|
US$254.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17255.3-2009: Prosthetics and orthotics -- Classification and description of prosthetic components -- Part 3: Description of upper-limb prosthetic components
Status: Valid GB/T 17255.3: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 17255.3-2009 | English | 254 |
Add to Cart
|
3 days [Need to translate]
|
Prosthetics and orthotics -- Classification and description of prosthetic components -- Part 3: Description of upper-limb prosthetic components
| Valid |
GB/T 17255.3-2009
|
| GB/T 17255.3-1998 | English | 559 |
Add to Cart
|
3 days [Need to translate]
|
Prosthetics and orthotics--Classification and description of prosthetic components--Part 3: Description of upper-limb prosthetic components
| Obsolete |
GB/T 17255.3-1998
|
PDF similar to GB/T 17255.3-2009
Basic data | Standard ID | GB/T 17255.3-2009 (GB/T17255.3-2009) | | Description (Translated English) | Prosthetics and orthotics -- Classification and description of prosthetic components -- Part 3: Description of upper-limb prosthetic components | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | C45 | | Classification of International Standard | 11.040.40 | | Word Count Estimation | 13,141 | | Date of Issue | 2009-09-30 | | Date of Implementation | 2009-12-01 | | Older Standard (superseded by this standard) | GB/T 17255.3-1998 | | Quoted Standard | GB/T 14191.1; GB/T 17255.1; ISO 8549-2-1989 | | Adopted Standard | ISO 13405-3-1996, IDT | | Regulation (derived from) | National Standard Approval Announcement 2009 No.10 (Total No.150) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the method of describing upper limb prosthetic components. | GB/T 17255.3-2009: Prosthetics and orthotics -- Classification and description of prosthetic components -- Part 3: Description of upper-limb prosthetic components
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
. Prosthetics and orthotics Classification and description of prosthetic components Part 3. Description of upper-limb prosthetic components
ICS 11.040.40
C45
National Standards of People's Republic of China
GB/T 17255.3-2009/ISO 13405-3.1996
Replacing GB/T 17255.3-1998
Prosthetics and orthotics - Classification and description of prosthetic components
Part 3. Description of upper limb prosthetic components
(ISO 13405-3.1996, IDT)
Posted 2009-09-30
2009-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
Introduction Ⅳ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 Category 1
5 engaging member 1
6 Features 3
Seven pairs of wire member 7
8 structural member (prosthesis structure) 8
9 decorative member 8
GB/T 17255.3-2009/ISO 13405-3.1996
Foreword
GB/T 17255 "Prosthetics and orthotics - Classification and description of prosthetic components" is divided into three parts.
--- Part 1. Classification of prosthetic components;
--- Part 2. Description of lower limb prosthetic components;
--- Part 3. Description of upper limb prosthetic components.
This section GB/T 17255 Part 3.
This section identical with ISO 13405-3.1996 "Prosthetics and orthotics - Classification and description of prosthetic components Part 3. upper limb prostheses
Description member "(in English).
For ease of use, this section made the following editorial changes.
a) Remove the preface to the international standards;
b) "this International Standard" by "this section."
This Part replaces GB/T 17255.3-1998 "Prosthetics and orthotics - Classification and description of prosthetic components - Part 3. upper limb prostheses
Description "part. This section compared with the GB/T 17255.3-1998, the main changes are as follows.
a) the normative references, the references GB/T 14191.1 "Prosthetics and orthotics academic language - Part 1. In vitro and prostheses
In vitro orthotics basic terminology "(GB/T 14191.1-2009, ISO 8549-1. 1989, IDT);
b) on the part of inaccurate statements made changes to the terms and definitions, such as "support of" to "support phase", "swing phase" to "put
Dynamic phase, "" instantaneous axis of rotation "to" instantaneous center of rotation "and so on.
This section proposed by the People's Republic of China Ministry of Civil Affairs.
This part of the National Rehabilitation and special equipment Standardization Technical Committee on Persons with Disabilities (SAC/TC148) centralized.
This section drafted by. China Rehabilitation Devices Association, orthopedic technology center in Beijing, China orthopedic technical secondary
SCHOOL.
The main drafters of this section. Yangcheng Rui, Wu Guoshi, the new party.
This part of the standard replaces the previous editions are.
--- GB/T 17255.3-1998.
GB/T 17255.3-2009/ISO 13405-3.1996
Introduction
There is currently no method for classification and description of prosthetic components can be used in an international context. One can imagine, this situation
Manufacturers use a word to describe their products and the operator of the medical reports written at the time of reception of specific patient difficult.
The purpose of this part of the standard is to ensure that users can clearly explains the basic components of the finished prosthetic according to the classification and description of the system
Features.
Producer's name, materials and production processes used are not included herein.
GB/T 17255.3-2009/ISO 13405-3.1996
Prosthetics and orthotics - Classification and description of prosthetic components
Part 3. Description of upper limb prosthetic components
1 Scope
GB/T 17255 provisions of this section describes a method for upper limb prosthetic components.
2 Normative references
The following documents contain provisions which, through reference GB/T 17255 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 14191.1 Prosthetics and orthotics academic language - Part 1. Basic terminology external limb prostheses and external orthoses
(GB/T 14191.1-2009, ISO 8549-1. 1989, IDT)
GB/T 17255.1 Prosthetics and orthotics - Classification and description of prosthetic components - Part 1. Classification of prosthetic components
(GB/T 17255.1-2009, ISO 13405-1.1996, IDT)
ISO 8549-2. 1989 Prosthetics and orthotics academic language - Part 2. With external limb prostheses and prosthetic users such relevant
the term
3 Terms and Definitions
GB/T 14191.1, ISO 8549-2. terms and definitions established in 1989 applies to GB/T 17255 in this section.
Category 4
Upper limb prosthetic components according to GB/T 17255.1 The definition includes five types.
5 engaging member
5.1 receiving chamber
5.1.1 Overview
Receiving chamber through the following description.
5.1.2 amputation
According to the provisions of ISO 8549-2 series of amputation and prosthetic socket production-related statements as follows.
a) partial hand amputation;
b) Wrist disarticulation;
c) the elbow amputation;
d) elbow disarticulation;
e) elbow amputation;
f) shoulder disarticulation;
g) shoulder girdle amputation.
5.1.3 force transmission performance
Note. The force transmission and reception performance is directly related to the shape of the cavity, the support, stability and suspension effect of these forces on the receiving chamber is necessary.
GB/T 17255.3-2009/ISO 13405-3.1996
|