|
US$319.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 1657.10-2013: Rules for the inspection of motor-operated electric tools for import and export. Part 10: Hammers
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 1657.10-2013 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Rules for the inspection of motor-operated electric tools for import and export. Part 10: Hammers
| Valid |
SN/T 1657.10-2013
|
PDF similar to SN/T 1657.10-2013
Basic data | Standard ID | SN/T 1657.10-2013 (SN/T1657.10-2013) | | Description (Translated English) | Rules for the inspection of motor-operated electric tools for import and export. Part 10: Hammers | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | K64 | | Classification of International Standard | 25.140.20 | | Word Count Estimation | 12,175 | | Older Standard (superseded by this standard) | SN/T 0733.2-1997 | | Quoted Standard | GB/T 2828.1; GB 3883.1-2008; GB 3883.7-2012; GB 4343.1; GB 17625.1; SN/T 0002.1 | | Regulation (derived from) | National quality recognition (2013) 569 | | Issuing agency(ies) | General Administration of Customs | | Summary | This standard specifies the import and export of hammer sampling, testing and the results of the determination. This standard applies to the environmental conditions in general, concrete, rock, brick and similar materials drilling, grooving, cutting hair | SN/T 1657.10-2013: Rules for the inspection of motor-operated electric tools for import and export. Part 10: Hammers
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rules for the inspection of motor-operated electric tools for import and export.Part 10. Hammers
People's Republic of China Entry-Exit Inspection and Quarantine Standards
Instead of the SN/T 0733.2-1997
Power tools for the inspection of import and export
Part 10. Hammer
Part 10. Hammers
Issued on. 2013-11-06
2014-06-01 implementation
People's Republic of China
The State Administration of Quality Supervision, Inspection and Quarantine released
Foreword
SN/T 1657 "for the inspection of import and export of power tools" is divided into 11 parts.
--- Part 1. General requirements;
--- Part 2. electric chain saws;
--- Part 3. handheld planer;
--- Part 4. Isolation and counting;
--- Part 5. hand-held power for routers and hand-held electric trimmer;
--- Part 6. Pressure Washer;
--- Part 7. profile cutting machine;
--- Part 8. stone cutting machine;
--- Part 9. Circular saw;
--- Part 10. hammer;
--- Part 11. Drills and impact drills.
This section SN/T 1657 Part 10.
This section drafted in accordance with GB/T 1.1-2009 given rules.
The partial replacement of SN/T 0733.2-1997 "export of hand-held electric tools hammer for the inspection."
This section compared with the SN/T 0733.2-1997, the main technical changes are as follows.
--- Standard name has been adjusted by the "export of hand-held electric tools hammer for the inspection" to "check the import and export of power tools
Section 10 inspection procedures. hammer ";
--- For re-defines the scope of application;
--- Added some terms and definitions;
--- Increasing the overall requirements;
--- Taking into account the actual situation of inspection and supervision work for the test mode and test methods were adjusted and modified;
--- The inspection of the project, the content and requirements of the adjustments and additions;
--- Disposal of test results has been modified.
Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.
This section proposed and managed by the National Certification and Accreditation Administration Committee.
This section was drafted by. People's Republic of China Jilin Exit Inspection and Quarantine.
The main drafters of this section. Wang Zhaohui, Wang Wei.
This part of the standard replaces the previous editions are.
--- SN/T 0733.2-1997.
Introduction
"Import and export of power tools for the inspection," the import and export power tool inspection work in accordance with the import and export of power tools serve to guide inspection
And normative role.
With China's accession to the World Trade Organization (WTO) and the revised "People's Republic of China Import and Export Commodity Inspection Law" Import and Export Commodity Inspection
Test mode has undergone great changes, and changes in order to adapt to the situation, the state department in charge of inspection and quarantine inspection and quarantine standards organization established
system.
This part belongs to the inspection and quarantine standards of the fourth layer (mechanical and electrical test Standard System Layer) --- personality criteria for the hammer
Characteristics, provides for a special inspection requirements for import and export hammer.
Power tools for the inspection of import and export
Part 10. Hammer
1 Scope
SN/T 1657 This section provides the import and export of hammer sampling, testing and the results of determination.
This section applies to general environmental conditions, concrete, rock, brick and similar materials drilling, grooving, cutting hair and other operations of the single-phase
SACS import and export inspection rotary hammer.
This section does not apply to.
--- Hand-held tool for use in explosive environments (dust, vapor or gas); and
--- GB 3883.7-2012 defined hammer and hammer drill.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan
(ISO 2859-1.1999, IDT)
GB 3883.1-2008 safety first part of hand-held power tools. General requirements (IEC 60745-1.2006Ed4.0, IDT)
Tool requirements for hammers (IEC 60745-2-6.. - Safety - Part 2 GB 3883.7-2012 handheld power tool 2008
Ed2.2, IDT)
GB 4343.1 EMC household appliances, electric tools and similar apparatus - Part 1. emission (CISPR14-1, IDT)
GB 17625.1 Electromagnetic Compatibility Limits for harmonic current emissions (equipment input current ≤16A) (IEC 61000-3-2,
IDT)
The basic provisions of SN/T 0002.1 inspection of import and export of electromechanical products prepared
3 Terms and Definitions
SN/T 0002.1, GB 3883.1 and GB 3883.7 and define the following terms and definitions apply to this document.
3.1
Hammer hammers
Driven by a motor, a specially designed for tools such as concrete, rock, brick and similar materials drilling, grooving, cutting hair and other operations.
3.2
Type Test mode modeoftypetest
According to a predetermined cycle based on the mandatory requirements of national technical specifications type testing, according to on-site inspection requirements for product pumping batch inspection
Inspection, supervision and implementation of the conformity assessment activities of the enterprise quality management system.
3.3
Sampling mode modeofsamplinginspection
According to the mandatory requirements of national technical specifications, batch import and export commodities or pumping batch conformity assessment sampling, testing and inspection
activity.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 1657.10-2013_English be delivered?Answer: Upon your order, we will start to translate SN/T 1657.10-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of SN/T 1657.10-2013_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 1657.10-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|