| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| LY/T 1802-2008 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
General specification for cement(gypsum)particle board press
| Obsolete |
LY/T 1802-2008
|
PDF similar to LY/T 1802-2008
Basic data | Standard ID | LY/T 1802-2008 (LY/T1802-2008) | | Description (Translated English) | General specification for cement(gypsum)particle board press | | Sector / Industry | Forestry Industry Standard (Recommended) | | Classification of Chinese Standard | B97 | | Classification of International Standard | 79.120.99 | | Word Count Estimation | 8,885 | | Date of Issue | 2008-09-03 | | Date of Implementation | 2008-12-01 | | Quoted Standard | GB/T 191; GB/T 1184-1996; GB/T 3766; GB 5226.1; GB/T 7932; GB/T 13306; GB/T 13384; GB/T 18262 | | Regulation (derived from) | Industry standard filing Notice No. 10 of 2008 | | Issuing agency(ies) | State Forestry Administration | | Summary | This standard specifies the cement (gypsum) particleboard press parameters, requirements, inspection rules and signs, packaging and storage. This standard applies to flat-pressure cold cement (gypsum) particleboard press. | LY/T 1802-2008: General specification for cement(gypsum)particle board press---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General specification for cement(gypsum)particle board press
ICS 79.120.99
B97
People's Republic of China Forestry Industry Standard
General technical conditions for cement (gypsum) particleboard presses
Released on.2008-09-03
2008-12-01 implementation
State Forestry Administration released
Foreword
This standard is proposed and managed by the National Technical Committee for Wood-based Panel Machinery Standardization.
This standard was drafted. Harbin Forestry Machinery Factory.
The main drafters of this standard. Li Ning, Yu Shanfu, Wu Heping, Li Hui.
General technical conditions for cement (gypsum) particleboard presses
1 Scope
This standard specifies the parameters, requirements, inspection rules and signs, packaging and storage of cement (gypsum) particleboard presses.
This standard is applicable to the press of cold pressing to produce cement (gypsum) particleboard.
2 Normative references
The terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all
Modifications (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study
Is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard.
GB/T 191 packaging storage and transportation pictorial signs (GB/T 191-2008, ISO 780.1997, MOD)
GB/T 1184-1996 Shape and position tolerances without tolerance values (eqv ISO 2768-2.1989)
GB/T 3766 hydraulic system general technical conditions (GB/T 3766-2001, eqv ISO 4413.1998)
GB 5226.1 Mechanical safety machinery and electrical equipment - Part 1. General technical conditions (GB 5226.1-2002, IEC 60204-
1.2000, IDT)
General technical conditions for GB/T 7932 pneumatic system (GB/T 7932-2003, ISO 4414.1998, IDT)
GB/T 13306 signage
General technical conditions for GB/T 13384 mechanical and electrical product packaging
General technical conditions for GB/T 18262 wood-based panel machinery
3 sketch
A schematic diagram of the cement (gypsum) particleboard press structure is shown in Figure 1.
1---rack;
2---main cylinder;
3---active beam;
4---uplocking device;
5---mode-locking;
6---lower locking device;
7---lifting cylinder;
8---roller table;
9---mode-locking centering device;
10---locking frame;
11---pins.
Note. This figure does not limit the specific structure of the cement (gypsum) particleboard press.
Figure 1 Schematic diagram of cement (gypsum) particleboard press
|