HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (12 Oct 2025)

GB/T 8243.6-2025 PDF English

US$215.00 · In stock · Download in 9 seconds
GB/T 8243.6-2025: Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

GB/T 8243.6: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
GB/T 8243.6-2025English215 Add to Cart 0-9 seconds. Auto-delivery Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test Valid
GB/T 8243.6-2017English90 Add to Cart 0-9 seconds. Auto-delivery Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 6: Static burst pressure test Valid
GB/T 8243.6-2006English239 Add to Cart 3 days Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 6: Static burst pressure test Obsolete

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: GB/T 8243.6-2025
      

Similar standards

GB/T 14097   GB/T 23341.1   GB/T 20064.1   GB/T 8243.12   

GB/T 8243.6-2025: Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT8243.6-2025
GB NATIONAL STANDARD OF THE PEOPLE'S REPUBLIC OF CHINA ICS 27.020 CCS J 91 GB/T 8243.6-2025 / ISO 4548-6.2021 Replacing GB/T 8243.6-2017 Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6.Static burst pressure test (ISO 4548-6.2021, IDT) Issued on: JUNE 30, 2025 Implemented on: JANUARY 1, 2026 Issued by. State Administration for Market Regulation; Standardization Administration of PRC.

Table of Contents

Foreword... 3 Introduction... 5 1 Scope... 7 2 Normative references... 7 3 Terms and definitions... 7 4 Test bench... 7 5 Test fluid... 8 6 Test preparation and test procedures... 8 6.1 Verification that filters meet technical requirements... 8 6.2 Determination of filter failure pressure... 9 7 Test result report... 10 References... 11

Foreword

This document is drafted in accordance with the provisions of GB/T 1.1-2020 Directives for standardization - Part 1.Rules for the structure and drafting of standardizing documents. This document is Part 6 of GB/T 8243 Methods of test for full-flow lubricating oil filters for internal combustion engines. GB/T 8243 has been published in the following parts. -- Part 1.Differential pressure/flow characteristics; -- Part 2.Element by-pass valve characteristics; -- Part 3.Resistance to high differential pressure and to elevated temperature; -- Part 4.Initial particle retention efficiency, life and cumulative efficiency (gravimetric method); -- Part 5.Test for cold start simulation and hydraulic pulse durability; -- Part 6.Static burst pressure test; -- Part 7.Vibration fatigue test; -- Part 9.Inlet and outlet anti-drain valve tests; -- Part 12.Filtration efficiency using particle counting and contaminant retention capacity; -- Part 13.Static burst pressure test for composite filter housings; -- Part 14.Cold start simulation and hydraulic pulse durability for composite filter housings; -- Part 15.Vibration fatigue test for composite filter housings. This document replaces GB/T 8243.6-2017 Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6.Static burst pressure test. Compared with GB/T 8243.6-2017, in addition to structural adjustments and editorial changes, the main technical changes are as follows. a) The provision that other lubricating oil temperatures may be used in the test fluid has been added (see Chapter 5); b) The provisions on tightening rotation angle have been added [see 6.1.1, 6.1.8, 6.1.9, and f) and h) in Chapter 7]; Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6.Static burst pressure test

1 Scope

This document specifies the test method for determining the capacity of static burst pressure target value of full-flow lubricating oil filters for internal combustion engines, determining the magnitude of the static burst pressure and determining the failure mode. This document is not applicable to aviation filters and plastic filters.

2 Normative references

The provisions of the following documents constitute the essential clauses of this document through normative references in this text. Among them, for referenced documents with dates, only the versions corresponding to the dates are applicable to this document; for referenced documents without dates, the latest versions (including all amendments) are applicable to this document. ISO 4548-1 Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 1.Differential pressure/flow characteristics NOTE. GB/T 8243.1-2003 Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 1.Differential pressure/flow characteristics (ISO 4548-1.1997, IDT)

3 Terms and definitions

For this document, the terms and definitions defined in ISO 4548-1 apply.

4 Test bench

The circuit diagram of the typical hydraulic test bench used in this document is shown in Figure 1. The test bench shall include a manual hydraulic pump or other suitable technical device, high-pressure oil pipes, valves, a pressure gauge with a range of 0 kPa~3000 kPa or higher, and a transparent protective cover.

5 Test fluid

The lubricating oil with an ISO viscosity grade of 22 and a viscosity index (VI) of 96 at ambient temperature (or SAE 5 W lubricating oil) shall be used. Other lubricating oil temperatures may be used if agreed upon between the filter manufacturer and the customer.

6 Test preparation and test procedures

6.1 Verification that filters meet technical requirements 6.1.1 Install the filter according to the recommended tightening torque or rotation angle. If tolerances are specified, the minimum tightening torque or rotation angle shall be used. The connection between the filter and the connector shall be the same as the product installation condition. When multiple specimens are tested to obtain statistical average data, the mean and standard deviation should be calculated and reported. When more than seven specimens are tested, the static burst pressure estimated at a 95% confidence level can be calculated using Weibull analysis and reported. NOTE. For Weibull analysis and assessment of static burst pressure at 95% confidence level, see ISO 19973-1.

7 Test result report

The test report shall at least include the following contents. a) The number of this document, i.e. GB/T 8243.6-2025; b) Laboratory name; c) Filter type (manufacturer model and batch number); d) Test date; e) Filter description. new or used (if the latter, the approximate usage time shall be indicated); f) Initial tightening torque or rotation angle (see 6.1.1); g) The target pressure value specified by the customer and whether it is achieved (see 6.1.7); h) Residual tightening torque or rotation angle (see 6.1.8); i) Visible permanent deformation (see 6.1.8); j) Burst pressure (see 6.2.1); k) Failure mode and failure location. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of GB/T 8243.6-2025 be delivered?

Answer: The full copy PDF of English version of GB/T 8243.6-2025 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 8243.6-2025_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 8243.6-2025_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- GB/T 8243.6-2025 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version GB/T 8243.6-2025?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 8243.6-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of GB/T 8243.6-2025?

A step-by-step guide to download PDF of GB/T 8243.6-2025_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 8243.6-2025".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9