| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 3373-2012 | English | 399 |
Add to Cart
|
3 days [Need to translate]
|
Rules for the inspection of knives for import and export. General requirements
| Obsolete |
SN/T 3373-2012
|
Standard similar to SN/T 3373-2012 SN/T 5268 Basic data | Standard ID | SN/T 3373-2012 (SN/T3373-2012) | | Description (Translated English) | Rules for the inspection of knives for import and export. General requirements | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Word Count Estimation | 10,119 | | Quoted Standard | GB/T 2828.1-2003; JB/T 10231.1-2001; SN/T 0002 | | Regulation (derived from) | National Quality Inspection (2012) 777; industry standard filing Notice 2013 No. 4 (No. 160 overall) | | Issuing agency(ies) | General Administration of Customs | | Summary | This standard specifies the import and export of cutlery products inspection programs, sampling programs and decision rules. This standard applies to the import and export of cutting machining class test. | SN/T 3373-2012: Rules for the inspection of knives for import and export. General requirements---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rules for the inspection of knives for import and export.General requirements
People's Republic of China Entry-Exit Inspection and Quarantine Standards
General requirements for the inspection of import and export cutting tools
Issued on. 2012-12-12
2013-07-01 implementation
People's Republic of China
The State Administration of Quality Supervision, Inspection and Quarantine released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard is proposed and managed by the National Certification and Accreditation Administration Committee.
This standard was drafted. Shaanxi People's Republic of China Entry-Exit Inspection and Quarantine of Jilin People's Republic of China
Bureau, Shaanxi aviation Carbide Tool Company.
The main drafters of this standard. Yang Qiaolian, Kang Li, Bai Xuemei, Yan Zheng, Liya Ting.
General requirements for the inspection of import and export cutting tools
1 Scope
This standard specifies the test items the import and export of products and cutting tools, sampling plans and decision rules.
This standard applies to the class of machining cutting tools import and export inspection.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample
plan
JB/T 10231.1-2001 tool inspection methods - Part 1. General
The basic provisions of SN/T 0002 Electromechanical Import and Export Commodity Inspection procedures prepared
3 Terms and Definitions
SN/T 0002 defined by the following terms and definitions apply to this document.
3.1
Inspection Lot inspectionlot
To implement the same type of sampling and pooled (may contain multiple specifications), under the same conditions of production per unit of product produced is called the subject
Test batch.
3.2
Representative specifications representativespecifcation
In an inspection lot determined on behalf of the inspection lot quality product specifications.
3.3
Representative sample representativesample
In a representative sample specifications drawn.
4 test
4.1 Inspection classification
Inspection is divided into type test and sampling test batch by batch.
4.2 Sampling
4.2.1 Sampling
Samples should be qualified by the factory inspection, packaging and storage of finished stacking neatly drawn.
|