Path: Home > YY/T > Page19 > YY/T 1978-2025 || Home > Standard_List > YY/T > Page19 > YY/T 1978-2025 Price & DeliveryUS$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
YY/T 1978-2025: Dentistry - Trephine burs
Status: Valid
| Std ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status |
| YY/T 1978-2025 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Dentistry - Trephine burs
| Valid |
Standard similar to YY/T 1978-2025 YY/T 1692 | YY/T 1691 | YY/T 1702 | YY/T 1972 | YY/T 1971.1 | Basic data | Standard ID | YY/T 1978-2025 (YY/T1978-2025) | | Description (Translated English) | Dentistry - Trephine burs | | Sector / Industry | Medical Device & Pharmaceutical Industry Standard (Recommended) | | Classification of Chinese Standard | C33 | | Classification of International Standard | 11.060.20 | | Word Count Estimation | 14,160 | | Date of Issue | 2025-06-18 | | Date of Implementation | 2026-07-01 | | Issuing agency(ies) | National Medical Products Administration | | Summary | This standard specifies the requirements for dental trephine drills used in oral implant surgeries (such as bone harvesting or implant removal), provides classifications, describes corresponding test methods, and specifies requirements for marking, labeling, and instructions for use. This document applies to dental trephine drills used in oral implant surgeries. | YY/T 1978-2025: Dentistry - Trephine burs---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 11.060.20
CCSC33
Pharmaceutical Industry Standards of the People's Republic of China
Dental trephine
(ISO 20569.2018, MOD)
Published on 2025-06-18
Implemented on July 1, 2026
National Medical Products Administration issued
Table of contents
Preface III
Introduction IV
1.Scope 1
2 Normative References 1
3.Terms, Definitions, and Symbols 1
3.1 Terms and Definitions 1
3.2 Symbol 1
4.Classification 2
5 Requirements 3
5.1 Selection of Metallic Materials 3
5.2 Surface 3
5.3 Dimensions 3
5.3.1 Number of teeth. 3
5.3.2 Diameter and wall thickness of the working part 3
5.3.3 Length of L3 3
5.3.4 Total Length 4
5.3.5 Rod Dimensions 4
5.4 Marking lines for the operating section 4
5.4.1 General Requirements 4
5.4.2 Marker line width 4
5.5 Tolerance to Repeated Treatments 4
5.6 Vickers hardness 4
5.7 Radial runout 4
5.8 Torsional resistance 4
6.Test Methods 5
6.1 Visual inspection 5
6.2 Dimensions and Number of Teeth 5
6.3 Tolerance to repeated treatments 5
6.4 Vickers hardness 5
6.5 Radial runout 5
6.6 Torsional resistance 5
7.Markings, labels, and instructions for use 5.
7.1 Markings on the treble drill 5
7.2 Packaging Labels 6
7.3 Instruction Manual 6
Appendix A (Informative) Example of component clamping in torsional performance test 7
References 8
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents".
Drafting.
This document is modified to adopt ISO 20569.2018 "Dental Science - Tremming".
The technical differences between this document and ISO 20569.2018, and the reasons therefor, are as follows.
---The scope of application has been expanded (see Chapter 1) to better suit my country's technological conditions and increase operability;
---ISO 1942 has been replaced with the normatively referenced GB/T 9937 (see Chapter 3) to adapt to my country's technical conditions and increase operability.
Actual nature;
---ISO 16443 (see Chapter 3) has been replaced with the normatively referenced YY/T 1619 to adapt to my country's technical conditions and add [further details needed].
Operability;
---ISO 1797 (see Chapter 3, 5.3.5) has been replaced with the normatively referenced YY/T 0967 to adapt to my country's technical conditions, and has been improved.
Increase operability;
---ISO 7153-1 (see 5.1) has been replaced with the normatively referenced YY/T 0294.1 to adapt to my country's technical conditions and increase operability.
Actual nature;
--- Added normative reference YY/T 1952.1 (see 5.1) to better align with the dental standards system;
---ISO 13504 (see 5.1, 7.1~7.3) has been replaced by the normatively referenced YY/T 1486 to adapt to my country's technical conditions, and has been improved.
Increase operability;
---ISO 17664 (see 6.3) has been replaced with the normatively referenced YY/T 0802 to adapt to my country's technical conditions and increase operability.
Actual nature;
---ISO 6507-1 (see 6.4) has been replaced with the normatively referenced GB/T 4340.1 to adapt to my country's technical conditions and increase operability.
Acting.
The following editorial changes have been made to this document.
---In section 3.2, L3 was changed from "length of the operating section" to "length of the operating section and the working section";
---Added a note for 5.3.3;
---5.3.3 Change "Length of the operation section" in the title and content to "L3";
---Added the corresponding chapter/section number for the test methods in 5.3.4;
---In Figure 3 of section 5.7, "0.08" is changed to "0.1", "AB" is changed to "AB", and "10" is changed to "≥10";
---Added note 6.6 and Appendix A;
---The preface to ISO 20569.2018 has been removed.
Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents.
This document was proposed by the National Medical Products Administration.
This document was prepared by the National Technical Committee on Standardization of Dental Materials and Instruments, Subcommittee on Dental Equipment and Instruments (SAC/TC99/
SC1) is under the jurisdiction of the relevant authorities.
This document was drafted by. Guangdong Provincial Institute of Medical Device Quality Supervision and Inspection, Guangzhou Xifu Medical Equipment Co., Ltd., and Shenzhen Suhang Technology.
Development Limited Company.
The main drafters of this document are. Shen Lisi, Ke Jun, Feng Shan, Xiao Yanping, Zhang Degui, Cheng Juan, Wang Zhong, Bai Xue, Lin Yuanqing, and Deng Yuanda.
Introduction
A dental trephine is a dental instrument used for dental implants.
Dental trephine
1 Scope
This document specifies the requirements for dental trephine drills used in oral implant surgeries (such as bone harvesting or implant removal), and provides a classification and description.
The corresponding test methods are described, and the requirements for marking, labeling, and instructions for use are also specified.
This document applies to dental trephine drills used in dental implant surgery.
2 Normative references
The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.
For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.
This document.
GB/T 4340.1 Metallic materials – Vickers hardness test – Part 1.Test methods (GB/T 4340.1-2009, ISO 6507-
1.2005, MOD)
GB/T 9937 Terminology in Dentistry (GB/T 9937-2020, ISO 1942.2009, MOD)
YY/T 0294.1 Surgical Instrument Materials - Part 1.Metallic Materials (YY/T 0294.1-2024, ISO 7153-1.
2016, MOD)
YY/T 0802 Handling of Medical Devices - Information provided by medical device manufacturers (YY/T 0802-2020, ISO 17664.
2017, MOD)
YY/T 0874-2013 Test methods for dental rotating instruments (ISO 8325.2004, IDT)
YY/T 0967 Rods for dental rotary and reciprocating instruments (YY/T 0967-2022, ISO 1797.2017, MOD)
YY/T 1486 General Requirements for Instruments and Related Auxiliary Instruments for Dental Implants (YY/T 1486-2016)
ISO 13504.2012, IDT
YY/T 1619 Terminology for Dental Implant Systems and Related Processes (YY/T 1619-2018, ISO 16443.2014, IDT)
YY/T 1952.1 Dental Science - Materials for Dental Instruments - Part 1.Stainless Steel (YY/T 1952.1-2024, ISO 21850-1.
2020, MOD)
3.Terms, Definitions and Symbols
3.1 Terms and Definitions
The terms and definitions defined in GB/T 9937, YY/T 0967 and YY/T 1619, as well as the following terms and definitions, apply to this document.
3.1.1
trephinebur
Rotating instruments used with dental handpieces for preparation, bone harvesting, or implant removal during oral implant surgery.
3.2 Symbols
The following symbols apply to this document.
D1---Outer diameter of the working part
D2---Inner diameter of the working part
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of YY/T 1978-2025_English be delivered?Answer: Upon your order, we will start to translate YY/T 1978-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of YY/T 1978-2025_English with my colleagues?Answer: Yes. The purchased PDF of YY/T 1978-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |