|
US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 24848-2010: Minimum allowable values of energy efficiency and energy efficiency grades for heater of petroleum industry
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 24848-2010 | English | 149 |
Add to Cart
|
2 days [Need to translate]
|
Minimum allowable values of energy efficiency and energy efficiency grades for heater of petroleum industry
| Valid |
GB 24848-2010
|
PDF similar to GB 24848-2010
Standard similar to GB 24848-2010 GB 24850 GB/T 24915 GB 24500 GB/T 24851 Basic data | Standard ID | GB 24848-2010 (GB24848-2010) | | Description (Translated English) | Minimum allowable values of energy efficiency and energy efficiency grades for heater of petroleum industry | | Sector / Industry | National Standard | | Classification of Chinese Standard | F01 | | Classification of International Standard | 27.010 | | Word Count Estimation | 5,521 | | Date of Issue | 2010-06-30 | | Date of Implementation | 2010-12-01 | | Quoted Standard | SY/T 0540; SY/T 6381 | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 2 of 2010 (total 157) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Chinese standard applies at an altitude of 3 500 m or less, onshore oil and gas fields and long- distance pipelines used in gas or liquid (oil) energy as fuel, the rated thermal load at 40 kW-12 000 kW within the petroleum industry furnace (hereinafter referred to as the furnace). | GB 24848-2010: Minimum allowable values of energy efficiency and energy efficiency grades for heater of petroleum industry
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Minium allowable values of energy efficiency and energy efficiency grades for heater of petrolrum idustry
ICS 27.010
F01
National Standards of People's Republic of China
Industrial furnace oil
Energy efficiency of limited value and energy efficiency rating
Issued on. 2010-06-30
2010-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
4.3, 4.4 of this standard are mandatory, the rest are recommended.
The standard proposed by China National Petroleum Corporation.
This standard by the National Standardization Technical Committee for Energy and Management.
This standard is drafted by. China National Petroleum Corporation Petroleum Engineering energy-saving technology research and development centers.
Participated in the drafting of this standard. China National Petroleum Corporation Quality Management and Energy Ministry, China Petroleum & Chemical Corporation oil
Field Development Division, China National Petroleum Exploration and Production Company Limited, Daqing Petroleum Institute, China Petroleum Pipeline Machinery Manufacturing has
Limited liability company, China National Petroleum Corporation, Northwest Energy Conservation Monitoring Centre, the Daqing oil field equipment manufacturing group.
Drafters of this standard. according to Wu Yun, Xue-Wen Wang, The Middle, ZHAO Gui Zi, Jin Xin, a Qinglin, SUN Yu, Zou Feng, Zhu Bin, Xuxiu Fen,
It's coming now.
Industrial furnace oil
Energy efficiency of limited value and energy efficiency rating
1 Scope
This standard specifies the petroleum industry furnace energy efficiency rating, energy efficiency limit, the target energy efficiency limit values, evaluating values of energy conservation and test
method.
This standard applies to the following at an altitude of 3500m, onshore oil and gas fields and long-distance pipelines used in gas or liquid (oil) as fuel energy,
Rated thermal load within the range of 40kW ~ 12000kW oil industry (hereinafter referred to as the furnace) by a heating furnace.
This standard does not apply to solid energy as furnace fuel.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
SY/T 0540 Petroleum Industrial Furnace Types and basic parameters
SY/T 6381 Determination of thermal furnace
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
Furnace energy efficiency limit minimumalowablevaluesofenergyefficiencyforheater
Under standard test conditions, allowing the furnace efficiency minimum.
3.2
Furnace target energy efficiency limit targetminimumalowablevaluesofenergyefficiencyforheater
After the implementation of this standard certain number of years of formal implementation of the furnace energy efficiency limit values.
3.3
Furnace energy conservation evaluation values evaluatingvaluesofenergyconservationforheater
Under standard test conditions, energy efficiency of the furnace should reach a minimum value.
4. Technical Requirements
4.1 Basic requirements
General furnace performance, security, performance and design, manufacturing, quality and environmental requirements should conform to relevant standards.
4.2 furnace energy efficiency rating
Press SY/T 0540 provisions furnace heat load rated series divided rated furnace heat load range, oven energy efficiency rating
Divided into three, including an energy-efficient, the level not less than the furnace efficiency requirements in Table 1.
Table 1 furnace energy efficiency rating
Rated thermal load P/kW
Furnace Efficiency /%
Gas furnace oil furnace
Level 1 2 3 1 2 3
P < 200 87 86 80 86 85 79
Table 1 (continued)
Rated thermal load P/kW
Furnace Efficiency /%
Gas furnace oil furnace
Level 1 2 3 1 2 3
200≤P < 500 87 87 82 87 86 81
500≤P < 1000 89 88 84 88 87 83
1000≤P≤1200 90 89 85 89 88 84
1200 \u003cP≤1500 90 89 86 89 88 85
1500 \u003cP\u003c2000 91 90 87 90 89 86
2000≤P < 2500 91 90 88 90 89 87
2500≤P≤12000 92 91 89 91 90 88
Note. P is the nominal furnace heat load.
4.3 furnace energy efficiency limit
Furnace energy efficiency of limited value in Table 1 energy efficiency rating of three.
4.4 Furnace target energy efficiency limit
After three years from the date of implementation of this standard, furnace energy efficiency limit value is not less than specified in Table 2.
Table 2 furnace target energy efficiency limit
Rated thermal load P/kW
Furnace Efficiency /%
Gas furnace oil furnace
P < 200 83 82
200≤P < 500 85 84
500≤P < 1000 86 85
1000≤P≤1200 87 86
1200 \u003cP≤1500 88 87
1500 \u003cP\u003c2000 89 88
2000≤P < 2500 89 88
2500≤P≤12000 90 89
Note. P is the nominal furnace heat load.
4.5 furnace energy conservation evaluation values
Furnace energy saving evaluation value table 1 energy efficiency rating of two.
5 Test Methods
Furnace efficiency shall SY/T 6381 method to determine.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 24848-2010_English be delivered?Answer: Upon your order, we will start to translate GB 24848-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB 24848-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB 24848-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|