|
US$264.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 19314.4-2019: Small craft -- Hull construction and scantlings -- Part 4: Workshop and manufacturing
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 19314.4-2019 | English | 264 |
Add to Cart
|
3 days [Need to translate]
|
Small craft -- Hull construction and scantlings -- Part 4: Workshop and manufacturing
| Valid |
GB/T 19314.4-2019
|
PDF similar to GB/T 19314.4-2019
Basic data | Standard ID | GB/T 19314.4-2019 (GB/T19314.4-2019) | | Description (Translated English) | Small craft -- Hull construction and scantlings -- Part 4: Workshop and manufacturing | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | U18 | | Classification of International Standard | 47.080 | | Word Count Estimation | 14,196 | | Date of Issue | 2019-05-10 | | Date of Implementation | 2019-12-01 | | Quoted Standard | GB/T 19314.1-2003; GB/T 19314.3-2019; GB/T 19314.5-2019; ISO 8666-2002 | | Adopted Standard | ISO 12215-4-2002, IDT | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | | Summary | This standard specifies shop conditions, storage and processing of materials, and requirements for the manufacture of boats. This standard applies to boats with a hull length (LH) not greater than 24 m in accordance with ISO 8666. This standard does not address health and safety requirements. | GB/T 19314.4-2019: Small craft -- Hull construction and scantlings -- Part 4: Workshop and manufacturing
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Small craft--Hull construction and scantlings--Part 4. Workshop and manufacturing
ICS 47.080
U18
National Standards of People's Republic of China
Boat structure and component size
Part 4. Workshop and Manufacturing
Part 4. Workshopandmanufacturing
(ISO 12215-4.2002, IDT)
Published on.2019-05-10
2019-12-01 implementation
State market supervision and administration
China National Standardization Administration issued
Foreword
GB/T 19314 "Small boat hull structure and component size" is divided into 9 parts.
--- Part 1. Materials. thermosetting resins, glass fiber reinforced plastics, reference laminates;
--- Part 2. Materials. core materials for embedded structures, embedded materials;
--- Part 3. Materials. steel, aluminum alloy, wood, other materials;
--- Part 4. Workshop and manufacturing;
--- Part 5. Determination of design pressure, design stress and component size of single vessel;
--- Part 6. Structural arrangements and details;
--- Part 7. Determination of the dimensions of multi-hull ship components;
--- Part 8. Rudder;
--- Part 9. Sailboat possession.
This part is the fourth part of GB/T 19314.
This part is drafted in accordance with the rules given in GB/T 1.1-2009.
This part uses the translation method equivalent to ISO 12215-4.2002 "Small boat hull structure and component dimensions Part 4. Workshop and system
Made.
The documents of our country that have a consistent correspondence with the international documents referenced in this part are as follows.
---GB/T 19916-2005 Main data of small boats (ISO 8666.2002, IDT)
This part is proposed and managed by the National Small Boat Standardization Technical Committee (SAC/TC241).
This section drafted by. China Shipbuilding Corporation, the 7th Eighteenth Institute.
The main drafters of this section. Gong Yi, Li Jiangtao, Cui Haixin.
Boat structure and component size
Part 4. Workshop and Manufacturing
1 Scope
This part of GB/T 19314 specifies the conditions of the shop, the storage and processing of the materials, and the manufacturing requirements for the boat. This section applies to
A dinghy with a hull length (LH) of not more than 24 m in accordance with ISO 8666.
This section does not address health and safety requirements.
Note. The root cause of the preparation of this part of GB/T 19314 is that the workshop conditions have a significant impact on the short-term and long-term mechanical properties of the yacht, and according to GB/T 19314.5
The determined component dimensions are based on the appropriate materials and manufacturing conditions used.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 19314.1-2003 hull structure and component dimensions - Part 1. Materials. thermosetting resin, glass reinforced
Plastic, reference laminate (ISO 12215-1.2000, IDT)
GB/T 19314.3-2019 hull structure and component dimensions - Part 3. Materials. steel, aluminium alloy, timber, other materials
(ISO 12215-3.2002, IDT)
GB/T 19314.5-2019 hull structure and component dimensions - Part 5. singular design pressure, design stress,
Determination of dimensions (ISO 12215-5.2008, IDT)
ISO 8666.20021) Small boat main data (Smalcraft-Principaldata)
1) This document was not published at the time of ISO 12215-4.2002, and was published in.2002.
3 Production of fiber reinforced plastic (FRP) boats
3.1 Workshop conditions
3.1.1 General requirements
The workshop should be compatible with the production and storage conditions and meet the environment specified by the material manufacturer or supplier.
In order to minimize the contamination or damage of the laminate (stack), the production area should be separated from the storage area, and different systems should be used as much as possible.
The manufacturing process is carried out in an isolated interval.
The workshop and equipment should be properly maintained and kept clean, free of waste, residual materials and equipment not related to production.
3.1.2 Temperature and humidity
If the usual hand lay-up or injection molding process is used, the temperature of the molding shop should be kept in resin during the laying and curing.
Within the limits specified by the manufacturer.
If the temperature change is outside the specified limits, the dinghy manufacturer should work with the resin manufacturer to verify that the laminate (layer) will be made
Can meet the requirements of component size and design.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 19314.4-2019_English be delivered?Answer: Upon your order, we will start to translate GB/T 19314.4-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 19314.4-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 19314.4-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|