|
US$389.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 2001.1-2006: Determination of certain hazardous in electrical and electronic equipment. Mechanical disjointment. Part 1: General requirements
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 2001.1-2006 | English | 389 |
Add to Cart
|
3 days [Need to translate]
|
Determination of certain hazardous in electrical and electronic equipment. Mechanical disjointment. Part 1: General requirements
| Valid |
SN/T 2001.1-2006
|
PDF similar to SN/T 2001.1-2006
Basic data | Standard ID | SN/T 2001.1-2006 (SN/T2001.1-2006) | | Description (Translated English) | Determination of certain hazardous in electrical and electronic equipment. Mechanical disjointment. Part 1: General requirements | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | G04;L04 | | Classification of International Standard | 71.040; 31.020 | | Word Count Estimation | 12,183 | | Date of Issue | 2006-06-29 | | Date of Implementation | 2007-01-01 | | Quoted Standard | SN/T 2000 | | Regulation (derived from) | ?National-accreditation-Science [2010] 50 | | Issuing agency(ies) | General Administration of Customs | | Summary | This standard specifies the electrical and electronic products to all kinds of mechanical splitting homogeneous materials or test methods and requirements for units for the determination of hazardous substances. This standard applies to the design rated voltage not exceeding 1000V, 1500V DC does not exceed the electrical and electronic products (including parts and components) mechanical split. The products covered in this section include, but are not limited to the following categories: Large household appliances, small household appliances, IT and telecommunications equipment, audio and video equipment, lighting equipment, Electronics and Electrical Tools (except for large-size specific industrial tools), Toys, leisure and sports equipment, vending machines. | SN/T 2001.1-2006: Determination of certain hazardous in electrical and electronic equipment. Mechanical disjointment. Part 1: General requirements
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Determination of certain hazardous in electrical and electronic equipment.Mechanical disjointment.Part 1. General requirements
Book of the People's Republic of China Entry and Exit Inspection and Quarantine
Detection of toxic and hazardous substances in electrical and electronic products
Mechanical separation - Part 1. General requirements
Released on June 26,.2006
2007-01-01 implementation
People's Republic
The General Administration of Quality Supervision, Inspection and Quarantine issued
Content
Foreword I
Introduction II
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Split principle 2
5 split program 2
6 sampling 3
7 Other requirements 4
Appendix A (informative) Circuit board assembly split diagram 5
Appendix B (informative) Example of splitting small components 6
Appendix C (informative) Risk Area List 7
Foreword
This part is the first part of SN/T 2001.
Appendix A, Appendix B and Appendix C of this part are informative annexes.
This part is proposed and managed by the National Certification and Accreditation Administration.
This part is drafted by the Zhejiang Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, Shenzhen Entry-Exit Inspection and Quarantine
Bureau, Jiangsu Entry-Exit Inspection and Quarantine Bureau, Guangdong Entry-Exit Inspection and Quarantine Bureau, Ningbo Entry-Exit Inspection and Quarantine Bureau, Shanghai Entry-Exit Inspection and Quarantine Bureau,
The Shenyang Entry-Exit Inspection and Quarantine Bureau and the Jilin Entry-Exit Inspection and Quarantine Bureau participated in the drafting.
The main drafters of this section. Zhou Min, He Chonghui, Xiao Qian, Wu Yulan, Chen Jianguo, Xu Wei, Li Zhuofu, Wang Chun, Sun Weiwei, Xie Jinxiong,
Zhang Xu, Xiong Ying, Hong Ying.
This section is the first industry standard for entry-exit inspection and quarantine.
Introduction
For chemical analysis, obtaining a homogeneous test sample is a necessary condition for testing. This section also attempts to reach the submission of chemical tests.
The sample is for the purpose of homogenization, and the necessary mechanical separation of the electrical and electronic products is appropriately regulated.
As we all know, the manufacturing process, structure and materials of electrical and electronic products are more complicated, often a variety of materials are glued together, components and component structures.
Into complex, especially various electronic components and components, structures and materials are very special, if you want to obtain homogeneous materials, the most direct way
It is to use mechanical tools to remove. However, there are many factors that affect the acquisition of a single material or a homogeneous material, such as tools, environments, and methods.
Different, it will affect the acquisition of homogeneous materials, which will affect the accuracy of chemical testing and the overall evaluation of product compliance.
This section specifies the process of mechanical splitting methods that can be implemented for the diversity of electrical and electronic products and the complexity of materials and components.
Ensure that mis-judgment of toxic and hazardous substances present in the product is not caused by improper separation.
Detection of toxic and hazardous substances in electrical and electronic products
Mechanical separation - Part 1. General requirements
1 Scope
This section specifies the methods and requirements for the mechanical separation of electrical and electronic products into various homogeneous materials or detection units for hazardous substances.
Determination.
This part is applicable to the design of electrical and electronic products (including components with rated voltage AC not exceeding 1000V and DC not exceeding 1500V).
Mechanical splitting of components and components).
The products covered in this section include, but are not limited to, the following categories.
---Large household appliances;
---Small household appliances;
---Information technology and communication equipment;
--- audio and video equipment;
---lighting device;
---Electronic and electrical tools (except for large size specific industrial appliances);
---Toys, amusement and sports equipment;
---vending machine.
2 Normative references
The terms in the following documents become the provisions of this part by reference to this part of SN/T 2001. Quotations with dated
, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved under this section
The parties to the agreement study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this
section.
SN/T 2000 General rules for the detection of toxic and hazardous substances in electrical and electronic products
3 Terms and definitions
The following terms and definitions identified by SN/T 2000 apply to this section.
3.1
The product or its parts are broken down into test units using mechanical methods such as unscrewing, cutting, scraping, squeezing and grinding. In this section
In the short term "split".
3.2
After splitting and sampling, the material that is ultimately submitted for chemical analysis is required. According to the uniformity of the material, the detection unit can be divided into homogeneous detection sheets.
Meta and heterogeneous detection unit.
3.3
A detection unit that is uniformly composed of one or more substances and can no longer be mechanically separated out of different materials.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 2001.1-2006_English be delivered?Answer: Upon your order, we will start to translate SN/T 2001.1-2006_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of SN/T 2001.1-2006_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 2001.1-2006_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|