|
US$94.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14798-2008: Geosynthetics -- Identification on site
Status: Valid GB/T 14798: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 14798-2008 | English | 94 |
Add to Cart
|
3 days [Need to translate]
|
Geosynthetics -- Identification on site
| Valid |
GB/T 14798-2008
|
| GB 14798-1993 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Geotextiles. Identification on site
| Obsolete |
GB 14798-1993
|
PDF similar to GB/T 14798-2008
Basic data | Standard ID | GB/T 14798-2008 (GB/T14798-2008) | | Description (Translated English) | Geosynthetics -- Identification on site | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | W59 | | Classification of International Standard | 59.080.70 | | Word Count Estimation | 5,599 | | Date of Issue | 8/6/2008 | | Date of Implementation | 6/1/2009 | | Older Standard (superseded by this standard) | GB 14798-1993 | | Quoted Standard | GB/T 13759; GB/T 13762 | | Adopted Standard | ISO 10320-1999, IDT | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 2008 (No. 125 overall) 12 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies geosynthetics be marked with the information for users of the site to identify whether the product is consistent with the order. The main purpose of this standard is to accurately identify the geosynthetics, such as identification of no packaging or is not geosynthetic products into volume. Information specified in this standard can not replace the technical data, the product can not be used to verify compliance with the technical requirements of the degree. | GB/T 14798-2008: Geosynthetics -- Identification on site---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Geosynthetics. Identification on site
ICS 59.080.70
W59
National Standards of People's Republic of China
GB/T 14798-2008/ISO 10320.1999
Replacing GB 14798-1993
Geosynthetics site identification logo
(ISO 10320.1999, Geotextilesandgeotextile-related
products-Identificationonsite, IDT)
Posted 2008-08-06
2009-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is equivalent to international standard ISO 10320.1999 "Geotextiles and related products on-site identification ID" (in English).
This standard is equivalent to translate ISO 10320.1999, for ease of use, this standard made the following editorial changes.
--- "This International Standard" be replaced by "this standard";
--- Deleted international standards foreword;
--- In order to be consistent with the existing series of standards, the standard name from "geotextile related products - Identification of site identification" to "earth
Synthetics site identification ID ";
--- International standards cited in Chapter 2 and the corresponding European standards replace the national standards;
--- Deletion of the ISO 10320.1999 Information Annex ZZ.
This standard replaces GB 14798-1993 "geotextile identification mark."
This standard GB 14798-1993 made the following modifications.
--- By the recommended standards into mandatory standards;
--- Standard name changed to "Geosynthetics site identification ID";
--- In Chapter 3, add a "supplier" and "product name" is defined;
--- For the contents of Chapter 4 identifies discrimination were amended and supplemented, and increase the content of the "ID" tag mode.
The standard proposed by China Textile Industry Association.
This standard by the National Standardization Technical Committee Textile textiles Club (SAC/TC209/SC7) centralized.
This standard drafting of the main unit. Institute of Textile Industry Standardization.
The main drafters of this standard. Xu Road.
This standard replaces the standards previously issued as follows.
--- GB 14798-1993.
GB/T 14798-2008/ISO 10320.1999
Geosynthetics site identification logo
1 Scope
This standard specifies the geosynthetics to be marked with information to identify the product user site is consistent with the order. This standard
The main purpose is to accurately identify geosynthetics, such as identification of unpackaged or is not geosynthetic products into volume.
Information specified in this standard can not replace the technical data can not be used to verify that products comply with the technical requirements of the degree.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. Undated document, the latest versions apply to this standard.
GB/T 13759 Geosynthetics - Terms and definitions (GB/T 13759-2008, ISO 10318.2005, IDT)
GB /synthetic material mass per unit area was measured T 13762 geotextile (GB/T 13762-2008, ISO 9864.2005, IDT)
NOTE. ISO 10320 cited EN965 "geotextile - related products - Determination of mass per unit area" and ISO 9864 "mass per unit area of \u200b\u200bgeotextiles
The content of the determination of the amount of "in.
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
Sell \u200b\u200bor provide geosynthetics individual or organization.
Note. Non-manufacturers' suppliers are believed to full compliance with the manufacturer's responsibility.
3.2
All product names or specific product ranges given.
Note. Sometimes called the brand name.
3.3
Description number or code that represents a particular specification specific material production (with tolerances) products.
3.4
Number or other code and other information, details of the original manufacturer of the final product can be traceable stage, including product producer
Point and date of manufacture.
4 Authentication Identifier
Geosynthetics each unit shall provide the following information.
a) manufacturers and (or) suppliers;
b) the product name;
c) Model;
d) batch number;
GB/T 14798-2008/ISO 10320.1999
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14798-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 14798-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 14798-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14798-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 14798-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14798-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|