|
US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 2638.4-2013: Determination of sulfur content in manganese ores for import and export. High frequency combustion with infrared absorption method
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 2638.4-2013 | English | 209 |
Add to Cart
|
3 days [Need to translate]
|
Determination of sulfur content in manganese ores for import and export. High frequency combustion with infrared absorption method
| Valid |
SN/T 2638.4-2013
|
PDF similar to SN/T 2638.4-2013
Basic data | Standard ID | SN/T 2638.4-2013 (SN/T2638.4-2013) | | Description (Translated English) | Determination of sulfur content in manganese ores for import and export. High frequency combustion with infrared absorption method | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | D32 | | Classification of International Standard | 73.060.20 | | Word Count Estimation | 8,850 | | Quoted Standard | GB/T 6682; GB/T 14949.8 | | Regulation (derived from) | National quality recognition (2013), No. 464; industry standard filing Notice No. 1 of 2014 (No. 169 overall) | | Issuing agency(ies) | General Administration of Customs | | Summary | This standard specifies the use of a high frequency induction furnace combustion infrared absorption method for determination of manganese ore in sulfur content. This standard applies to the determination of the sulfur content of manganese ore. Measuremen | SN/T 2638.4-2013: Determination of sulfur content in manganese ores for import and export. High frequency combustion with infrared absorption method
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Determination of sulfur content in manganese ores for import and export.High frequency combustion with infrared absorption method
People's Republic of China Entry-Exit Inspection and Quarantine Standards
Determination of manganese ore and export sulfur content
High frequency induction furnace combustion infrared absorption method
Issued on. 2013-08-30
2014-03-01 implementation
People's Republic of China
The State Administration of Quality Supervision, Inspection and Quarantine released
Foreword
SN/T 2638 is divided into four parts.
--- Part 1. Determination of the wavelength of the import and export of manganese ores, iron, silicon, aluminum, calcium, magnesium, titanium, potassium and phosphorus elemental dispersive X-ray fluorescence
Optical spectroscopy;
--- Part 2. Import-export manganese ore of iron, measured inductance aluminum, magnesium, calcium, titanium, phosphorus, nickel, copper, zinc coupled plasma atomic hair
Emission spectrometry;
--- Part 3. Determination of manganese ore and export high-temperature sulfur content of combustion infrared absorption method;
--- Part 4. Determination of manganese ore and export of sulfur content in the high-frequency induction furnace combustion infrared absorption method.
This section SN/T 2638 Part 4.
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard is proposed and managed by the National Certification and Accreditation Administration Committee.
This standard was drafted. People's Republic of China Liaoning Entry-Exit Inspection and Quarantine Bureau.
The main drafters of this standard. Jiang Xiaoguang, Zhang Yanfu, Li Weigang, Song Chenggang, Wang Xiuying, Li Changli.
Determination of manganese ore and export sulfur content
High frequency induction furnace combustion infrared absorption method
1 Scope
This standard specifies the use of a high frequency induction furnace combustion infrared absorption method for determination of manganese ore sulfur content.
This standard applies to the determination of manganese ore sulfur content. Measuring range. w (S). 0.0010% ~ 0.50%.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
Laboratory use specifications and test methods GB/T 6682 Analysis
GB/T 14949.8 wet chemical analysis of manganese ore deposit measuring water
3 Method summary
The sample is heated in an induction furnace in an oxygen stream of combustion, the oxygen produced by the sulfur dioxide contained in the measuring chamber to the infrared analyzer dioxide
Sulfur absorption of a specific wavelength of infrared energy absorbed is proportional to its concentration can, according to the detector to accept the change in energy can be measured sulfur content.
4 Reagents
Unless otherwise stated, all reagents were of analytical grade, water as a secondary water GB/T 6682 regulations.
4.1 anhydrous magnesium perchlorate. particle size 0.7mm ~ 1.2mm.
4.2 Alkali Asbestos. granular.
4.3 tungsten tin flux. pure tungsten (sulfur content of less than 0.0005%) and tin powder (sulfur content of less than 0.0005%), 6-4 mixing.
Iron 4.4 Flux. a sulfur content of less than 0.0005%.
4.5 tin capsules. capacity of about 0.4mL.
4.6 high-purity potassium. content greater than 99.9%, and dried before use at 105 ℃ 2h, placed in a desiccator to cool.
4.7 Manganese ore reference materials. certified reference materials.
4.8 Oxygen. than 99.5% purity.
4.9 Power gas. nitrogen, argon or compressed air, which contaminants (oil and water) content of less than 0.5%.
5 Instruments
5.1 frequency induction infrared carbon and sulfur analyzer.
5.2 porcelain crucible. a precise assembly dimensions, adapted to support a column so that it can be raised to the exact height of the induction coil. And at 1200 ℃
Burning oxygen-enriched atmosphere at 2h, stored in a desiccator.
5.3 Analysis of balance. a sense of the amount of 0.1mg.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 2638.4-2013_English be delivered?Answer: Upon your order, we will start to translate SN/T 2638.4-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of SN/T 2638.4-2013_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 2638.4-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|