|
US$649.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17304-2009: Specification for CAD general technology
Status: Valid GB/T 17304: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 17304-2009 | English | 649 |
Add to Cart
|
5 days [Need to translate]
|
Specification for CAD general technology
| Valid |
GB/T 17304-2009
|
| GB/T 17304-1998 | English | 919 |
Add to Cart
|
6 days [Need to translate]
|
Specification for CAD general technology
| Obsolete |
GB/T 17304-1998
|
PDF similar to GB/T 17304-2009
Basic data | Standard ID | GB/T 17304-2009 (GB/T17304-2009) | | Description (Translated English) | Specification for CAD general technology | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L67 | | Classification of International Standard | 35.240.50 | | Word Count Estimation | 28,236 | | Date of Issue | 2009-05-06 | | Date of Implementation | 2009-11-01 | | Older Standard (superseded by this standard) | GB/T 17304-1998 | | Quoted Standard | GB/T 13016 | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 6, 2009 (No. 146 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard provides a common CAD technology standardized content and technology should be used to achieve a common CAD standards. This standard applies to CAD software development, product design and CAD CAD technology application conformance testing, but also for other related field reference. | GB/T 17304-2009: Specification for CAD general technology---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Specification for CAD general technology
ICS 35.240.50
L67
National Standards of People's Republic of China
Replacing GB/T 17304-1998
CAD General technical specifications
Posted 2009-05-06
2009-11-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
Introduction Ⅱ
1 Scope 1
2 Normative references 1
3 Terms, Definitions and Abbreviations 1
3.1 Terms and definitions
3.2 Abbreviations 1
Overview 4 1
5 CAD software development 2
5.1 computer graphics systems standard 2
5.2 CAD Technical Drawing Standard 2
5.3 Product technical standards for data 3
5.4 CAD file management and archiving standard 3
5.5 Other standard 4
5.6 Related Standards 4
6 CAD Technology 5
6.1 CAD Technical Drawing Standard 5
6 6.2 Product technical standards for data
6.3 CAD electronic documents and archiving standards 6
6.4 Other criteria 6
6.5 Related Standards 7
7 7 Conformance Testing
7.1 The basic principles and methods Standard 7
7.2 CAD Technical Drawing Standard 7
7.3 Product technical standards for data 8
7.4 CAD Chinese system standard 8
7.5 CAD file storage system standard 8
7.6 computer graphics system standard 8
Appendix A (Informative Appendix) CAD universal standard framework 10
Appendix B (Informative Appendix) CAD General Standard Listing 13
Annex C (informative) standardization trends CAD 17
References 22
Foreword
This standard replaces GB/T 17304-1998 "CAD General technical specifications." This standard and GB/T 17304-1998 major change compared to
Of the following.
--- Amend the foreword;
--- Increased introduction;
--- According to GB/T 1.1-2000 requirements of Chapter 2 has been modified;
--- The GB/T 17304-1998 in Chapters 3 and 4 are combined into Chapter 3;
--- 5.2.3 modify the contents;
--- 5.4.3 modify the contents;
--- 5.6.1.3 modified contents;
--- 5.6.2.3 modified contents;
--- Revised Appendix B B. Content 5;
--- Revised Appendix B B. Content 6;
--- Revised Appendix C content.
--- CAD technology applications;
--- CAD conformance testing.
The three parts of the standard should be implemented in the case of overlap, but the angle of the standard consumer standard of interest is different. Such as
CAD drawings concerned enterprise software to draw compliance with national technical drawing standard, developers will focus on technical details of each
How to achieve standards. Therefore, this standard different sections will be repeated the same content, but will be in the description of each part of the application
With emphasis on the application will be described.
Due to the special nature of this standard, it listed a number of national and international standards and CAD-related in its content. These standards
National Library of Standards Administration of Quality Supervision, Inspection and Quarantine belongs can be found.
CAD General technical specifications
1 Scope
This standard provides standardized content CAD common technology and common standards of CAD technology should be used.
This standard applies to CAD software development, product design and application of CAD technology CAD conformance testing, but also for other relevant areas
Domain reference.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 13016 standard system preparation principles and requirements
3 Terms, definitions and abbreviations
3.1 Terms and Definitions
The following terms and definitions apply to this standard.
3.1.1
Test test product treated in accordance with the specific features of the standard set forth in order to determine the degree of consistency of the product as the consistency of implementation.
[GB/T 16656.31-1997]
3.1.2
Data sets and programs are identified, it can generate a set of parts information.
[GB/T 17645.1-2008]
3.1.3
In the formal description of product data technology and data products on the exchange of information.
Note. The "Product data representation and exchange" is the official name of ISO 10303. Correspondingly, our standard number is GB/T 16656. The standard has a
Widely used but unofficial name. product model data exchange standards StandardfortheExchangeofProductModelData
(STEP)
3.2 Acronyms
The following abbreviations apply to this standard.
CAD. Computer Aided Design ComputerAidedDesign
CAx. Computer Aided Test Tool ComputerAidedTools
PLIB. Library PartsLibrary
STEP. product model data exchange standards StandardfortheExchangeofProductModelData
4 Overview
This standard consists of three parts, namely the development of CAD software, CAD and CAD technology application compliance testing. For ease of explanation, rationale
Solutions, references, and the use of this standard, the above various parts of the standard adopted a unified narrative, consists of the following components.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17304-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 17304-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 17304-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17304-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 17304-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17304-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|