|
US$1254.00 ยท In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 29165.1-2022: Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials
Status: Valid GB/T 29165.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 29165.1-2022 | English | 1254 |
Add to Cart
|
8 days [Need to translate]
|
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials
| Valid |
GB/T 29165.1-2022
|
| GB/T 29165.1-2012 | English | 999 |
Add to Cart
|
5 days [Need to translate]
|
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 1: Vocabulary, symbols, applications and materials
| Obsolete |
GB/T 29165.1-2012
|
PDF similar to GB/T 29165.1-2022
Basic data | Standard ID | GB/T 29165.1-2022 (GB/T29165.1-2022) | | Description (Translated English) | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | E97 | | Classification of International Standard | 75.200; 83.140.30 | | Word Count Estimation | 62,60 | | Date of Issue | 2022-12-30 | | Date of Implementation | 2023-04-01 | | Older Standard (superseded by this standard) | GB/T 29165.1-2012 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 29165.1-2022: Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 75.200;83.140.30
CCSE97;G33
National Standards of People's Republic of China
Replace GB/T 29165.1-2012
Fiberglass reinforced plastic pipes for the oil and gas industry
Part 1.Vocabulary, symbols, applications and materials
(ISO 14692-1.2017, IDT)
Posted on 2022-12-30
2023-04-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
table of contents
Preface I
Introduction II
1 Scope 1
2 Normative references 2
3 Terms, Definitions, Symbols and Abbreviations 2
3.1 General terms 2
3.2 Technical terms 3
3.3 Symbols and abbreviations 15
4 pressure class 19
4.1 MPRxx 19
4.2 Partial coefficient 21
5 categories 21
5.1 Connector 21
5.2 Resin matrix 22
6 Material 23
7 size 23
Appendix A (Informative) Principle 25
Appendix B (informative) Guidance on scope limitations 30
Appendix C (Normative) Information Sheet 31
Appendix D (Normative) Wall Thickness Definition 34
Appendix E (informative) Selection of sub-item coefficients (f3, est) in the bidding process 35
Appendix F (informative) Example 40
Reference 56
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents"
drafting.
This document is the first part of GB/T 29165 "Glass Fiber Reinforced Plastic Pipes for Oil and Gas Industry". GB/T 29165 has
The following parts were released.
--- Part 1.Vocabulary, symbols, applications and materials;
--- Part 2.Evaluation and manufacture;
--- Part 3.System Design;
--- Part 4.Assembly, installation and operation.
This document replaces GB/T 29165.1-2012 "Glass fiber reinforced plastic pipes for oil and gas industry - Part 1.Vocabulary, symbols
Compared with GB/T 29165.1-2012, except for structural adjustment and editorial changes, the main technical changes are as follows.
a) The scope of application of the document has been changed, and the pressure assessment method and classification of products have been added (see Chapter 1, Chapter 1 of the.2012 edition);
b) The scope of application of this document has been added, such as piping used in pump caissons, silencers, I-beams, seawater risers and other similar items
(see Chapter 1);
c) Added typical applications of GRP pipelines in the oil and gas industry (see Chapter 1);
d) Added 23 terms such as "outer arc side", deleted 22 terms such as "component variable", and changed 24 terms such as "accelerator"
Definition of (see Chapter 3, Chapter 3 of the.2012 edition);
e) Some symbols and abbreviations have been added (see Chapter 3);
f) Deleted some symbols and abbreviations (see Chapter 3 of the.2012 edition);
g) Added pressure terms, terms of load sub-items and related requirements (see Chapter 4);
h) Added the classification of joints and resin matrix (see Chapter 5);
i) The material requirements for component walls are added, and the requirements for external coatings are added (see Chapter 6);
j) Typical maximum pressure-diameter ranges for piping in fluid services (e.g. water/hydrocarbon services) covered by this document have been added
(see Chapter 7);
k) Added inquiry form (see Appendix C);
l) The definition of wall thickness has been added (see Appendix D).
This document is equivalent to ISO 14692-1.2017 "Glass fiber reinforced plastic pipes for the oil and gas industry - Part 1.Vocabulary, symbols
Numbers, Applications and Materials".
Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed and managed by the National Petroleum and Natural Gas Standardization Technical Committee (SAC/TC355).
This document is drafted by. China Petroleum Engineering Materials Research Institute Co., Ltd., China National Petroleum Corporation Tarim Oil
Tian Branch, PetroChina Xinjiang Oilfield Branch, PetroChina Changqing Oilfield Branch
Division, Harbin University of Science and Technology, Fujisi (Qingdao) Composite Pipeline Co., Ltd., Xinjiang Petroleum Pipeline Engineering Co., Ltd., Xi'an Sanhuanshi
Oil Pipe Technology Co., Ltd., Beijing Longsheng Taike Oil Pipe Technology Co., Ltd.
The main drafters of this document. Xu Ting, Zhang Hua, Qi Dongtao, Li Houbu, Wang Yanfu, Zhao Yan, Ding Han, Fang Wei, Yang Yang, Wei Jun, Yang Chunlin,
Li Yajun, Luo Jinheng, Chen Xinyi, Wu Chao, Xue Jian, Yan Zifeng, Yan Changjie, Chen Xian, Shao Kela, Zhu Wenfeng, Xiong Qingren, Li Ru, Lu Hua.
This document was first published in.2012, and this is the first revision.
Introduction
Glass fiber reinforced plastic pipe is a composite material with glass fiber reinforced unsaturated polyester, epoxy resin and phenolic resin as matrix materials.
Plastic pipes are widely used in the oil and gas industry. In order to standardize the design, manufacture, evaluation and operation of glass fiber reinforced plastic pipes
A series of technical documents for glass fiber reinforced plastic pipes in the oil and gas industry have been formulated. GB/T 29165 "Oil and Natural Gas Industry Glass
"Glass Fiber Reinforced Plastic Pipe" aims to provide the oil and gas industry with the basic terminology, materials, evaluation of glass fiber reinforced plastic pipes recognized by all parties.
Standards for determination, manufacture, design, assembly, installation and operation. According to the characteristics of each stage of the full service cycle of glass fiber reinforced plastic pipes, if
Application and materials, evaluation and manufacture, system design, assembly, installation and operation are composed of four parts.
--- Part 1.Vocabulary, symbols, applications and materials. The purpose is to provide information on basic terminology and notation for the remaining three sections, and to
Applications and materials are specified and required.
--- Part 2.Evaluation and manufacture. The purpose is to guide the system design, assembly of glass fiber reinforced plastics (GRP), and to provide
Quality requirements for assessing and manufacturing products.
--- Part 3.System Design. The aim is to provide a system design for the entire glass fiber reinforced plastic (GRP) piping system piping.
--- Part 4.Assembly, installation and operation. The purpose is to provide construction parties and users of glass fiber reinforced plastic (GRP) systems
refer to.
Compared with traditional metal materials and other non-metal material pipes, glass fiber reinforced plastic pipes have high strength, good performance, and product design
The degree of freedom is large, and the product has a wide range of applications. This document combines the specific use of glass fiber reinforced plastic pipes in the petroleum industry.
According to the characteristics of each stage of its full service cycle, it can guide all parties including the designer, manufacturer, construction party and user to provide glass
The application of fiber-reinforced plastic pipes in the oil and gas industry provides a complete system solution to ensure the safety of products in the oil and gas industry
Safe to use.
The process of using GB/T 29165/ISO 14692 (all parts) is shown in Figure 1.
Figure 1 Flow chart of using GB/T 29165/ISO 14692 (all parts)
Fiberglass reinforced plastic pipes for the oil and gas industry
Part 1.Vocabulary, symbols, applications and materials
1 Scope
This document specifies the product specifications according to the application method of the product, the type of joint and resin matrix, and the restrictions on the structure and size of the materials used.
Scope of application, pressure assessment method and classification. This document also specifies the terms, definitions and symbols, providing for other parts of GB/T 29165
guide.
GB/T 29165 (all parts) applies to glass fiber reinforced plastic (GRP) piping systems, the joints used in the system can prevent
The axial thrust caused by internal pressure, temperature change and fluid dynamics, the system design envelope is trapezoidal. GB/T 29165 (all parts) mainly
Suitable for offshore fixed and floating platforms, can also be used for other similar applications on land, such as produced water, fire fighting water systems and general industrial purposes
Specification, fabrication, testing and installation of GRP piping systems.
Since floating platforms allow the use of alternative codes and standards for GRP piping associated with ships and/or ballast systems, the
Refer to design, construction and certification standards for the hull or vessel in use. However, it is recommended to use GB/T 29165 (all parts) as much as possible.
GB/T 29165 (all parts) can also be used as a passage for pump caissons, silencers, I-beams, seawater risers and other similar structural pipes.
Use the base specification.
Typical applications of GRP pipelines in the oil and gas industry are shown in Table 1.
Table 1 Typical applications of GRP pipelines in the oil and gas industry
ballast water hydrochloric acid
boiler feed water inert gas
Seawater (Brine) Fuel
carbon dioxide natural gas
Wet Chlorine Petroleum
Condensate (water and gas) (acid) petroleum and associated gas
Cooling water, fresh water, brackish water, sea water drinking water
Demineralized Water Process Water
Diesel produced water
sewage sea water
Emulsion (oil-air-water mixture) Tap water
Water for fire fighting (circular main water pipe and wet or dry deluge system) Sewerage (gray sewage and red sewage)
Formation water sodium hydroxide
Sodium Chlorosulfite Purified Water
aviation fuel acid water
Natural gas (methane, etc.) oil-gas mixture
Glycol ventilation
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 29165.1-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 29165.1-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 29165.1-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 29165.1-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 29165.1-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 29165.1-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|