GB 5606.6-2005 PDF English
US$215.00 · In stock · Download in 9 secondsGB 5606.6-2005: Cigarettes -- Part 6: Quality evaluation Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB 5606.6: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB 5606.6-2005 | English | 215 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Cigarettes -- Part 6: Quality evaluation
| Valid |
| GB 5606.6-1996 | English | 199 |
Add to Cart
|
2 days
|
Cigarettes--Quality comprehensive judgement
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB 5606.6-2005
GB 5606.6-2005: Cigarettes -- Part 6: Quality evaluation---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB5606.6-2005
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 65.160
X 87
Replacing GB 5606.6-1996
Cigarettes – Part 6.Quality Evaluation
Issued on: JUNE 17, 2005
Implemented on: SEPTEMBER 1, 2005
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People’s Republic of China;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative References... 4
3 Quality Evaluation... 4
Appendix A (Normative) Cigarette Quality Inspection Result... 10
Cigarettes - Part 6.Quality Evaluation
1 Scope
This standard specifies the quality evaluation method for cigarettes.
This part is applicable to cigarettes.
2 Normative References
The following normative documents contain provisions which, through reference in this
standard, constitute provisions of this standard. For dated references, subsequent amendments
to (excluding amending errors in the text), or revisions of, any of these publications do not
apply. However, all parties coming to an agreement according to this standard are encouraged
to study whether the latest edition of the normative document is applicable. For undated
references, the latest edition of the normative document applies.
GB 5606.2 Cigarettes - Part 2.Mark
GB 5606.3 Cigarettes - Part 3.Technical Requirements for Packing, Making, Storage
and Transport
GB 5606.4 Cigarettes - Part 4.Technical Requirements for Sense Evaluation
GB 5606.5 Cigarettes - Part 5.Mainstream Smoke
3 Quality Evaluation
3.1 Inspection classification
The cigarette inspection is classified into type inspection, leave factory inspection and
supervision inspection. All items shall be inspected with respect to type inspection; the quality
defect item of Categories A and B shall be inspected with respect to supervision inspection in
the case of no special provision; the inspection items are determined by the producer
according to the quality control requirement with respect to leave factory inspection, for the
purpose of guaranteeing product quality, at least all Category A quality defect items of shall
be inspected.
3.2 Mark
3.2.1 The mark quality defect is classified into Category A and Category B, and the mark
includes general requirements and the corresponding mark requirements for different packs
(such as case, carton and packet); the above mark shall be inspected according to GB 5606.2.
3.2.2 In case that any Category A quality defect item is inspected, this lot of cigarettes will
be regard as rejected and mark score is zero.
3.2.3 The unit deduction value (case, carton and packet) for Category B quality defect item
is provided in Table 1.Deduction value of quality defect item is calculated by quality defect
quantity for such item being multiplied by unit deduction value. The mark evaluation is
expressed with centesimal system, so the score is obtained by 100 subtracting the total
deduction value of all quality defects; such score will be replaced by zero in case of minus.
3.3 Packing and making quality
3.3.1 Packing and making quality includes casing, cartoning, packeting, appearance,
extinguish, moisture content, circle, length, draw resistance, mass, hardness, dust content,
content of loss of tobacco from the ends and degree of total ventilation; which shall be
inspected according to GB 5606.3.
3.3.2 The Packing and making quality defect is classified into Categories A, B and C. The
unit deduction value for Category A quality defect of is provided in Table 2 and those of
Categories B and C are provided in Table 3.
3.3.3 Deduction value of quality defect item is calculated by quality defect quantity for such
item being multiplied by total unit deduction value. The mark evaluation is expressed with
centesimal system, so the score is obtained by 100 subtracting the total deduction value of all
quality defects; such score will be replaced by zero in case of minus.
3.3.4 In case that the score for packing and making quality is less than 60, such lot of
cigarettes will be judged as rejected.
3.5.2.5 In the case that catrame per packet is not less than 11mg, if ｜measured catrame -
catrame per packet｜≤ 2.5mg, it is scored according to the catrame grade; otherwise the score
is zero and this lot of cigarettes will be judged as rejected.
3.5.3 Nicotine quantity
3.5.3.1 The centesimal system shall be adopted for the nicotine quantity evaluation.
3.5.3.2 In case that the nicotine quantity per packet is not more than 0.4mg, if｜measured
nicotine quantity - nicotine quantity per packet｜≤0.10mg, the score is 100; otherwise zero.
3.5.3.3 In case that the nicotine quantity per packet is within 0.5~1.0mg, if｜measured
nicotine quantity - nicotine quantity per packet｜≤0.20mg, the score is 100; otherwise zero.
3.5.3.4 In case that the nicotine quantity per packet is not less than 1.1mg, if｜measured
nicotine quantity - nicotine quantity per packet｜≤0.30mg, the score is 100; otherwise zero.
3.5.4 CO quantity in smoke
3.5.4.1 The CO quantity grade and corresponding CO quantity per packet are provided in
Table 6.
3.5.4.2 The centesimal system is adopted for CO quantity evaluation. The score for low,
medium and high grade are 100, 80 and 50 respectively.
3.5.4.3 In case that the CO quantity per packet is not more than 4mg, if｜measured nicotine
- nicotine per packet｜≤1.0mg, it is scored according to the CO quantity grade; otherwise the
score is zero.
3.5.4.4 In case that the CO quantity per packet is within 5~10mg, if｜measured nicotine -
nicotine per packet｜≤2.0mg, it is scored according to the CO quantity grade; otherwise the
score is zero.
3.5.4.5 In case that the CO quantity per packet is not less than 11mg, if｜measured nicotine
- nicotine per packet｜≤3.0mg, it is scored according to the CO quantity grade; otherwise the
score is zero.
3.6 Total score for cigarette quality evaluation
3.6.1 Total score for cigarette quality evaluation shall be calculated according to Formula
(1).
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB 5606.6-2005 be delivered?Answer: The full copy PDF of English version of GB 5606.6-2005 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB 5606.6-2005_English with my colleagues?Answer: Yes. The purchased PDF of GB 5606.6-2005_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 5606.6-2005 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB 5606.6-2005?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 5606.6-2005 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB 5606.6-2005?A step-by-step guide to download PDF of GB 5606.6-2005_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB 5606.6-2005".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|