|
US$419.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
LY/T 1454-2018: Test code for accuracy of wood based panel machinery
Status: Valid LY/T 1454: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| LY/T 1454-2018 | English | 419 |
Add to Cart
|
4 days [Need to translate]
|
Test code for accuracy of wood based panel machinery
| Valid |
LY/T 1454-2018
|
| LY/T 1454-1999 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Inspection for Precision of Artificial Board Machinery - General
| Obsolete |
LY/T 1454-1999
|
PDF similar to LY/T 1454-2018
Basic data | Standard ID | LY/T 1454-2018 (LY/T1454-2018) | | Description (Translated English) | Test code for accuracy of wood based panel machinery | | Sector / Industry | Forestry Industry Standard (Recommended) | | Classification of Chinese Standard | B97 | | Classification of International Standard | 79.120 | | Word Count Estimation | 18,138 | | Date of Issue | 2018-12-29 | | Date of Implementation | 2019-05-01 | | Older Standard (superseded by this standard) | LY/T 1454-1999 | | Regulation (derived from) | National Forestry and Grassland Bureau Announcement No.18 of 2018 | | Issuing agency(ies) | State Forestry and Grassland Administration | LY/T 1454-2018: Test code for accuracy of wood based panel machinery---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test code for accuracy of wood based panel machinery
ICS 79.120
B97
People's Republic of China Forestry Industry Standard
Replacing LY/T 1454-1999
General rules for mechanical precision inspection of wood-based panels
Published on.2018-12-29
2019-05-01 implementation
National Forestry and Grassland Bureau released
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces LY/T 1454-1999 "General Rules for Mechanical Precision Inspection of Wood-based Panels". Compared with LY/T 1454-1999, except for editorial
The main technical changes outside the revision are as follows.
--- Modified the scope;
--- Added normative references;
--- Increased the use of inspection methods and measurement tools;
--- Increased unit of measurement and measurement range;
--- Increased preparation work;
---Modified geometric accuracy test;
--- Modified the work accuracy test.
Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents.
This standard is proposed and managed by the National Standardization Technical Committee for Wood-based Panel Machinery (SAC/TC66).
This standard was drafted. Northeast Forestry University.
The main drafters of this standard. Dai Dali, Qi Yingjie, Zhang Zhaohao, Xu Yang, Lian Kui.
The previous versions issued by this standard are as follows.
---ZBB97027-1988;
---LY/T 1454-1999.
General rules for mechanical precision inspection of wood-based panels
1 Scope
This standard specifies the mechanical accuracy test method for wood-based panels. The accuracy test includes geometric accuracy inspection and work accuracy inspection.
This standard applies to the precision inspection of wood-based panel machinery (including panel furniture machinery, secondary processing machinery, bamboo processing machinery), and other
Wood and bamboo processing machinery can also be used as reference.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 11337 flatness error detection
GB/T 17421.1 General rules for machine tool inspection - Part 1. Geometrical accuracy of machine tools under no load or finishing conditions
3 Use of inspection methods and measurement tools
3.1 Inspection method
The accuracy of testing the wood-based panel machinery should be measured by the method of actual measurement. The actual measurement is difficult or difficult. The test error can not be exceeded.
Law (such as the use of limit gauges, etc.).
3.2 Use of measurement tools
Measurement uncertainty due to measurement tools and methods used should be considered during the test. The total error of the inspection tool should be related to the item being tested.
Tolerances are compatible and generally only account for less than 20% of the tolerance of the item being inspected.
For Class A assessments of uncertainty for repeated test data, repeat at least 5 tests for each given test.
The average value of the values is the measurement result.
During the inspection, the interference of airflow, light and heat radiation (such as sunlight, too close to the electric light, etc.) should be prevented.
When there is a significant change, the gauge should be accompanied by an accuracy checklist.
4 Unit of measurement and measurement range
4.1 Unit of measurement
The unit of measurement shall be implemented in accordance with the legal measurement unit of China. Tolerances and measurement ranges should be in the same unit system. Can not directly quote relevant
When the standard determines zero, component tolerances, especially dimensional tolerances, it should be detailed. Angle tolerance can be in angle units (degrees, minutes, seconds; arc
Degree) or tangent (expressed in millimeters per meter, eg 0.04/1000).
4.2 Measurement range
4.2.1 When the actual measurement range is larger than the specified measurement range, the specified measurement range can be arbitrarily selected within the actual measurement range.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of LY/T 1454-2018_English be delivered?Answer: Upon your order, we will start to translate LY/T 1454-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of LY/T 1454-2018_English with my colleagues?Answer: Yes. The purchased PDF of LY/T 1454-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version LY/T 1454-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version LY/T 1454-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|