Powered by Google www.ChineseStandard.net Database: 189760 (20 Jul 2024)

GB/T 36765-2018 related PDF English

GB/T 36765-2018 (GB/T36765-2018, GBT 36765-2018, GBT36765-2018) & related versions
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)See DetailStatusSimilar PDF
GB/T 36765-2018English150 Add to Cart 0-9 seconds. Auto delivery. 1, 1, 1, 2-Tetrafluoroethane for automobile air-conditioning use (aerosol product) GB/T 36765-2018 Valid GBT 36765-2018
Buy with any currencies (Euro, JPY, KRW...): GB/T 36765-2018    Preview this PDF: GB/T 36765-2018



GB/T 36765-2018: PDF in English (GBT 36765-2018)
GB/T 36765-2018
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 71.080.20
G 17
1,1,1,2-Tetrafluoroethane for automobile
air-conditioning use (aerosol product)
ISSUED ON. SEPTEMBER 17, 2018
IMPLEMENTED ON. JANUARY 01, 2019
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative references ... 4 
3 Terms and definitions ... 5 
4 Technical requirements ... 5 
5 Test methods ... 6 
6 Inspection rules ... 7 
7 Marks, packaging, transport and storage ... 8 
8 Safety ... 10 
1,1,1,2-Tetrafluoroethane for automobile
air-conditioning use (aerosol product)
1 Scope
This Standard specifies the terms and definitions, technical requirements, test
methods, inspection rules, marks, packaging, transport, storage and safety of
1,1,1,2-Tetrafluoroethane for automobile air-conditioning use (aerosol product).
This Standard is applicable to automobile air conditioning refrigerant that uses
1,1,1,2-tetrafluoroethane as raw material, packaged in aerosol can (less than
1L) produced by the filling process.
This Standard is not applicable to reusable aerosol can type products.
Chemical name. 1,1,1,2-tetrafluoroethane
Molecular formula. C2H2F4
Relative molecular mass. 102.03 (according to the international relative atomic
mass in 2013)
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
GB 190, Packing symbol of dangerous goods
GB/T 191, Packaging and storage marks
GB/T 2828.1, Sampling procedures for inspection by attributes - Part 1.
Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot
inspection
GB/T 8170, Rules of rounding off for numerical values & expression and
judgement of limiting values
GB/T 13042, Packaging Containers – Tinplate Aerosol Can
a) when key production process updated, mainly changes on main raw
material;
b) production resumed after production discontinued;
c) major mass accident occurred;
d) significant difference between previous type inspection;
e) when quality supervision agency required by law;
f) when user has special requirements.
6.3.2.3 Randomly extract and mix 2 samples from the factory inspection items
to ensure that each sample contains 1,1,1,2-tetrafluoroethane not less than
1000 g. One sample is used as a sample for 4.4 refrigerant quality inspection,
and the other is used as a backup sample.
6.4 Rules for determination
6.4.1 As technical requirements 4.1~4.3, if the inspection indicator of the tested
sample is unqualified, it shall be re-examined twice from the same batch of
products for re-inspection. The re-inspection results shall prevail. If the retest
result is still exceeding the quality limit, the batch is determined as unqualified.
6.4.2 Technical requirements 4.4 refrigerant quality inspection items shall be
carried out according to the comparison method of the repair value in GB/T
8170. If the test results do not meet the requirements of this Standard, it shall
be re-extracted twice from the same batch of products for re-inspection. The
result of re-inspection is that even if only one indicator does not meet the
requirements of this Standard, the whole batch of products shall be unqualified.
6.4.3 The determination rules for exit-factory inspection and type inspection
shall be the same.
7 Marks, packaging, transport and storage
7.1 Marks
7.1.1 The packaging container of 1,1,1,2-tetrafluoroethane for automobile air-
conditioning use (aerosol product) shall have firm and clear mark, indicating the
following information.
a) product name and trademark;
b) manufacturer name and address;
c) net content;
......

BASIC DATA
Standard ID GB/T 36765-2018 (GB/T36765-2018)
Description (Translated English) 1, 1, 1, 2-Tetrafluoroethane for automobile air-conditioning use (aerosol product)
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard G17
Classification of International Standard 71.080.20
Word Count Estimation 10,178
Date of Issue 2018-09-17
Date of Implementation 2019-01-01
Drafting Organization Zhejiang Luzhou Lianzhou Refrigerant Co., Ltd., Jiangsu Blue Planet Environmental Technology Co., Ltd., Zhejiang Sanmei Chemical Co., Ltd., Sinochem Modern Environmental Chemicals (Xi'an) Co., Ltd., Guangzhou Biaobang Auto Supplies Industry Co., Ltd., China Standardization Association Auto Supplies Professional Committee, Shandong Dongyue Chemical Co., Ltd., Pujiang Binghe Chemical Co., Ltd., Shaoguan Laiya Chemical Technology Co., Ltd., Jiangxi Chepu Industrial Co., Ltd.
Administrative Organization National Chemical Standardization Technical Committee Refrigerant Subcommittee (SAC/TC 63/SC 9)
Proposing organization China Petroleum and Chemical Industry Federation
Issuing agency(ies) State Administration of Markets and China National Standardization Administration