|
US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13936-2014: Rubber, vulcanized -- Method for determination of strength properties of adhesive to metal in shear by tension loading
Status: Valid GB/T 13936: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 13936-2014 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Rubber, vulcanized -- Method for determination of strength properties of adhesive to metal in shear by tension loading
| Valid |
GB/T 13936-2014
|
| GB/T 13936-1992 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Rubber, vulcanized. Method for determination of strength properties of adhesive to metal in shear by tension loading
| Obsolete |
GB/T 13936-1992
|
PDF similar to GB/T 13936-2014
Basic data | Standard ID | GB/T 13936-2014 (GB/T13936-2014) | | Description (Translated English) | Rubber, vulcanized -- Method for determination of strength properties of adhesive to metal in shear by tension loading | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G40 | | Classification of International Standard | 83.060 | | Word Count Estimation | 6,613 | | Date of Issue | 12/12/2014 | | Date of Implementation | 6/1/2015 | | Older Standard (superseded by this standard) | GB/T 13936-1992 | | Quoted Standard | GB/T 2941; GB/T 17200 | | Regulation (derived from) | National Standards Bulletin 2014 No. 30 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies vulcanized rubber to metal bonding method Determination of tensile shear strength. This Standard is applicable to rubber produced under specified conditions with two parallel metal bonding shear specimen. Rubber and metal may be bo | GB/T 13936-2014: Rubber, vulcanized -- Method for determination of strength properties of adhesive to metal in shear by tension loading
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rubber, vulcanized. Method for determination of strength properties of adhesive to metal in shear by tension loading
ICS 83.060
G40
National Standards of People's Republic of China
Replacing GB/T 13936-1992
Vulcanized rubber and metal adhesive tensile shear strength
test methods
Rubber, vulcanized-Methodfordeterminationofstrengthpropertiesof
Issued on. 2014-12-22
2015-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard GB/T 1.1-2009 given rule drafting.
This standard replaces GB/T 13936-1992 "vulcanized rubber and metal adhesive tensile shear strength measurement method" and GB/T 13936-
The main technical changes compared to 1992 are as follows.
--- Increasing the foreword;
--- Increased warning;
--- Increased Normative references GB/T 17200 (see Chapter 2);
--- Increase the tensile testing machine force measurement accuracy requirements (see 4.1.1);
--- Updated the recommended grade metal material. use "2A12-T4 aluminum" instead of "LY12-CZ aluminum alloy", with "0Cr18Ni11Ti
Stainless steel "instead of" 1Cr18Ni9Ti stainless steel ", with" carbon steel 45 "instead of" carbon 45 "(see 52, 1992. Version 5.2.);
--- Added adhesive selection requirements (see section 6.2);
--- Sample bonding process requirements for classification is described (see 6.4,1992 Version 6.3);
--- Adjust the relative humidity of the test environment, the "60% to 70%" with "50% ± 5%". (See 7.2,1992 Version 7.2).
The standard proposed by China Petroleum and Chemical Industry Association.
This standard by the national Common test methods for rubber and rubber goods Technical Committee of Standardization Technical Committee (SAC/TC35/SC2)
Centralized.
This standard is mainly drafted by. Triangle Tire Co., Ltd., Jiangsu Granville true test Machinery Co., Ltd., Beijing Rubber Industry Research
Design Institute, Guangzhou Institute of Materials Co., Ltd.
The main drafters of this standard. Xuqiu Huan, YAN Fu Jiang, Shen Ke Council Xiejun Fang, Li Jing, Xie Yufang, Yi Jun.
This standard replaces the standards previously issued as follows.
--- GB/T 13936-1992.
Vulcanized rubber and metal adhesive tensile shear strength
test methods
Warning. Use of this standard shall have a person experiences regular laboratory work. This standard does not point out all possible security issues,
Users have the responsibility to take appropriate safety and health practices and to ensure compliance with the conditions relevant national regulations.
1 Scope
This standard specifies the method for determination of vulcanized rubber and metal adhesive tensile shear strength.
This standard applies to rubber under specified conditions of preparation and two parallel metal sheets bonded shear specimens. Rubber and metal can be through
Curing the adhesive, the rubber may be vulcanized using adhesive bonding.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2941 rubber physical test method for preparing and conditioning General Procedure (GB/T 2941-2006, ISO 23529.2004,
IDT)
GB/T 17200 Rubber Plastic tensile, compression and bending test machine (constant speed drive) Technical Specification (GB/T 17200-2008,
ISO 5893.2002, IDT)
Principle 3
Sample of rubber sandwiched structure with two parallel metal sheets overlap between. Applying a tensile shear strength in the bonding surface of the sample, the measurement sample broke
Bad maximum tensile shear strength. Maximum tensile shear adhesive area on the sample unit for vulcanized rubber and metal adhesive tensile shear strength.
4 Test equipment and devices
4.1 tensile testing machine
4.1.1 tensile testing machine in line with GB/T 17200 regulations, the force measurement precision level 2.
4.1.2 tensile testing machine equipped with suitable means, the loading force direction and the center line of the sample is consistent.
Measuring 4.2
Resolution measurement specimen gage length and width of the bonding surface is not less than 0.05mm.
5 Sample
The shape and dimensions of 5.1 specimens shall conform to Figure 1. Bond length of the sample is (12.5 ± 0.5) mm. The length of the metal sheet (100.0 ±
0.2) mm, a width of (25.0 ± 0.2) mm, a thickness of (2.0 ± 0.1) mm. The length of the rubber sheet was (12.5 ± 0.5) mm, a width
(25.0 ± 0.2) mm, a thickness of (2.0 ± 0.1) mm.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13936-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 13936-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 13936-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13936-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 13936-2014?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13936-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|