GB/T 5008.3-2023 PDF English
Search result: GB/T 5008.3-2023_English: PDF (GB/T5008.3-2023)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 5008.3-2023 | English | 230 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Lead-acid starter batteries -- Part 3: Kinds of products and specifications and dimensions and marking of terminals for heavy vehicles
| Valid |
| GB/T 5008.3-2005 | English | 235 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Starter batteries terminal size and markings
| Obsolete |
| GB/T 5008.3-1991 | English | 165 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Lead-acid starter batteries--Dimension and marking of terminals
| Obsolete |
BUY with any currencies (Euro, JPY, GBP, KRW etc.): GB/T 5008.3-2023 Related standards: GB/T 5008.3-2023
PDF Preview: GB/T 5008.3-2023
PDF Preview: GB/T 5008.3-2005
PDF Preview: GB/T 5008.3-1991
GB/T 5008.3-2023: PDF in English (GBT 5008.3-2023) GB/T 5008.3-2023
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 29.220.20
CCS K 84
Lead-acid Starter Batteries - Part 3: Kinds of Products and
Specifications and Dimensions and Marking of Terminals for
Heavy Vehicles
(IEC 60095-4:2021, Lead-acid starter batteries - Part 4: Dimensions of batteries for
heavy vehicles, MOD)
ISSUED ON: NOVEMBER 27, 2023
IMPLEMENTED ON: JUNE 1, 2024
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
Introduction ... 5
1 Scope ... 6
2 Normative References ... 6
3 Terms and Definitions ... 6
4 Common Characteristics ... 7
5 European Series ... 7
6 North American Series ... 9
7 East Asian Series ... 11
Appendix A (informative) Comparison of Structural No. between This Document and
IEC 60095-4:2021 ... 14
Appendix B (informative) Technical Differences between This Document and IEC
60095-4:2021, and Their Causes ... 16
Foreword
This document was drafted in accordance with the rules provided in GB/T 1.1-2020 Directives
for Standardization - Part 1: Rules for the Structure and Drafting of Standardizing Documents.
This document is Part 3 of GB/T 5008 Lead-acid Starter Batteries. GB/T 5008 has issued the
following parts:
---Part 1: Technical Conditions and Methods of Test;
---Part 2: Dimensions of Batteries and Dimensions and Marking of Terminals;
---Part 3: Kinds of Products and Specifications and Dimensions and Marking of Terminals
for Heavy Vehicles.
This document modifies and adopts IEC 60095-4:2021 Lead-acid Starter Batteries - Part 4:
Dimensions of Batteries for Heavy Vehicles.
In comparison with IEC 60095-4:2021, there are many structural adjustments. A comparison of
structural No. changes between the two documents is shown in Appendix A.
In comparison with IEC 60095-4:2021, there are many technical differences. The clauses
involved are marked with a single vertical line () in the outer margin. A list of these technical
differences and their causes is shown in Appendix B.
This document makes the following editorial modifications:
---In order to coordinate with the existing standards, the title of the Standard is modified
into Lead-acid Starter Batteries - Part 3: Kinds of Products and Specifications and
Dimensions and Marking of Terminals for Heavy Vehicles;
---IEC 61429 and ISO 7000 are deleted from the Bibliography.
Please be noted that certain content of this document may involve patents. The institution
issuing this document does not undertake the responsibility of identifying these patents.
This document was proposed by China Electrical Equipment Industry Association.
This document shall be under the jurisdiction of National Technical Committee on Lead Acid
Batteries of Standardization Administration of China (SAC/TC 69).
The drafting organizations of this document: Shandong Jiuli New Energy Group Co., Ltd.;
Anhui LEOCH Battery Technology Co., Ltd.; Tianneng Battery Group Co., Ltd.; Zhejiang
Guyue Battery Co., Ltd.; Fengfan (Yangzhou) Co., Ltd.; CHILWEE Group Co., Ltd.; Zhaoqing
Leoch Battery Technology Co., Ltd.; Jiangxi HEROU Power Supply Technology Co., Ltd.;
Zhejiang Narada Power Source Co., Ltd.; Zhejiang Jujiang Power Manufacturing Co., Ltd.;
Guangdong Aokly Group Co., Ltd.; Ningbo Donghai Storage Battery Co., Ltd.; Zhushan
Lead-acid Starter Batteries - Part 3: Kinds of Products and
Specifications and Dimensions and Marking of Terminals for
Heavy Vehicles
1 Scope
This document specifies the dimensions and model designation, terminal polarity marking,
battery model and classification, and battery terminal dimensions of lead-acid starter batteries
for heavy vehicles (hereinafter referred to as the batteries).
This document is applicable to vented (liquid-rich) batteries and valve-controlled (with gas
composite function) batteries with a rated voltage of 12 V, and used for the starting, ignition
and illumination of various types of heavy-duty vehicles, tractors and other internal combustion
engines.
This document does not apply to batteries used for other purposes, for example, batteries for
starting heavy vehicles of railway internal combustion engines.
2 Normative References
The contents of the following documents constitute indispensable clauses of this document
through the normative references in the text. In terms of references with a specified date, only
versions with a specified date are applicable to this document. In terms of references without a
specified date, the latest version (including all the modifications) is applicable to this document.
GB/T 2900.41 Electrotechnical Terminology - Primary and Secondary Cells and Batteries
(GB/T 2900.41-2008, IEC 60050-482:2003, IDT)
GB/T 5008.1 Lead-acid Starter Batteries - Part 1: Technical Conditions and Methods of Test
(GB/T 5008.1-2023, IEC 60095-1:2018, MOD)
GB/T 5008.2 Lead-acid Starter Batteries - Part 2: Dimensions of Batteries and Dimensions and
Marking of Terminals (GB/T 5008.2-2023, IEC 60095-2:2021, MOD)
3 Terms and Definitions
The terms and definitions defined in GB/T 2900.41 are applicable to this document.
4 Common Characteristics
4.1 Marking of Batteries
The marking of the batteries shall comply with the stipulations of GB/T 5008.1.
4.2 Terminal Polarity Marking of Batteries
The terminal polarity marking of the batteries shall comply with the stipulations of GB/T
5008.2.
4.3 Marking of Battery Slot and Cover Materials
The marking of battery slot and cover materials shall comply with the stipulations of GB/T
5008.1.
4.4 Dimensions and Structure of Batteries
The dimensions of the batteries are expressed in (mm). In this document, “Figure” refers to
schematic diagram, and there are no requirements for the shape of the battery slot and cover,
the handle, ribs, lower fixation shape and exhaust hole position.
4.5 Terminal Dimensions of Batteries
The terminal dimensions of the batteries shall comply with the stipulations of GB/T 5008.2.
4.6 Suggestions for New Vehicle Accessories
For future new developments of heavy-duty vehicles, it is advisable to use only the battery
models in this document. The battery models are classified in accordance with Europe, North
America and East Asia.
5 European Series
5.1 Overview
This product is applicable to batteries used in Europe. The series is codenamed “EU”. Four
types are included in the series.
5.2 Battery Fixation
The battery is fixed through the upper fixation.
5.3 Terminal Configuration and Polarity
The transverse arrangement and polarity position of the battery terminals shall comply with the
stipulations of Figure 1. The longitudinal arrangement and polarity position of the battery
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|