Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB 1903.55-2022 PDF English

US$95.00 · In stock · Download in 9 seconds
GB 1903.55-2022: National food safety standard - Food nutritional fortification substance - L(+)-Ascorbic acid
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB 1903.55-202295 Add to Cart Auto, 9 seconds. National food safety standard - Food nutritional fortification substance - L(+)-Ascorbic acid Valid

Similar standards

GB 1903.56   GB 1903.57   GB 1903.54   GB 1903.61   

GB 1903.55-2022: National food safety standard - Food nutritional fortification substance - L(+)-Ascorbic acid


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB1903.55-2022
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA National food safety standard - Food nutrition enhancer - Potassium L-ascorbate ISSUED ON: JUNE 30, 2022 IMPLEMENTED ON: DECEMBER 30, 2022 Issued by: National Health Commission of the People’s Republic of China; State Administration for Market Regulation.

Table of Contents

1 Scope ... 3 2 Molecular formula, structural formula, and relative molecular mass ... 3 3 Technical requirements ... 3 Appendix A Testing method ... 5 National food safety standard - Food nutrition enhancer - Potassium L-ascorbate

1 Scope

This standard applies to the food nutrition enhancer potassium L-ascorbate prepared from L-Ascorbic acid and potassium bicarbonate or potassium carbonate through a chemical reaction, crystallization, drying, and other processes.

2 Molecular formula, structural formula, and relative

molecular mass 2.1 Molecular formula C6H7KO6 2.2 Structural formula 2.3 Relative molecular mass 214.22 (according to 2018 International Relative Atomic Mass)

3 Technical requirements

3.1 Sensory requirements Sensory requirements shall meet the requirements in Table 1.

Appendix A

Testing method A.1 General provision Reagents and water used in this standard refer to analytically pure reagents and third- grade water in accordance with GB/T 6682 unless other requirements are indicated. The standard titration solution, standard solution for impurity determination, preparations, and products used in the test shall be prepared according to the provisions of GB/T 601, GB/T 602, and GB/T 603 unless other requirements are specified. The solution used in the test refers to the aqueous solution when the solvent preparation is not indicated. A.2 Identification test A.2.1 Solubility 1 g of sample can be dissolved in 2 mL of water. A.2.2 Identification A.2.2.1 Method summary The ascorbic acid part in the sample has a dienol group structure, strong reducibility, and the properties of sugars. A.2.2.2 Reagents and materials A.2.2.2.1 Activated carbon: powder, 75 μm ~ 180 μm (80 mesh ~ 200 mesh). A.2.2.2.2 Pyrrole. A.2.2.2.3 Hydrochloric acid. A.2.2.2.4 Glacial acetic acid (also known as glacial acetic acid). A.2.2.2.5 Alkaline cupric tartrate solution. A.2.2.2.6 Hydrochloric acid solution: 0.1 mol/L. Take 9.0 mL of hydrochloric acid (A.2.2.2.3), add water to dilute to 1000 mL, and shake well to obtain the solution. A.2.2.2.7 Trichloroacetic acid solution: Take 6 g of trichloroacetic acid, add 25 mL of trichloromethane to dissolve it, add 0.5 mL of 30% hydrogen peroxide solution, and shake well to obtain the solution. A.2.2.2.8 Sodium tetraphenylborate solution: 1 g/L. Take 0.1 g of sodium tetraphenylborate and dilute it with water to 100 mL. A.2.2.2.9 Methylene blue indicator solution: Dissolve 5 g of methylene blue in 95% ethanol and dilute to 1000 mL with 95% ethanol. A.2.2.3 Identification method A.2.2.3.1 The sample solution (20 mg/mL) can reduce the alkaline cupric tartrate solution at room temperature, and the reduction is more rapid when heated. A.2.2.3.2 Acidify 2 mL of the sample solution (20 mg/mL) with 0.5 mL of the hydrochloric acid solution, add 4 drops of methylene blue indicator solution, warm at 40 °C, and the dark blue color fades within 3 minutes. A.2.2.3.3 Dissolve 15 mg of the sample with 15 mL of the trichloroacetic acid solution, add about 200 mg of activated carbon, and shake vigorously for 1 min; filter through filter paper until the filtrate is clear, add 1 drop of pyrrole to 5 mL of filtrate, and stir slowly until the pyrrole dissolves; heat it on a water bath at 50 °C to produce a blue color. A.2.2.3.4 Characteristic reaction that presents the potassium salt A.2.2.3.4.1 Burn the platinum wire impregnated with hydrochloric acid until it becomes colorless on a colorless flame. Dip a little sample and burn it in a colorless flame. The flame is purple when observed through the cobalt glass. A.2.2.3.4.2 Take the sample, heat and ignite it to remove possible ammonium salts; after cooling, add water to dissolve, then add sodium tetraphenylborate solution (A.2.2.2.8) and glacial acetic acid (A.2.2.2.4), there shall be a white precipitate formed. A.3 Determination of potassium L-ascorbate content (by the dry basis) A.3.1 Method summary The redox reaction between the sample and the iodine standard titration solution occurs, and the titration end point is judged according to the color of the iodine standard titration solution. A.3.2 Reagents and materials A.3.2.1 Phosphorus pentoxide. A.3.2.2 Sulfuric acid solution: Take 57 mL of sulfuric acid, and slowly pour it into an appropriate amount of water; cool to room temperature, add water to dilute to 1000 mL, ......

Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB 1903.55-2022 be delivered?Answer: The full copy PDF of English version of GB 1903.55-2022 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB 1903.55-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB 1903.55-2022_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 1903.55-2022 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of GB 1903.55-2022?

A step-by-step guide to download PDF of GB 1903.55-2022_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB 1903.55-2022".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9