GB 16410-2020 PDF EnglishUS$655.00 · In stock · Download in 9 seconds
GB 16410-2020: Domestic gas cooking appliances Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB 16410: Historical versions
Similar standardsGB 16410-2020: Domestic gas cooking appliances---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB16410-2020GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 97.040.20 Q 82 Replacing GB 16410-2007 Domestic gas cooking appliances Issued on: DECEMBER 24, 2020 Implemented on: JANUARY 01, 2022 Issued by. State Administration for Market Regulation; Standardization Administration of PRC. Table of ContentsForeword... 4 1 Scope... 6 2 Normative references... 6 3 Terms and definitions... 8 4 Product classification... 12 5 Requirements... 14 6 Test method... 38 7 Marking, packaging... 79 Appendix A (Informative) Emission level of nitrogen oxide [NOx (α = 1)]... 84 Appendix B (Informative) Size of built-in hole of built-in stove... 86 References... 871 ScopeThis standard specifies the terms and definitions, product classification, requirements, test methods, markings, packaging of domestic gas cooking appliances. This standard applies to domestic gas cooking appliances, that use town gas, AND domestic gas-electric combined stoves, that use town gas and electric energy, including. a) A gas stove, which has a single burner's nominal heat input of ≤ 5.23 kW; b) Gas ovens and gas roasters, which have a nominal heat input of ≤ 5.82 kW; c) Freestanding gas cookers and independent hotplate and grills, whose nominal heat input meets the requirements of a) and b); d) Gas-fired rice cooker, which has a maximum rice volume for each stew ≤ 4 L AND a nominal heat input ≤ 4.19 kW; e) Gas-electric combined stoves, whose nominal heat input meets the requirements of a), b), d), AND whose total rated input power of electricity is ≤ 5.00 kW; f) The integration cooking appliance, whose nominal heat input meets the requirements of a) and e); g) Domestic outdoor gas barbecues (hereinafter referred to as gas barbecues), which is gas-supplied by a liquefied petroleum gas cylinder, with a charge of not more than 15 kg, AND has a total heat input of not greater than 35 kW.2 Normative referencesThe following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) is applicable to this standard. GB/T 191 Packaging - Pictorial marking for handling of goods GB/T 1019-2008 General requirements for the package of household and similar electrical appliances GB/T 1690-2010 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids GB/T 1740 Determination of resistance to heat and humidity of paint films GB/T 1765 Method of producing of paint films for testing heat and humidity resistance, salt-fog resistance and accelerated weathering GB/T 1771 Paints and varnishes - Determination of resistance to neutral salt spray (fog) GB/T 3768-2017 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane3 Terms and definitionsThe terms and definitions as defined in GB 4706.1 and GB 4706.22, as well as the following terms and definitions, apply to this document. Note. The terminology of AC power cooking appliances corresponds to the appliance terms, which are established in GB 4706.1, for example, cooking appliances corresponding to appliances, class I cooking appliances corresponding to class I appliances, class II cooking appliances corresponding to class II appliances, class III cooking appliances corresponding to class III appliances, electric heating stoves correspond to electric heating appliances, electric cookers correspond to electric appliances, combined cookers correspond to combined appliances.4 Product classification4.1 Types of gas cooking appliances Note. Gas cooking appliances are hereinafter referred to as cooking appliances. 4.2 The method of preparing the model of cooking appliances5 Requirements5.1 Basic design parameters 5.1.1 Refer to Table 1 for the nominal gas pressure in front of the stove. 5.1.2 Stoves using AC power supply. power supply conditions. single-phase rated voltage ≤ 250 V. 5.2 Performance 5.2.1 Air tightness The air tightness of stoves shall meet the following requirements. a) From the gas inlet to the gas valve, at a pressure of 4.2 kPa, the gas leakage is ≤ 0.07 L/h; b) For the automatic control valve, at a pressure of 4.2 kPa, the gas leakage is ≤ 0.55 L/h; c) When using the 0-1 gas to ignite from the gas inlet to the burner's fire hole, there is no leakage. 5.2.2 Heat input The heat input of stoves shall meet. 5.2.3 Combustion conditions The Combustion conditions of stoves shall meet the requirements of Table 2. 5.2.4 Temperature rise The temperature rise shall not exceed the value, which is shown in Table 3. 5.2.5 Maximum pressure rise of gas cylinder The maximum pressure rise in the gas cylinder shall meet the requirements of Table 4. 5.2.6 Resistance to thermal shock 5.2.6.1 The oven door and the observation window glass of the gas barbecue shall not be cracked, due to thermal shock. 5.2.6.2 The resistance to thermal shock of the tempered glass of the stove surface shall meet the requirements of CJ/T 157-2017. 5.2.6.3 The resistance to thermal shock of ceramic panels shall meet the requirements of CJ/T 305-2009. 5.2.6.4 The panel of non-metallic materials shall not splash after being broken, due to thermal shock. 5.2.7 Resistance to gravity shock 5.2.8 Safety device 5.3 Structure 5.3.1 General requirements of structure 5.3.1.1 The parts and components of stoves shall be safe and durable. They shall not be damaged or deformed in normal operation. 5.3.1.2 The stoves shall have sufficient stability during normal use. There shall be no sliding or tipping. 5.3.1.3 When the overall structure of the stove is tilted 15° in any direction, it will not tip over; the parts will not fall off. 5.3.1.4 The burners of stoves (excluding products for outdoor use, such as gas barbecues) shall be equipped with not less than two independent gas valves, as shown in Figure 1. a) In series connection b) Combination of series and parallel connections 5.3.1.9 For all types of stoves (excluding products for outdoor use, such as gas ovens), each burner shall be equipped with a flameout protection device. 5.3.1.10 When the knob is grasped in normal use, it shall be impossible for the operator's hand to touch those parts, with excessive temperature rise. 5.3.1.11 Asbestos shall not be used in the structure of stoves. 5.3.1.12 When the stove with a cover plate is in use, the cover plate shall not fall by itself. When the angle between the cover plate and the stove surface is less than 60°, the gas path shall be closed AND shall not be opened by itself. 5.3.2 Stove structure Use non-metallic materials for the panel. When the panel is broken, it shall meet the following requirements. a) The fragments must not splash; b) The cooking utensils do not topple over. 5.3.3 Roaster structure When placing a container on the vent of the roaster, it must not affect the exhaust of the flue gas. When the container cannot be placed, it shall be marked with text, where it is easy to see. 5.3.4 Oven structure 5.3.5 Rice cooker structure Boiled water cannot be poured on the automatic flameout device of the rice cooker. The automatic flameout device shall not overheat. 5.3.6 Structure of oven stove6 Test method6.1 Laboratory conditions 6.1.1 The room temperature is 20 °C ± 5 °C. The fluctuation of the room temperature during each test shall be less than 5 °C. Method for determining room temperature. Fix the temperature-sensing part of the thermometer, at approximately the same height as the upper end of the cooking appliance, at 1 m from the front, left, right of the cooking appliance, respectively, to measure the temperature of the above three points. Take the average value. 6.1.2 The ventilation is good. The carbon monoxide content in the indoor air shall be less than 0.002%. The carbon dioxide content shall be less than 0.2%. The horizontal air flow velocity, at 1 m around the tested cooking appliance, shall be ≤ 0.1 m/s. 6.1.3 Power supply conditions. AC power used in the laboratory. The voltage fluctuation range is within ±2%. 6.2 Test gas 6.2.1 The test gas's code is in accordance with the provisions of GB/T 13611, as shown in Table 10.During the test, the variation range of the net Wobbe number of the gas shall be within ±2%. The static pressure, when the cooking appliance stops running, shall be less than or equal to 1.25 times of the gas supply pressure when running. 6.2.4 The condition code for test gas is expressed as. test gas code - supply pressure code of test gas. Example. 0-2 means reference gas - nominal gas supply pressure. 6.3 Main instruments and meters used in the test The main instruments and meters used in the test are as shown in Table 12. 6.6 Air tightness test The air tightness test of the gas path is as shown in Table 14. 6.7 Heat input test The heat input test is as shown in Table 15. 6.10 Thermal shock test The thermal shock test is as shown in Table 20 6.11 Test of gravity shock resistance 6.12 Test of safety device The test of safety device is as shown in Table 21. 6.13 Test of electric ignition device 6.13.1 Test conditions. Use 0-1 gas and 0-3 gas. 6.13.2 Test state. 6.13.3 Test method. 6.14 Test of use performance 6.15.2 Test of AC power supply abnormality 6.15.2.4 Judgment. a) When the voltage sags and the short-term interruption time is less than or equal to 20 ms, the stove shall be in normal use state. b) When the voltage sags and the short-term interruption time is greater than 20 ms, the stove shall be in a safe protection state or a normal use state. 6.15.3 Test of DC power supply abnormality 6.15.3.1 Test conditions. Use 0-2 gas. 6.15.3.2 Test state. 15 min after the cooking appliance is ignited. 6.15.3.3 Test method. 6.16 Durability performance test 6.16.1 Gas cock 6.17 Vibration test For the stove with protective packaging, bundle it according to the transportation requirements. Place it horizontally on a vibrating machine. At a frequency of 10 Hz and a full amplitude of 5 mm, vibrate it for 30 minutes in each of the up and down and left and right directions. Then perform the test of the gas path's air tightness, electrical performance, use function. 6.18 Drop test The test is carried out according to the method in 5.9 of GB/T 1019-2008.The drop height is selected, according to the circulation condition 1 in Table 3 of GB/T 1019-2008.After the drop test, perform the test of gas tightness of the gas path and electrical performance. The electrical strength, leakage current, grounding resistance shall meet the requirements of 5.2. 6.19 Packaging pressure test The test method is in accordance with the provisions of GB/T 4857.3. 6.20 Requirement test of fume suction and exhaust device for integration cooking appliance 6.20.1 The requirements test of the fume suction and exhaust device of the integration cooking appliance shall be in accordance with the requirements of GB/T 17713-2011. 6.20.2 The noise of the cooking fume suction and exhaust device, when the integration cooking appliance operates separately Turn off the burner. Turn on the fume suction and exhaust device. Run it at the highest speed. According to the test method specified in 7.1.2 of GB/T 4214.1- 2017, use the calculation method of 8.6 in GB/T 4214.1-2017, to convert the sound pressure level noise, which is obtained through test, into the sound power level. 6.21 Structural test 6.21.1 General test Carry out the test by visual inspection, as specified in 5.3. 6.21.2 Tilt overturn test Place the stove horizontally on the test bench. Gradually tilt it to an angle of 15° with the horizontal plane. Visually check whether it is overturned AND whether the components on fire move and fall off. 6.21.3 Test of oven door's load 6.22 Material test 6.22.1 General test Carry out the test by visual inspection, according to 5.4. 6.22.2 Corrosion resistance test7 Marking, packaging7.1 Marking 7.1.1 Each cooking appliance shall be equipped with a nameplate, at an appropriate position; its marking content shall include. 7.1.2 In addition to the nameplate marks, the following marks shall also be included. a) The wiring terminals, which are used to connect to the power grid, shall be marked as follows. - The terminal, which is specifically connected to the neutral wire, shall be marked with the letter N; - The protective ground terminal shall be marked with a symbol. Note 1.These representation symbols cannot be placed on screws, removable washers, or other parts that can be removed during wire connection. b) Unless it is obviously not needed, for the switch that may cause danger during work, its marking or placement position shall clearly indicate which part of the stove it controls. Note 2.The marking method, which is used for this purpose, no matter where it is, it shall be understandable without knowledge of language or national standards. c) For different gear positions of the switch on the stove and the different gear positions of the controller on all stoves, they shall be marked with numbers, letters or other visual means. d) During installation or normal use, the controller intended to be adjusted shall be marked with the direction of adjustment. e) If compliance with this standard depends on the action of a replaceable hot melt or fuse, its designation or other identification as used to identify the fuse shall be marked at a visible position, when the cooking appliance is disassembled to the extent necessary to replace the fuse. Note 3.The marking on the fuse. It is allowed, as long as the mark is still clear, after the fuse actions. Note 4.The marks required by this standard are clear, easy to read and durable. Wipe the mark with a cloth, which is soaked in water, for 15 seconds; then wipe it with a cloth, which is soaked in gasoline, for 15 seconds, the mark is still clear and easy to read, the mark is not easy to remove and does not curl. f) If the surface of the electric stove is made of glass, ceramic or similar fragile materials, meanwhile the heating element is installed in or on the above materials, OR the main part of the enclosure of the live parts of the stove is made of the above materials, THEN, there shall be the following warning in the instructions for use AND on the stove. g) Other safety warning marks. Electric stoves and induction stoves shall have such markings as. High temperature and touching prohibited; do not close the cover when heating and just after heating, etc. 7.1.3 The marks on the packaging box shall include the following. 7.2 Packaging ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB 16410-2020 be delivered?Answer: The full copy PDF of English version of GB 16410-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB 16410-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB 16410-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 16410-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB 16410-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 16410-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB 16410-2020?A step-by-step guide to download PDF of GB 16410-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB 16410-2020". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
