| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 0002.3-2013 | English | 639 |
Add to Cart
|
3 days [Need to translate]
|
General stipulations for drafting of rules for inspection of export mechanical and electrical products
| Obsolete |
SN/T 0002.3-2013
|
PDF similar to SN/T 0002.3-2013
Basic data | Standard ID | SN/T 0002.3-2013 (SN/T0002.3-2013) | | Description (Translated English) | General stipulations for drafting of rules for inspection of export mechanical and electrical products | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | A00 | | Word Count Estimation | 16,121 | | Regulation (derived from) | National quality recognition (2013) 569 | | Issuing agency(ies) | General Administration of Customs | SN/T 0002.3-2013: General stipulations for drafting of rules for inspection of export mechanical and electrical products
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Exports of electromechanical products inspection procedures written - basic requirements)
People's Republic of China Entry-Exit Inspection and Quarantine Standards
Basic provisions for the inspection of exports of electromechanical products prepared
Issued on. 2013-11-06
2014-06-01 implementation
People's Republic of China
The State Administration of Quality Supervision, Inspection and Quarantine released
Foreword
SN/T 0002 is divided into three parts.
--- Part 1. mechanical and electrical products import and export inspection procedures prepared by the basic provisions;
--- Part 2. mechanical and electrical products import and export standard test method to prepare basic provisions;
--- Part 3. export of electromechanical products to prepare for the inspection of basic provisions.
This section SN/T 0002 Part 3.
This section based on GB/T 1.1-2009 given rule drafting.
Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.
This section proposed and managed by the National Certification and Accreditation Administration Committee.
This section was drafted by. People's Republic of China, Shenzhen Entry-Exit Inspection and Quarantine Fujian People's Republic of China
Bureau of Shenzhen Inspection and Quarantine Science Research Institute.
The main drafters of this section. Xu Beibei, Lin Miao, Ma Jingjing, Chen Huaping, Qin Jian.
Basic provisions for the inspection of exports of electromechanical products prepared
1 Scope
SN/T 000.2 of this section sets out the basic requirements for the export of electromechanical products inspection regulations (hereinafter referred to as the inspection of) the preparation, structure,
Format, write sequence, content, drafting and presentation methods.
This section applies to exports of electromechanical products for the inspection of the preparation.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1.1-2009 for standardization - Part 1. Standard structure and drafting
GB/T 20000.2-2009 Standardization Guide Part 2. The use of international standards
GB/T 20000.3-2003 Standardization Guide Part 3. references
SN/T 2447.1-2010 inspection Professional import and export of electromechanical products General requirements - Part 1. Standard System
SN/T 2755.1 industrial products export enterprise management - Part 1. General requirements
SN/T 2755.2 industrial products export enterprise management Part 2. Enterprise Category Basic requirements
SN/T 2755.3 industrial products export enterprise management - Part 3. Product Risk Rating basic requirements
SN/T 2755.4 industrial products export enterprise management - Part 4. Test the basic requirements of regulation
3 Terms and Definitions
GB/T 1.1-2009 and SN/T 2755.1 and define the following terms and definitions apply to this document.
3.1
Inspection and supervision methods meansofinspectionandadministration
Prescribed by the state inspection and quarantine departments for import and export goods inspection, product production enterprises conduct of supervision and management.
3.2
Test methods modeofinspection
Different ways to import and export products to test, such as the full inspection, sampling, type testing.
3.3
Test methods meansofinspection
The method according to the technical requirements of the standard and the implementation of specific inspection of the product, such as visual inspection, measurement and testing.
3.4
Consistency check conformityinspection
Seized batches of the product in terms of principle, structure, materials, and other key components already type testing, periodic testing, special test
Verify the consistency of the product carried.
3.5
Inspection batch declarationbatch
In the same way the inspection and quarantine inspection agency declaration of export of the same exports.
|