HOME   Cart(12)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

JJF 1154-2014 English PDF

US$489.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJF 1154-2014: Calibration Specification for Four-wheel Aligners
Status: Valid

JJF 1154: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JJF 1154-2014English489 Add to Cart 4 days [Need to translate] Calibration Specification for Four-wheel Aligners Valid JJF 1154-2014
JJF 1154-2006English679 Add to Cart 5 days [Need to translate] Calibration Specification for Four-wheel alignmenter Obsolete JJF 1154-2006

PDF similar to JJF 1154-2014


Standard similar to JJF 1154-2014

JJG 1114   JJF 1280   JJF 1126   JJG 1150   JJG 1152   JJG 1154   

Basic data

Standard ID JJF 1154-2014 (JJF1154-2014)
Description (Translated English) Calibration Specification for Four-wheel Aligners
Sector / Industry Metrology & Measurement Industry Standard
Classification of Chinese Standard A52
Classification of International Standard 17.140
Word Count Estimation 21,251
Date of Issue 11/17/2014
Date of Implementation 5/17/2015
Older Standard (superseded by this standard) JJF 1154-2006
Quoted Standard GB/T 3730.3; JT/T 505
Regulation (derived from) The State Administration of Quality Supervision, Inspection and Quarantine Notice 2014 No. 125
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine
Summary This Standard applies to wheel alignment (type photoelectric sensor wheel alignment, 3D image-based wheel alignment apparatus and online non-contact wheel alignment) calibration.

JJF 1154-2014: Calibration Specification for Four-wheel Aligners

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Calibration Specification for Four-wheel Aligners People's Republic of China National Metrology Technical Specifications Wheel alignment calibration specification Issued on. 2014-11-17 2015-05-17 implementation The State Administration of Quality Supervision, Inspection and Quarantine released Wheel alignment calibration specification Replacing JJF 1154-2006 NFP. National Engineering Geometrical Parameters Measurement Technology Committee Main drafting unit. Liaoning Provincial Institute of Metrology Supervision and Testing Nanjing hospital China Testing Technology Research Institute Participated in the drafting unit. Liaoning Province Product Quality Supervision and Inspection Institute Shanghai into a vehicle testing equipment Technology Co., Ltd. Jilin University This specification project commissioned by the National geometric parameter measurement technology committee responsible for the interpretation The main drafters of this specification. Zhang distant (Liaoning Provincial Institute of Metrology) Zhang Zijian (Liaoning Provincial Institute of Metrology) Qian Zheng (Nanjing Supervision and Testing Institute) Liu Mei Sheng (China Testing Technology Research Institute) Drafters participate. Zheng Zhong Yan (Liaoning Province Product Quality Supervision and Inspection Institute) Liu Jindong (Shanghai into a vehicle testing equipment Technology Co., Ltd.) Su Jian (Jilin University)

table of Contents

Introduction (Ⅱ) 1 Scope (1) 2. References (1) 3 Terms (1) 3.1 Single wheel toe angle (1) 3.2 camber (1) 3.3 caster angle (1) Within 3.4 kingpin inclination (1) 4 Overview (1) 5 Metrological characteristics (2) 5.1 Metrological characteristics and requirements (2) 5.2 clamp jaws plane probe axis (hole) of verticality (3) 6 calibration conditions (3) Environmental conditions 6.1 (3) 6.2 Main calibration equipment (3) 7 calibration items and calibration methods (4) 7.1 Calibration projects and calibration equipment (4) 7.2 Calibration method (4) 8 calibration results expression (8) 9 Recalibration interval (8) Appendix A wheel alignment before a single wheel toe angle measuring indication error Uncertainty Evaluation (9) B wheel alignment calibration method for calibrating device appendix (11) Appendix C calibration certificate content and in-page format (14)

Introduction

JJF 1154-2014 "wheel alignment calibration norms" (hereinafter referred to as "the Rules") is four Locator school Accurate measurement specifications. Wheel alignment automotive manufacturing and maintenance business for detecting a vehicle wheel alignment parameters, and Compared with the design parameters to guide the user to adjust the wheel alignment parameters of the instrument. JJF 1071-2010 "National Calibration Specifications writing rules", JJF 1059.1-2012 "Measurement Uncertainty Evaluation and Expression "and JJF 1001-2011" common measurement terms and definitions of "together constitute the support base of the code revision The foundation of the series specifications. This specification is based on JT/T 505-2004 "wheel alignment" as the main reference standard edition JJF 1154-2006 Subject to revisions. Compared with JJF 1154-2006 "wheel alignment", in addition to editorial changes, the major technological change as follows. --- Increased 3D image four-wheel locator and online non-contact wheel alignment in the scope, as well as Corresponding schematic. --- The technical requirements for wheel alignment calibration device, calibration device simulation clearly defined and simulated axes Tread Distance requirements, and other requirements indication error. --- Increasing the toe angle single round in the calibration project, camber zero error and Kingpin Inclination indication error calibration. --- On a single round before toe angle, camber, caster (inner) angle measurement range, showing error and repeat Sex has been modified. --- Increasing the wheel alignment calibration method calibration apparatus in Appendix B. The previous versions of this specification published case. --- JJF 1154-2006. Wheel alignment calibration specification

1 Scope

This instruction applies to wheel alignment (type photoelectric sensor wheel alignment, 3D images and in four-wheel locator Line non-contact wheel alignment) calibration. 2. References This specification references the following documents. GB/T 3730.3 vehicles and trailers of terms and their definitions vehicle size JT/T 505 wheel alignment For dated references, only the dated edition applies to this specification; undated reference documents Member, the latest edition (including any amendments) applies to this specification.

3 Terms

3.1 Single wheel toe angle individualwheeltoe-in The angle between the plane of rotation of the wheels of the vehicle longitudinal axis, the front edge of the wheel inward positive, negative outwardly. 3.2 Camber camber Wheel rotation angle between the plane and the vertical line, the wheel rotation on a flat surface edge outwardly positive, negative inwards. 3.3 Caster caster Front wheel steering axis angle between the longitudinal vertical projection line car surface and a vertical line, the upper end of the steering axis is back Positive and negative forward. 3.4 Kingpin Inclination kingpininclination Front-wheel steering angle axis transverse vertical projection line car surface and the vertical line, the upper end of the steering axis is inward Positive and negative outward.

4 Overview

Four Locator is the instrument used to detect vehicle wheel alignment parameters, the main form. four-wheel photoelectric sensor Locator, 3D image-based wheel alignment apparatus and online non-contact wheel alignment. Instruments such shape and structure, respectively Figure 1, Figure 2 and Figure 3.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJF 1154-2014_English be delivered?

Answer: Upon your order, we will start to translate JJF 1154-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJF 1154-2014_English with my colleagues?

Answer: Yes. The purchased PDF of JJF 1154-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version JJF 1154-2014?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JJF 1154-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.