|
US$499.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 2447.2-2010: General requirements of inspection on electrical and mechanical products for import and export. Part 2: Risk assessment
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 2447.2-2010 | English | 499 |
Add to Cart
|
4 days [Need to translate]
|
General requirements of inspection on electrical and mechanical products for import and export. Part 2: Risk assessment
| Valid |
SN/T 2447.2-2010
|
PDF similar to SN/T 2447.2-2010
Basic data | Standard ID | SN/T 2447.2-2010 (SN/T2447.2-2010) | | Description (Translated English) | General requirements of inspection on electrical and mechanical products for import and export. Part 2: Risk assessment | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | J00 | | Classification of International Standard | 01.120 | | Word Count Estimation | 19,134 | | Date of Issue | 2010-11-01 | | Date of Implementation | 2011-05-01 | | Regulation (derived from) | National Quality Inspection (2010) 582 | | Issuing agency(ies) | General Administration of Customs | | Summary | This standard specifies requirements for various types of mechanical and electrical products import and export inspection and assessment of the risk analysis principles and procedures. This standard applies to the import and export of electromechanical products inspection risk assessment, risk management activities for the relevant information and evidence. | SN/T 2447.2-2010: General requirements of inspection on electrical and mechanical products for import and export. Part 2: Risk assessment
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General requirements of inspection on electrical and mechanical products for import and export.Part 2. Risk assessment
People's Republic of China Entry-Exit Inspection and Quarantine Standards
Import and export of electromechanical products inspection
Professional General requirements
Part 2. Risk Assessment
Part 2. Riskassessment
Issued on. 2010-11-01
2011-05-01 implementation
People's Republic of China
The State Administration of Quality Supervision, Inspection and Quarantine released
Foreword
SN/T 2447 into the following sections.
--- Part 1. Standard system;
--- Part 2. Risk Assessment.
This section SN/T Section 22447 of.
This section proposed and managed by the National Certification and Accreditation Administration Committee.
This section is drafted. SZCIQ.
The main drafters of this section. Xu Beibei, Zehua Chen Zhao Peng, Li, Lu Wen Jun.
This section first release of exit inspection and quarantine industry standards.
Introduction
"Import and export of electromechanical products testing professional General requirements - Part 2. Risk Assessment" is a standard system of inspection and quarantine of the second layer (electrical and mechanical inspection
Professional standards inspection system of the first layer) --- professional generic.
This part can be used as guidelines for inspection and risk assessment work to develop and implement policies to raise the import and export of electromechanical products inspection and risk management
For information and infrastructure.
In drafting this section assumes that by appropriately qualified and experienced people to use this guide.
Import and export of electromechanical products inspection
Professional General requirements
Part 2. Risk Assessment
1 Scope
This section sets out the principles and procedures to test the risk of various types of import and export of electromechanical products were analyzed and assessed.
This section applies to the import and export of electromechanical products inspection risk assessment, provide the basis for information and related risk management activities.
2 Terms and definitions
The following terms and definitions apply to this section.
2.1
Risk risk
Import and export of electromechanical products inspection activities, the possibility of product safety, health, environmental protection, anti-fraud and other incidents and their consequences
The combination. It should be considered relevant laws and regulations, social, economic and environmental factors.
Note. This guide is based on risk management and implementation of the inspection personnel competent premise, does not consider the risk caused by such persons.
2.2
Risk management riskmanagement
Risk identification, analysis, evaluation, exchange, processing, monitoring and assessment, in order to adjust the system process risk, usually by the decision-making bodies
get on.
Within the meaning of this, the relationship between risk management and its basic link shown in Figure 1.
1 basic aspects of risk management diagram
Note. The risk of the deal is to take appropriate measures to adjust the risk process; risk communication means information between risk managers and stakeholders of risk
communicate with. Risk management and risk communication and monitoring outside the scope of this section.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 2447.2-2010_English be delivered?Answer: Upon your order, we will start to translate SN/T 2447.2-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of SN/T 2447.2-2010_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 2447.2-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|