|
US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 1657.3-2014: Rules for the inspection of motor-operated electric tools for import and export. Part 3: Hand-held electric planers
Status: Valid SN/T 1657.3: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 1657.3-2014 | English | 209 |
Add to Cart
|
3 days [Need to translate]
|
Rules for the inspection of motor-operated electric tools for import and export. Part 3: Hand-held electric planers
| Valid |
SN/T 1657.3-2014
|
| SN/T 1657.3-2006 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Part 3: of the import and export of power tools for the inspection of the handheld planer
| Obsolete |
SN/T 1657.3-2006
|
PDF similar to SN/T 1657.3-2014
Basic data | Standard ID | SN/T 1657.3-2014 (SN/T1657.3-2014) | | Description (Translated English) | Rules for the inspection of motor-operated electric tools for import and export. Part 3: Hand-held electric planers | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | K64 | | Classification of International Standard | 25.140.20 | | Word Count Estimation | 8,888 | | Older Standard (superseded by this standard) | SN/T 1657.3-2006 | | Quoted Standard | GB/T 2828.1-2003; GB 3883.1-2008; GB 3883.10-2007; GB 4343.1; GB 17625.1; SN/T 0002.1 | | Regulation (derived from) | AQSIQ notification issued in 2014 on the first batch of 230 industry-standard entry-exit inspection and quarantine | | Issuing agency(ies) | General Administration of Customs | | Summary | This standard specifies the import and export of hand-held planer (hereinafter referred to as planer) sampling, testing and the results of determination. Import and export inspection This standard applies to hand-held planing of wood used, the rated volta | SN/T 1657.3-2014: Rules for the inspection of motor-operated electric tools for import and export. Part 3: Hand-held electric planers
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Inspection of import and export electric tools - Part 3. Hand-held planer)
People's Republic of China Entry-Exit Inspection and Quarantine Standards
Instead of the SN/T 1657.3-2006
Power tools for the inspection of import and export
Part 3. Hand-held planer
export-Part 3. Hand-heldelectricplaners
Issued on. 2014-01-13
2014-08-01 implementation
People's Republic of China
The State Administration of Quality Supervision, Inspection and Quarantine released
Foreword
SN/T 1657 "for the inspection of import and export of power tools" is divided into 13 parts.
--- Part 1. General requirements;
--- Part 2. electric chain saws;
--- Part 3. handheld planer;
--- Part 4. Isolation and counting;
--- Part 5. hand-held power for routers and hand-held electric trimmer;
--- Part 6. Pressure Washer;
--- Part 7. profile cutting machine;
--- Part 8. stone cutting machine;
--- Part 9. Circular saw;
--- Part 10. hammer;
--- Part 11. Drills and impact drills;
--- Part 12. Portable circular saws;
--- Part 13. Portable band saw.
This section SN/T 1657 Part 3.
This section drafted in accordance with GB/T 1.1-2009 given rules.
Some of this section may involve patents. This part of the release mechanism does not assume the responsibility to identify these patents.
Since the implementation date of this part of the place of SN/T 1657.3-2006 "the inspection of import and export electric tools - Part 3. Hand-held planer
Particular requirements. "
This section compared with the SN/T 1657.3-2006 The main changes are as follows.
--- Chapter 2 refers to the latest version of the standard, an increase of about electromagnetic compatibility standards.
--- Chapter 4 adds "electromagnetic compatibility" and "environmental protection, energy efficiency, performance" requirements.
--- Increase in Chapter 5, "electromagnetic compatibility testing" and "environmental protection, energy efficiency, performance testing" requirement; add "single card check" inspection requirements.
--- Taking into account the actual situation and the latest version of the standard inspection and supervision work, the inspection content, requirements and test methods have been
modify.
This section proposed and managed by the National Certification and Accreditation Administration Committee.
This section was drafted by. People's Republic of China Jiangsu Entry-Exit Inspection and Quarantine Bureau.
The main drafters of this section. cold Yu, Lu Quanlong, Zhou Yongchang, Song Lei, Tang and red, Lu Han, attentive.
This part of the standard replaces the previous editions are.
--- SN/T 1657.3-2006.
Power tools for the inspection of import and export
Part 3. Hand-held planer
1 Scope
SN/T 1657 provisions of this part of the import and export of hand-held planer (hereinafter referred to as planer) sampling, testing and the results of determination.
This section applies to hand-held planing wood with a voltage rating less than 250V single-phase AC or DC planing of import and export inspection.
This section does not apply to product testing.
--- Hand-held tool for use in explosive environments (dust, vapor or gas); and
--- Preparation and processing of food hand-held tool;
--- Medical hand-held tool (IEC 60601);
--- GB 4706.41 portable heating tools and similar appliances covered by special request.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2828.1-2003 Sampling procedures for inspection - Part 1 by receiving quality limit (AQL) retrieval batch inspection sampling plan
The first part of the GB 3883.1-2008 Safety hand-held power tools. General requirements
The second part of the GB 3883.10-2007 Safety hand-held power tools. Particular requirements for planers
GB 4343.1 EMC household appliances, electric tools and similar apparatus - Part 1. Emission
GB 17625.1 Electromagnetic Compatibility Limits for harmonic current emissions (equipment input current ≤16A)
The basic provisions of SN/T 0002.1 Electromechanical Import and Export Commodity Inspection procedures prepared
3 Terms and Definitions
GB 3883.1, GB 3883.10, SN/T 0002.1 and define the following terms and definitions apply to this document.
3.1
Sampling mode modeofsamplinginspection
According to the mandatory requirements of national technical specifications, batch import and export commodities or pumping grant implementation sampling, testing and inspection of conformity assessment activities.
3.2
Type Test mode modeoftypetest
According to a predetermined cycle based on the mandatory requirements of national technical specifications type testing, according to on-site inspection requirements for product pumping batch inspection
Inspection, supervision and implementation of the conformity assessment activities of the enterprise quality management system.
3.3
Compliance Verification mode modeofcomplianceverification
According to the mandatory requirements of national technical specifications, inspection certificate and inspection documents, goods are consistent with the random testing can be carried out when necessary, and real
Shi conformity assessment activities supervision.
3.4
Inspection Lot inspectionlot
To carry out the inspection and collection of the same specifications, models, produced under the same conditions of production per unit of product, referred to as batch.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 1657.3-2014_English be delivered?Answer: Upon your order, we will start to translate SN/T 1657.3-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of SN/T 1657.3-2014_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 1657.3-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version SN/T 1657.3-2014?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version SN/T 1657.3-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|