HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 19314.3-2019 English PDF

US$264.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 19314.3-2019: Small craft -- Hull construction and scantlings -- Part 3: Materials: Steel, aluminium alloys, wood, other materials
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 19314.3-2019English264 Add to Cart 3 days [Need to translate] Small craft -- Hull construction and scantlings -- Part 3: Materials: Steel, aluminium alloys, wood, other materials Valid GB/T 19314.3-2019

PDF similar to GB/T 19314.3-2019


Standard similar to GB/T 19314.3-2019

JT/T 258   GB/T 37348   GB/T 37335   GB/T 19314.10   GB/T 19314.4   GB/T 19314.5   

Basic data

Standard ID GB/T 19314.3-2019 (GB/T19314.3-2019)
Description (Translated English) Small craft -- Hull construction and scantlings -- Part 3: Materials: Steel, aluminium alloys, wood, other materials
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard U18
Classification of International Standard 47.080
Word Count Estimation 14,192
Date of Issue 2019-05-10
Date of Implementation 2019-12-01
Quoted Standard GB/T 19314.1-2003; GB/T 19314.4-2019; ISO 8666-2002
Adopted Standard ISO 12215-3-2002, IDT
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration
Summary This standard applies to materials intended for the manufacture of boat hulls, superstructures and appendages, in particular: - weldable hot-rolled steel plates, wide flats, sections and bars of normal and higher strength; - austenitic Stainless steel sheets and profiles; - solid wood, plywood or veneer lumber; - other applicable materials. This standard applies to small boats with a hull length of not more than 24m in accordance with ISO 8666.

GB/T 19314.3-2019: Small craft -- Hull construction and scantlings -- Part 3: Materials: Steel, aluminium alloys, wood, other materials


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Small craft--Hull construction and scantlings--Part 3. Materials. Steel, aluminium alloys, wood, other materials ICS 47.080 U18 National Standards of People's Republic of China Boat structure and component size Part 3. Materials. steel, aluminum alloy, wood, other materials Part 3.Materials.Steel, aluminiumaloys,wood,othermaterials (ISO 12215-3.2002, IDT) Published on.2019-05-10 2019-12-01 implementation State market supervision and administration China National Standardization Administration issued

Foreword

GB/T 19314 "Small boat hull structure and component size" is divided into 9 parts. --- Part 1. Materials. thermosetting resins, glass fiber reinforced plastics, reference laminates; --- Part 2. Materials. core materials for embedded structures, embedded materials; --- Part 3. Materials. steel, aluminum alloy, wood, other materials; --- Part 4. Workshop and manufacturing; --- Part 5. Determination of design pressure, design stress and component size of single vessel; --- Part 6. Structural arrangements and details; --- Part 7. Determination of the dimensions of multi-hull ship components; --- Part 8. Rudder; --- Part 9. Sailboat possession. This part is the third part of GB/T 19314. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part uses the translation method equivalent to ISO 12215-3.2002 "Small boat hull structure and component dimensions Part 3. Materials. steel, Aluminum alloy, wood, other materials. The documents of our country that have a consistent correspondence with the international documents referenced in this part are as follows. ---GB/T 19916-2005 Main data of small boats (ISO 8666.2002, IDT) This part is proposed and managed by the National Small Boat Standardization Technical Committee (SAC/TC241). This section drafted by. China Shipbuilding Corporation, the 7th Eighteenth Institute. The main drafters of this section. Xu Zhiting, Gong Yu, Li Jiangtao. Boat structure and component size Part 3. Materials. steel, aluminum alloy, wood, other materials

1 Scope

This part of GB/T 19314 applies to materials intended for the manufacture of hulls, superstructures and attachments, in particular. --- Weldable normal-strength and higher-strength hot-rolled steel sheets, wide flat steels, profiles and bars; --- Austenitic stainless steel sheets and profiles; ---Forged aluminum alloy sheets, profiles or extruded profiles; --- Solid wood, plywood or veneer wood; --- Other applicable materials. Note 1. Other materials may be used in the manufacture of dinghy if it is proven to have sufficient applicability and durability for the intended use. This section applies to small boats with a hull length (LH) of not more than 24 m in accordance with ISO 8666. Note 2. The rationale for the preparation of this part of GB/T 19314 is the short-term and long-term durability of the choice of materials in the manufacture of boats for expected loads and environmental conditions. Sex has a major impact.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 19314.1-2003 hull structure and component dimensions - Part 1. Materials. thermosetting resin, glass reinforced Plastic, reference laminate (ISO 12215-1.2000, IDT) GB/T 19314.4-2019 hull structure and component dimensions - Part 4. Workshop and manufacturing (ISO 12215-4.2002, IDT) ISO 8666.20021) Small boat main data (Smalcraft-Principaldata) 1) This document was not published at the time of ISO 12215-2.2002, and was published in.2002.

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 Durability The natural intrinsic properties of wood indicate the use of the core material in the open atmosphere without any protection. Note. The classification of wood durability is listed in Table 1. 3.2 Veneer veneer Solid wood with a thickness of not more than 5mm in the finished state.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 19314.3-2019_English be delivered?

Answer: Upon your order, we will start to translate GB/T 19314.3-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 19314.3-2019_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 19314.3-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.