|
US$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 46037-2025: Non-traditional machines - Safety technical requirements
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 46037-2025 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Non-traditional machines - Safety technical requirements
| Valid |
GB 46037-2025
|
Standard similar to GB 46037-2025 GB/T 51033 GB/T 50082 Basic data | Standard ID | GB 46037-2025 (GB46037-2025) | | Description (Translated English) | Non-traditional machines - Safety technical requirements | | Sector / Industry | National Standard | | Classification of Chinese Standard | J59 | | Classification of International Standard | 25.080.99 | | Word Count Estimation | 14,184 | | Date of Issue | 2025-08-01 | | Date of Implementation | 2026-08-01 | | Older Standard (superseded by this standard) | GB 13567-1998, GB 19998-2005, GB 20775-2006, GB 25493-2010, GB 26503-2011 | | Issuing agency(ies) | State Administration for Market Regulation, Standardization Administration of China | GB 46037-2025: Non-traditional machines - Safety technical requirements---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB46037-2025
ICS 25.080.99
CCSJ59
National Standard of the People's Republic of China
Replaces GB 13567-1998, GB.19998-2005, GB 20775-2006, GB 25493-2010, GB 26503-2011
Safety technical requirements for special processing machine tools
Released on August 1, 2025
Implementation on August 1, 2026
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 General safety requirements 2
4.1 General Principles 2
4.2 General requirements 2
4.3 Mechanical and electrical safety 3
4.4 Control systems and devices 3
4.5 Safety protection devices 3
4.6 Immunity 3
4.7 Pneumatics and Hydraulics 4
4.8 Lighting 5
5 Safety requirements for EDM machines 5
5.1 Mechanical safety and protection 5
5.2 Electrical Hazards and Protection 5
5.3 Fire and explosion prevention 5
5.4 Oil mist and smoke 5
5.5 Working fluid system 5
6 Safety requirements for electrochemical machining machines 6
6.1 Mechanical Safety and Protection 6
6.2 Electrical Hazards and Protection 6
6.3 Electrolyte System 6
6.4 Protection against harmful gases 6
6.5 Corrosion protection 6
7 Safety requirements for additive manufacturing machine tools 7
7.1 Mechanical safety and protection 7
7.2 Electrical Hazards and Protection 7
7.3 Temperature Control Safety and Protection 7
7.4 Radiation Safety and Protection 7
7.5 Safety and protection against hypoxia and asphyxiation 8
7.6 Fire and explosion protection 8
7.7 Emissions of Hazardous Substances 8
8 Safety requirements for laser processing machines 8
8.1 Mechanical Safety and Protection 8
8.2 Control device and control circuit 8
8.3 Laser Radiation Safety and Protection 8
8.4 Protection against hazardous substances 9
Preface
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
This document replaces GB 13567-1998 "Technical requirements for safety protection of EDM machines", GB.19998-2005 "Technical requirements for safety protection of EDM machines"
GB 20775-2006 "Technical Requirements for Safety Protection of Machine Tools",
GB 25493-2010 "Technical requirements for safety protection of rapid prototyping machine tools using laser as processing energy" and GB 26503-2011 "Technical requirements for safety protection of rapid prototyping machine tools using laser as processing energy"
"Technical requirements for safety protection of forming machine tools", this document is in accordance with GB 13567-1998, GB.19998-2005, GB 20775-2006,
Compared with GB 25493-2010 and GB 26503-2011, in addition to structural adjustments and editorial changes, the main technical changes are as follows.
--- Added "General Safety Requirements", summarizing the technical content applicable to various types of special processing machine tools (see Chapter 4);
--- Changed the requirements for the use of flammable working fluids for EDM machines (see 5.3.1, 5.6.1 of GB 13567-1998);
--- Added "Safety and protection against hypoxia and asphyxiation" technical requirements for safety protection of additive manufacturing machine tools (see 7.5);
--- Added "Safety requirements for laser processing machine tools" (see Chapter 8);
--- Deleted "Information for use" and "Inspection of safety protection requirements" (see GB 13567-1998, GB.19998-2005,
GB 20775-2006, GB 25493-2010, GB 26503-2011, Chapters 6 and 7).
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document is proposed and coordinated by the Ministry of Industry and Information Technology of the People's Republic of China.
The previous versions of this document and the documents it replaces are as follows.
---GB 13567-1998;
---GB.19998-2005;
---GB 20775-2006;
---GB 25493-2010;
---GB 26503-2011;
---This is the first revision, integrating the above five standards.
Safety technical requirements for special processing machine tools
1 Scope
This document specifies the general safety requirements for special processing machine tools, as well as EDM machine tools, ECM machine tools, and additive manufacturing machine tools.
and safety requirements for laser processing machine tools.
This document applies to the design, manufacture and use of various types of special processing machine tools.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 261 Determination of flash point - Pensky-Martin closed cup method
GB/T 5226.1 Electrical safety of machinery - Electrical equipment of machinery - Part 1.General technical requirements
GB/T 7247.1 Safety of laser products Part 1.Equipment classification and requirements
GB/T 7247.4 Safety of Laser Products Part 4.Laser Protection Screens
GB/T 14896.1 Terminology for special processing machine tools Part 1.Basic terms
GB/T 14896.2 Terminology of special machining machine tools Part 2.Electrical discharge machining machine tools
GB/T 14896.3 Terminology of special machining machine tools Part 3.Electrochemical machining machine tools
GB/T 14896.7 Terminology of special processing machine tools Part 7.Additive manufacturing machine tools
GB/T 14896.9 Terminology of special processing machine tools Part 9.Laser processing machine tools
GB 15577 Safety regulations for dust explosion prevention
GB/T 17626.2 Electromagnetic compatibility test and measurement technology Electrostatic discharge immunity test
GB/T 17626.4 Electromagnetic compatibility test and measurement technology Electrical fast transient burst immunity test
GB/T 17626.5 Electromagnetic compatibility test and measurement technology surge (shock) immunity test
GB/T 17626.8 Electromagnetic compatibility test and measurement technology Power frequency magnetic field immunity test
GB/T 17626.11 Electromagnetic compatibility test and measurement techniques Part 11.For devices with input current less than or equal to 16A per phase
Voltage dips, short interruptions and voltage variations immunity test for equipment
GB/T 18490.1 Mechanical safety Laser processing machines Part 1.General safety requirements
GB/T 18569.1 Safety of machinery - Reducing the risks to health from hazardous substances emitted by machinery - Part 1.Safety of machinery for use in machinery manufacturing
Business principles and norms
GB/T 18569.2 Safety of machinery - Reducing the risks to health from hazardous substances emitted by machinery - Part 2.Generation and verification process
Method
GB/T 28780 Mechanical safety - Integral lighting systems for machines
3 Terms and Definitions
GB/T 7247.1, GB/T 14896.1, GB/T 14896.2, GB/T 14896.3, GB/T 14896.7 and GB/T 14896.9
The following terms and definitions apply to this document.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 46037-2025_English be delivered?Answer: Upon your order, we will start to translate GB 46037-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB 46037-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB 46037-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|