|
US$469.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 9485-2023: Radial turbochargers - Connection dimensions
Status: Valid GB/T 9485: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 9485-2023 | English | 469 |
Add to Cart
|
4 days [Need to translate]
|
Radial turbochargers - Connection dimensions
| Valid |
GB/T 9485-2023
|
| GB/T 9485-2003 | English | 439 |
Add to Cart
|
3 days [Need to translate]
|
Radial turbochargers -- Connection dimensions
| Obsolete |
GB/T 9485-2003
|
| GB/T 9485-1988 | English | 479 |
Add to Cart
|
4 days [Need to translate]
|
Radial turbocharger--Connection dimensions
| Obsolete |
GB/T 9485-1988
|
PDF similar to GB/T 9485-2023
Basic data | Standard ID | GB/T 9485-2023 (GB/T9485-2023) | | Description (Translated English) | Radial turbochargers - Connection dimensions | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J91 | | Classification of International Standard | 27.020 | | Word Count Estimation | 23,215 | | Date of Issue | 2023-11-27 | | Date of Implementation | 2024-06-01 | | Older Standard (superseded by this standard) | GB/T 9485-2003 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 9485-2023: Radial turbochargers - Connection dimensions---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 27:020
CCSJ91
National Standards of People's Republic of China
Replace GB/T 9485-2003
Radial turbocharger connection dimensions
Published on 2023-11-27
2024-06-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
PrefaceⅠ
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Technical requirements 1
4:1 Mutual position dimensions of superchargers 1
4:2 Gas inlet and outlet connection dimensions 4
Foreword
This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents"
Drafting:
This document replaces GB/T 9485-2003 "Radial Turbocharger Connection Dimensions": Compared with GB/T 9485-2003, except for the
In addition to structural adjustments and editorial changes, the main technical changes are as follows:
a) Changed the scope (see Chapter 1, Chapter 1 of the:2003 edition);
b) The mutual position dimensional standards and requirements of some superchargers have been changed (see 4:1, 2:1 of the:2003 edition);
c) Added relevant requirements for superchargers with compressor impeller outlet diameters of 40mm~60mm (see Table 1~Table 6);
d) Changed the connection size of the supercharger gas inlet and outlet with a compressor impeller outlet diameter of 60mm~140mm (see Table 2~
Table 5, Table 2~Table 5 of the:2003 edition);
e) The compressor inlet clamp connection and connection dimensions are added (see Figure 6 and Table 2);
f) Added compressor outlet plug-in connection, clamp connection and connection dimensions (see Figure 11, Figure 12 and Table 3);
g) The turbine inlet three-hole single inlet flange connection and connection dimensions are added (see Figure 18 and Table 4);
h) The connection dimensions of the four-hole square single inlet and double inlet of the turbine inlet have been changed (see Figure 20, Figure 21 and Table 4,:2003 version
Figure 14 and Table 4);
i) The irregular-shaped flange connection and connection dimensions of the turbine outlet have been added (see Figure 34 and Table 6):
Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents:
This document is proposed by China Machinery Industry Federation:
This document is under the jurisdiction of the National Internal Combustion Engine Standardization Technical Committee (SAC/TC177):
This document was drafted by: Hunan Tianyan Machinery Co:, Ltd:, Shanghai Motor Vehicle Inspection and Certification Technology Research Center Co:, Ltd:, FAW
Jiefang Automobile Co:, Ltd: Wuxi Diesel Engine Factory, Taizhou Weidelong Machinery Co:, Ltd:, Linhai Yongheng Auto Parts Technology Co:, Ltd:, Zhejiang Julong
Automation Equipment Co:, Ltd:, Datong Northern Tianli Booster Technology Co:, Ltd:, Weifang University of Science and Technology:
The main drafters of this document: Hu Liaoping, Liu Huijun, Ji Weibin, Guo Hua, Wang Yijiang, Chen Weihua, Liu Lin, Cao Gang, Han Guoqiang, Dai Hua, Wang Guanghui,
Chen Zhaoming, Li Yanzhao, Chen Cuiwen, Liu Jianyong, Zhu Aiguo:
This document was first published in 1988, revised for the first time in:2003, and this is the second revision:
Radial turbocharger connection dimensions
1 Scope
This document specifies the connection dimensions of radial flow turbochargers (hereinafter referred to as "superchargers"):
This document is applicable to superchargers with a compressor impeller outlet diameter of 40mm~200mm, except for special-purpose superchargers:
2 Normative reference documents
This document has no normative references:
3 Terms and definitions
There are no terms or definitions to be defined in this document:
4 Technical requirements
4:1 Mutual position dimensions of superchargers
The mutual position dimensions of the superchargers (as shown in Figure 1) should comply with the requirements of Table 1:
a) Front view b) Side view
Index symbol description:
J ---The size from the outlet center of the compressor casing to the center of the rotor; K ---The size from the outlet end of the compressor casing to the center of the rotor;
L --- Dimension from turbine shell inlet flange hole center to rotor center; H --- Dimension from turbine shell inlet flange surface to rotor center;
R --- the size from the outlet center of the compressor casing to the center of the turbine casing inlet flange hole; S --- the size from the inlet end of the compressor casing to the center of the turbine casing inlet flange hole;
T---dimension from the outlet end surface of the turbine shell to the center of the turbine shell inlet flange hole:
The structure may be different from that shown in the figure, but the specified dimensions should be followed:
Figure 1 Mutual position dimensions of superchargers
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 9485-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 9485-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 9485-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 9485-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 9485-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9485-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|