|
US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14624.3-2008: Test method for fluidity of offset ink
Status: Valid GB/T 14624.3: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 14624.3-2008 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
Test method for fluidity of offset ink
| Valid |
GB/T 14624.3-2008
|
| GB/T 14624.3-1993 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Test method for fluidity of printing inks
| Obsolete |
GB/T 14624.3-1993
|
PDF similar to GB/T 14624.3-2008
Basic data | Standard ID | GB/T 14624.3-2008 (GB/T14624.3-2008) | | Description (Translated English) | Test method for fluidity of offset ink | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y44 | | Classification of International Standard | 87.080 | | Word Count Estimation | 8,813 | | Date of Issue | 2008-12-30 | | Date of Implementation | 2009-09-01 | | Older Standard (superseded by this standard) | GB/T 14624.3-1993 | | Regulation (derived from) | National Standard Approval Announcement 2008 No.24 (Total No.137) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies test methods degree offset ink flow. This section applies to offset ink fluidity test. | GB/T 14624.3-2008: Test method for fluidity of offset ink---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method for fluidity of offset ink
ICS 87.080
Y44
National Standards of People's Republic of China
Replacing GB/T 14624.3-1993
Offset printing ink fluidity test method
Posted 2008-12-30
2009-09-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 14624 in this section instead of GB/T 14624.3-1993 "ink fluidity test method."
This portion of the GB/T 14624.3-1993 The main differences are as follows.
--- Standard name was changed to "offset inks fluidity test methods";
--- Ambient temperature index has been adjusted to cancel the humidity requirements.
This part is proposed by the China National Light Industry Council.
This part of the National Standardization Technical Committee under the jurisdiction of the ink.
This section is drafted. Hangzhou Toka Ink Chemical Co., Ltd., Taiyuan, Gao Laurie Ink Chemical Co., Ltd. Zhejiang Yong Chemical Co.
The company, Tianjin Toyo Ink Co., Ltd., the state printing and decorating products Quality Supervision and Inspection Center.
The main drafters of this section. Huangrong Hai, Tian Jianzhong, Wu Min, Zhang Jinmei, Su Zhuanjian.
This part of the standard replaces the previous editions are.
--- GB/T 14624.3-1993.
Offset printing ink fluidity test method
1 Scope
GB/T 14624 in the test methods specified in this part of the offset printing ink flowability.
This section applies to offset printing ink fluidity test.
Principle 2
Sample a volume of ink at a predetermined pressure by a certain time, which extended into a cylinder diameter in mm's.
3 Tools and Materials
3.1 palette knife.
3.2 glass.
3.3 scrubbing solvent. ethanol.
3.4 cotton yarn.
3.5 ink suction tube. capacity 0.1mL.
3.6 transparent ruler. dividing the value of 1mm.
3.7 fluidity tester (produced by a mass of 200g ± 0.05g of five weight, etc., two mass of 50g ± 0.05g, thickness of 5mm ~
6mm, 65mm ~ 70mm smooth surface of the glass circle diameter and composed of a metal mounting plate, see Fig. 1).
1 --- prevent glass sliding metal fixed disk;
2,4 --- the quality of the circular glass 50g;
3 --- tested ink;
5 --- quality 200g weight.
Figure 1 Flow Tester
3.8 timer.
4 Conditions
Test should be carried out at a temperature of (23 ± 2) ℃ conditions.
Step 5 Test
5.1 ink samples and fluidity tester should be placed in advance heated indoor heat 20min.
5.2 with a palette knife to take samples of the ink 4g ~ 5g, mobilized 15 times on a glass plate (round trip time), with the ink absorbing pipe draw sample 0.1mL,
The nozzle and scrape around the remainder of the ink, and the sample nozzle flush tube ink shall not contain air bubbles.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14624.3-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 14624.3-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 14624.3-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14624.3-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 14624.3-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14624.3-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|