Chinese Standard: 'YS/T 1010-2014'
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | Related Standard |
| YS/T 1010-2014 | English | 179 |
Add to Cart
|
Days<=3
|
Test method for ring tensile strength of sintered porous metal
| Valid |
YS/T 1010-2014
|
| YS/T 1010-2014 | Chinese | 16 |
Add to Cart
|
<=1-day
|
[PDF from Chinese Authority, or Standard Committee, or Publishing House]
| |
|
YS/T 1010-2014 -- Click to view similar PDF/Books...
Detail Information of YS/T 1010-2014; YS/T1010-2014
Description (Translated English): Test method for ring tensile strength of sintered porous metal
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H16
Classification of International Standard: 77.160
Word Count Estimation: 7,722
Date of Issue: 10/14/2014
Date of Implementation: 4/1/2015
Quoted Standard: GB/T 16825.1
Drafting Organization: Northwest Nonferrous Metal Research Institute
Administrative Organization: National non-ferrous metals Standardization Technical Committee
Regulation (derived from): People's Republic of China Ministry of Industry and Information Technology Notice 2014 No. 63; Industry Standard Filing Notice 2014 No. 12 (Overall No. 180)
Issuing agency(ies): Ministry of Industry and Information Technology of the People's Republic of China
Summary: This Standard specifies the method for determination of porous sintered metal material loop tensile strength. This Standard applies to powder metallurgy method of producing a porous sintered metal pipe.
YS/T 1010-2014
Test method for ring tensile strength of sintered porous metal
ICS 77.160
H16
People's Republic of China Nonferrous Metals Industry Standard
Determination of sintered porous metal material tensile strength of the ring
Issued on. 2014-10-14
2015-04-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard is in accordance with GB/T 1.1-2009 given rules drafted.
This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized.
This standard is drafted by. Northwest Nonferrous Metal Research Institute, Xi'an Pao PM limited liability company.
The main drafters of this standard. On Ping, Tang Huiping, Chen sister, Wangjian Yong, Yuan Ying, Wang Qiang soldiers, Yang Baojun.
Determination of sintered porous metal material tensile strength of the ring
1 Scope
This standard specifies the method for determination of porous sintered metal material ring pull strength.
This standard applies to the production of powder metallurgy sintered porous metal pipe.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
Inspection and tension and (or) pressure testing machine force measuring system. GB/T 16825.1 of static uniaxial testing machines - Part 1
calibration
Principle 3
On the porous sintered metal pipes take the ring-like, radial force is applied to the ring-like from the inside until the sample is pulled off, according to the tensile force and the cross-sectional area
The calculated strength is sintered tensile strength of the metal ring porous material.
4 Sample
4.1 sample is to be a ring, diameter size range should be 50mm ~ 100mm, wall thickness should be 1.0mm ~ 5.0mm, height should be
10mm ~ 20mm, see figure 1.
Millimeters
Explanation.
Φ0 --- porous sintered metal tube outer diameter;
e --- porous sintered metal tube wall thickness;
h --- highly porous sintered metal tube.
1 sintered metal porous pipe test specimens
4.2 may truncate the sample obtained from a longer pipe machining should be no oil, no internal and external scratches, cracks, burr-free surface.
|