|
US$209.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
LY/T 1796-2008: Safety requirements for drum chipper
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| LY/T 1796-2008 | English | 209 |
Add to Cart
|
3 days [Need to translate]
|
Safety requirements for drum chipper
| |
LY/T 1796-2008
|
PDF similar to LY/T 1796-2008
Basic data | Standard ID | LY/T 1796-2008 (LY/T1796-2008) | | Description (Translated English) | Safety requirements for drum chipper | | Sector / Industry | Forestry Industry Standard (Recommended) | | Classification of Chinese Standard | B97 | | Classification of International Standard | 79.120.99 | | Word Count Estimation | 6,682 | | Date of Issue | 2008-09-03 | | Date of Implementation | 2008-12-01 | | Quoted Standard | GB 2893; GB 2894; GB/T 3766; GB 5226.1; GB/T 9239.1; GB/T 18262; GB/T 18514; JB/T 9953 | | Regulation (derived from) | Industry standard filing Notice No. 10 of 2008 | | Issuing agency(ies) | State Forestry Administration | | Summary | This standard specifies the drum chipper safety requirements and determination. This standard applies to all drum chipper. | LY/T 1796-2008: Safety requirements for drum chipper---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Safety requirements for drum chipper
ICS 79.120.99
B97
People's Republic of China Forestry Industry Standard
Drum chipper safety requirements
Released on.2008-09-03
2008-12-01 implementation
State Forestry Administration released
Foreword
This standard is proposed and managed by the National Technical Committee for Wood-based Panel Machinery Standardization.
This standard was drafted. Suzhou Sufu Ma Machinery Co., Ltd.
The main drafters of this standard. Hong Weijian, Yan Tiebing, Tang Qi.
Drum chipper safety requirements
1 Scope
This standard specifies the safety requirements and judgments of the drum chipper.
This standard applies to all drum chippers.
2 Normative references
The terms in the following documents become the terms of this standard by reference in this standard. Any dated reference document, followed by
Some amendments (not including errata content) or revisions do not apply to this standard. However, parties to agreements based on this standard are encouraged to
Whether the latest version of these files can be used. For undated references, the latest edition applies to this standard.
GB 2893 security color
GB 2894 safety sign
GB/T 3766 hydraulic system general technical conditions (GB/T 3766-2001, eqv ISO 4413.1998)
GB 5226.1 Mechanical safety machinery and electrical equipment - Part 1. General technical conditions (GB 5226.1-2002, IEC 60204-1.
2000, IDT)
GB/T 9239.1 Mechanical vibration constant (rigid) rotor balance quality requirements - Part 1
(GB/T 9239.1-2006, ISO 1940-1.2003, IDT)
General technical conditions for GB/T 18262 wood-based panel machinery
GB/T 18514 wood-based panel machinery safety rules
JB/T 9953 Woodworking Machine Noise Acoustic (Pressure) Level Measurement Method
3 requirements
3.1 General requirements
3.1.1 The safety of the drum chipper shall comply with the provisions of this standard and shall also comply with the provisions of GB/T 18262 and GB/T 18514.
All potential risk factors should be excluded or reduced by design as much as possible.
3.1.2 The safety color used on the drum chipper shall comply with the provisions of GB 2893.
3.1.3 The safety signs used on the drum chipper shall comply with the provisions of GB 2894.
3.1.4 Each component shall have sufficient strength, rigidity and stability. When manufactured, installed, stored, transported and used in accordance with the prescribed conditions, no one shall be
Safety poses a threat and causes harm.
3.1.5 Without affecting the use, the surface of exposed exposed parts should be as smooth and smooth as possible, and should not have sharp edges, sharp corners,
Burr and so on.
3.1.6 Parts that are difficult to move and are not suitable for hoisting shall be provided with obvious lifting rings, lifting lugs or lifting bolts, etc., or marked with obvious
Lifting position. The drum chipper should have a clear lifting position and center of gravity mark on the package.
3.1.7 Fasteners, such as bolts, screws, nuts, etc., should be taken when loosening or falling off, which may cause displacement of components and affect safety.
Shi. The connecting bolts of important parts (such as feed roller plate, joint expansion sleeve, knife roll guard plate, etc.) should be tightened according to the specified torque.
3.1.8 For the danger of inconvenient protection, not only the instructions should be given in the instruction manual, but also a warning sign should be placed near the dangerous part.
3.2 Transmission system
3.2.1 All exposed rotating parts (such as pulleys, couplings, sprockets, etc.) should be properly protected.
Take measures or set up safety guards. The guard should have sufficient strength and rigidity to ensure personal safety and should not cause additional
Danger.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of LY/T 1796-2008_English be delivered?Answer: Upon your order, we will start to translate LY/T 1796-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of LY/T 1796-2008_English with my colleagues?Answer: Yes. The purchased PDF of LY/T 1796-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|