GB 5606.3-2005 PDF in English
GB 5606.3-2005 (GB5606.3-2005) PDF English
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB 5606.3-2005 | English | 170 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Cigarettes -- Part 3: Technical requirements for packing, making, storage and transport
| Valid |
| GB 5606.3-1996 | English | 199 |
Add to Cart
|
2 days
|
Cigarettes--Making technical requirment
| Obsolete |
Standards related to (historical): GB 5606.3-2005
PDF Preview
GB 5606.3-2005: PDF in English GB 5606.3-2005
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 65.160
X 87
Replacing GB 5606.3-1996
Cigarettes - Part 3.Technical requirements for packing,
making, storage and transport
ISSUED ON. JUNE 17, 2005
IMPLEMENTED ON. SEPTEMBER 01, 2005
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of PRC;
National Standardization Administration.
Table of Contents
Foreword... 3
1 Scope... 5
2 Normative references... 5
3 Terms and definitions... 5
4 Product category... 7
5 Requirements... 7
6 Test method... 10
7 Inspection rules... 12
8 Storage and transportation... 13
Foreword
GB 5606 "Cigarettes" is divided into six parts.
- Part 1.Sampling;
- Part 2.Mark;
- Part 3.Technical requirements for packing, making, storage and transport;
- Part 4.Technical requirements for sense evaluation;
- Part 5.Mainstream smoke;
- Part 6.Quality evaluation.
This Part is Part 3 of GB 5606.
The category A and B quality defects of 5.2 ~ 5.3 and 7.6 of this Part are mandatory.
This Part replaces GB 5606.3-1996 "Cigarettes - Making technical requirement".
Compared with GB 5606.3-1996, the main changes of this Part are as follows.
- ADD technical indicators and definitions such as content of loss of tobacco from
the ends and degree of total ventilation;
- DIVIDE the technical requirements for packaging and making into three
categories. A, B, C, according to the severity of quality defects;
- CHANGE the water content to moisture content; ADJUST the tolerance range of
draw resistance, circumference, hardness, quality, as well as the index requirements
of dust content and moisture content;
- SPECIFY different unit deduction values for the three different quality defects of
categories A, B, C. CANCEL the limit on the highest score of each single item.
SPECIFY that when the quality score of cigarette packaging and making is
negative, it is counted as zero;
- ADD the requirements for "storage and transportation".
This Part was proposed by the State Tobacco Monopoly Administration.
This Part shall be under the jurisdiction of the National Tobacco Standardization
Technical Committee (TC 144).
Drafting organizations of this Part. State Tobacco Monopoly Administration,
Zhengzhou Tobacco Research Institute of China National Tobacco Corporation.
Cigarettes - Part 3.Technical requirements for packing,
making, storage and transport
1 Scope
This Part of GB 5606 specifies the cigarette packaging, making technical requirements,
test methods, inspection rules, storage and transportation.
This Part applies to cigarettes.
2 Normative references
The clauses in the following documents become the clauses of this Part through
reference to this Part of GB 5606.For any referenced document with a date, all
subsequent amendments (excluding errata) or revisions are not applicable to this Part.
However, parties to an agreement based on this Part are encouraged to study whether
the latest versions of these documents can be used. For any referenced document
without a date, the latest version shall apply to this Part.
GB/T 5606.1-2004 Cigarettes - Part 1.Sampling
GB/T 16447 Tobacco and tobacco products - Atmosphere for conditioning and
testing (GB/T 16447-2004, ISO 3402.1999, IDT)
GB/T 19610 Cigarettes - Determination of ventilation - Definitions and
measurement principles (GB/T 19610-2004, ISO 9512.2002, IDT)
YC/T 28 (all parts) Test of cigarette physical characteristics
YC/T 151.2 Cigarettes - Determination of loss of tobacco from the ends - Part 2.
Method using a rotating cubic box (YC/T 151.2-2001, idt ISO 3550-2.1997)
3 Terms and definitions
The following terms and definitions apply to this Part.
3.1
Draw resistance
The resistance of a cigarette when it is drawn. It is expressed by the static pressure
difference at both ends of a cigarette when a certain flow rate of air flows through
the cigarette under a certain atmospheric environment.
3.2
Hardness
The ability of a cigarette to resist deformation in the radial direction under a certain
atmospheric environment. It is expressed as the percentage -- of the length in the
diameter direction of the cigarette to the original diameter -- after a certain area of
the probe and a certain pressure are applied to the cigarette for a certain period of
time.
3.3
Dust content
The percentage -- of tobacco dust of a certain size in tobacco shreds to the mass of
tobacco shreds.
3.4
Loose ends
The hollow of a certain area and depth, which is formed at the end of a cigarette due
to the lack of tobacco filling.
3.5
Seam open
The crack that appears after the cigarette seam is broken.
3.6
Extinguish
The phenomenon that a cigarette stops smoldering after being ignited.
3.7
Degree of total ventilation
The sum of the ventilation rate of the filter tip and the ventilation rate of the paper.
3.8
Content of loss of tobacco from the ends
6.3.4 Hardness
Randomly select 30 pcs from the test samples as test portion, to test them one by one
according to the provisions of YC/T 28.6.
6.3.5 Moisture content
According to 5.1.4.2 of GB/T 5606.1-2004, obtain the test sample, to carry out the test
according to YC/T 28.8.
6.3.6 Quality
Randomly select 30 pieces from the test sample as test portion, to test them one by one
according to the provisions of YC/T 28.4.
6.3.7 Length
Randomly select 30 pieces from the test sample as test portion, to test them one by one
according to the provisions of YC/T 28.2.
6.3.8 Degree of total ventilation
Randomly select 30 pieces from the test sample as test portion, to test them one by one
according to the provisions of GB/T 19610.
6.3.9 Dust content
Randomly select 20 pieces from the test sample as test portion, to test them according
to the provisions of YC/T 28.7.
6.4 Extinguish
Randomly select 10 cigarettes from the test sample as test portion, to test them one by
one according to YC/T 28.11.
6.5 Appearance
6.5.1 Obtain test portion according to 5.1.4 of GB/T 5606.1-2004, remove cigarettes
with packaging defects; perform loose end test one by one according to YC/T 28.9.
6.5.2 Use the test portion after removing loose end cigarettes in 6.5.1; perform other
appearance tests one by one according to YC/T 28.12.
6.5.3 From the defective test samples eliminated in 6.5.2, randomly take 10 cigarettes
as test portion, to carry out the open seam test one by one according to YC/T 28.10.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|