 1. Technical conditions
1 Scope
This section GB/T 19638 specifies the fixed-type VRLA battery of technical requirements, test methods, inspection rules, marks, packages
Loading, transport and storage.
This section applies to and in conjunction with the fixed equipment in stationary places together using float or fixed in the battery compartment to pass
Letter, switching equipment, power, emergency power and uninterruptible power supply or a similar use of all fixed-type VRLA batteries (hereinafter referred to as the accumulator
Batteries) and batteries. Sulfuric acid electrolyte in the battery is not flowing, or adsorbed on the pore structure between the electrodes or in colloidal form.
This section does not apply to start with, and general storage use lead-acid batteries and batteries and so on.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2408-2008 Plastics - Determination of burning behavior of horizontal and vertical (IEC 60695-11-10.1999, IDT)
GB/T 2900.41 Electrotechnical terminology primary cells and batteries (GB/T 2900.41-2008, IEC 60050 (482).2003, IDT)
GB/T 19638.2-2014 stationary VRLA batteries - Part 2. Product varieties and specifications
GB/T 23754 lead-acid battery slot
3 Terms and Definitions
GB/T 2900.41 define the following terms and definitions apply to this document.
3.1
Ambient temperature ambienttemperature
5mm around the battery or batteries within the medium temperature.
3.2
Floating battery (group) floatingbattery
Battery (group) terminal is permanently connected to a constant voltage, which is sufficient to maintain a constant voltage battery (group) remains fully charged
State, when the normal power supply is temporarily interrupted, battery (group) can provide electricity.
3.3
Fully charged fulcharge
Battery all active substances available have been transformed into full state of charge.
3.4
Actual capacity actualcapacity
Under the conditions specified discharge rate, discharge termination voltage and temperature, battery or battery output power, in ampere hours
(Ah) represented.
|