HOME Cart(0) Quotation About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (25 Oct 2025)

GB/T 30329.5-2019 English PDF

US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30329.5-2019: Graphic technology -- Colour and transparency of printing ink sets for four-colour printing -- Part 5: Flexographic printing
Status: Valid

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
GB/T 30329.5-2019	English	259	Add to Cart	3 days [Need to translate]	Graphic technology -- Colour and transparency of printing ink sets for four-colour printing -- Part 5: Flexographic printing	Valid	GB/T 30329.5-2019

PDF similar to GB/T 30329.5-2019

Standard similar to GB/T 30329.5-2019

WB/T 1120 GB/T 36088 GB/T 26992 GB/T 30324 GB/T 30325 GB/T 30329.1

Basic data

Standard ID	GB/T 30329.5-2019 (GB/T30329.5-2019)
Description (Translated English)	Graphic technology -- Colour and transparency of printing ink sets for four-colour printing -- Part 5: Flexographic printing
Sector / Industry	National Standard (Recommended)
Classification of Chinese Standard	A17
Classification of International Standard	37.100.01
Word Count Estimation	13,122
Date of Issue	2019-12-31
Date of Implementation	2020-07-01
Issuing agency(ies)	State Administration for Market Regulation, China National Standardization Administration

GB/T 30329.5-2019: Graphic technology -- Colour and transparency of printing ink sets for four-colour printing -- Part 5: Flexographic printing

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Graphic technology.Colour and transparency of printing ink sets for four-colour printing-Part 5. Flexographic printing ICS 37.100.01 A17 National Standards of People's Republic of China Printing technology four-color printing ink color and transparency Part 5. Flexographic printing 2019-12-31 release 2020-07-01 implementation State Administration of Market Supervision Published by the National Standardization Administration

Foreword III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 Requirement 2 4.1 Overview 2 4.2 Chroma value 2 4.3 Transparency characteristics 2 5 Test method 3 5.1 Principle 3 5.2 Preparation of test prints 3 5.3 Color Measurement Step 4 Appendix A (Normative Appendix) Reference Substrate 5 Appendix B (informative) Specific description of test methods and proofs 6 Appendix C (informative) Example of sample preparation equipment and technical conditions 8 Reference 9

Foreword

GB/T 30329 "Color and transparency of printing inks for four-color printing technology" includes the following 5 parts. --- Part 1. Sheetfed and thermoset web offset printing; --- Part 2. Cold-set offset printing; --- Part 3. Publication gravure printing; --- Part 4. screen printing; --- Part 5. Flexographic printing. This part is Part 5 of GB/T 30329. This section is drafted in accordance with the rules given in GB/T 1.1-2009. Please note that some elements of this document may involve patents. The issuer of this document is not responsible for identifying these patents. This section is proposed by the National Press and Publication Administration. This section is under the jurisdiction of the National Printing Standardization Technical Committee (SAC/TC170). This section was drafted. Xiamen Hexing Packaging and Printing Co., Ltd., Shanghai Institute of Printing Technology, Hanghua Ink Co., Ltd., National Paper Product Quality Supervision and Inspection Center, Shanghai Yingyao Laser Digital Plate Making Co., Ltd., Shanghai Ziquan Label Co., Ltd., Shandong Dechuang Jing Technology Co., Ltd., Shaanxi New Century Printing Materials Co., Ltd., Shanghai Tobacco Packaging and Printing Co., Ltd., and Guangdong Yingke Group Co., Ltd. Company, Shanghai Publishing and Printing College, China Printing Technology Association. The main drafters of this section. Peng Xinbin, Xue Xianhua, Zhang Jinxia, Chen Chunxia, Liu Tie, Dong Tianbo, Wang Xuechun, Zhu Haibo, Qian Yan, Liu Runlin, Kong Lingjun and Gong Renxuan.

Introduction

The purpose of this part of GB/T 30329 is to define the chromaticity and transparency characteristics of standard four-color inks for flexographic printing. The result is Obtained under the reference substrate and test conditions specified in this section. Standardized ink enables flexographic printing under the same printing conditions Get similar color effect. The color standards specified in this part of GB/T 30329 can improve the production of flexographic inks and printing separations. For evidence. This part of GB/T 30329 has collected 13 kinds of paper patterns and 5 kinds of four-color solvents commonly used in flexographic printing on the domestic market based on national conditions. Agent ink and five kinds of four-color water-based ink samples, the national paper product quality supervision and inspection center was commissioned to carry out the corresponding technical parameter test. Getting After obtaining a sufficient amount of measured data, using the principle of mathematical statistics, the technical indicators for the reference substrate used in this part of the test were screened. in On this basis, the technical indicators of color and transparency of four-color solvent inks and water-based inks were determined. Printing technology four-color printing ink color and transparency Part 5. Flexographic printing

1 Scope

This part of GB/T 30329 specifies the colors and requirements for a set of primary inks (including additives) for four-color flexographic printing. Transparency characteristics, while also prescriptive test methods. In order to avoid restricting the development of optimized combinations of different pigments, this section does not specify pigments (or spectral characteristics), but it should meet the Fixed chromaticity requirements. This section applies to flexographic printing using solvent inks and water-based inks.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 451.2 Determination of quantitative paper and paperboard GB/T 8941 Determination of mirror gloss of paper and cardboard GB/T 19437 Printing technology Spectral measurement and colorimetric calculation of printed images

3 terms and definitions

The following terms and definitions apply to this document. 3.1 Diluent extender A transparent or translucent material added to the ink to reduce the concentration of the colorant without significantly affecting the rheology of the ink. 3.2 Press-readyin Ink with all the necessary ingredients and suitable viscosity on the press. 3.3 Transparency The ability of the ink to penetrate the light and reveal the color of the covered surface. Note. It is usually expressed by measuring the amount of excess scattered light. 3.4 Solvent-basedink Ink using organic solvents as the main solvent. [GB/T 15962-2018, definition 2.32] 3.5 Water-basedink Ink composed of water-based binder and other components. [GB/T 15962-2018, definition 2.33]

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 30329.5-2019_English be delivered?

Answer: Upon your order, we will start to translate GB/T 30329.5-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 30329.5-2019_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 30329.5-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.