|
US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
LY/T 1378-2004: Mat cross-cut saw
Status: Valid LY/T 1378: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| LY/T 1378-2004 | English | 229 |
Add to Cart
|
3 days [Need to translate]
|
Mat cross-cut saw
| Valid |
LY/T 1378-2004
|
| LY/T 1378-1999 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Cross-cut saw
| Obsolete |
LY/T 1378-1999
|
PDF similar to LY/T 1378-2004
Basic data | Standard ID | LY/T 1378-2004 (LY/T1378-2004) | | Description (Translated English) | Mat cross-cut saw | | Sector / Industry | Forestry Industry Standard (Recommended) | | Classification of Chinese Standard | B97 | | Classification of International Standard | 65.060.80 | | Word Count Estimation | 7,768 | | Date of Issue | 2004-11-03 | | Date of Implementation | 2004-12-01 | | Older Standard (superseded by this standard) | LY/T 1378-1999 | | Summary | This standard specifies the slab saws (hereinafter referred to as saws) parameters, requirements, test methods, inspection rules and signs, packaging, transportation and storage. This standard applies to fiberboard, particleboard and other production in horizontal slab sawing method truncated equipment. | LY/T 1378-2004: Mat cross-cut saw---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Mat cross-cut saw
ICS 65.060.80
B97
People's Republic of China Forestry Industry Standard
Replacing LY/T 1378-1999
Slab cross-section saw
Released on November 11,.2004
Implementation of.2004-12-01
State Forestry Administration released
Foreword
This standard replaces LY/T 1378-1999 "Cross-Saw".
The main changes in this standard compared with LY/T 1378-1999 are as follows.
--- Change the standard name to "Slab Cross-Saw";
--- Processing width increased to 3050mm;
--- Increased technical requirements for saw blade spindles;
--- Test methods, acceptance rules, signs, packaging, transportation, storage are rewritten according to new relevant standards.
This standard is proposed and managed by the National Technical Committee for Wood-based Panel Machinery Standardization.
This standard was drafted. Shanghai Wood-based Panel Machinery Co., Ltd.
The main drafter of this standard. Qian Jiayu.
The previous versions of the standards replaced by this standard are.
---ZBB97014-1986, LY/T 1378-1999.
Slab cross-section saw
1 Scope
This standard specifies the parameters, requirements, test methods, inspection rules and signs, packaging, transportation, and slab cross-cut saws (hereinafter referred to as cross-cut saws).
Storage.
This standard is applicable to the equipment for cutting the slab laterally by sawing method in the production of fiberboard and particleboard.
2 Normative references
The terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all
Modifications (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study
Is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard.
GB/T 191 packaging storage and transportation icon
GB 5226.1 Mechanical safety machinery and electrical equipment - Part 1. General technical conditions
GB/T 7932 pneumatic system general technical conditions
GB/T 13306 signage
General technical conditions for GB/T 13384 mechanical and electrical product packaging
General technical conditions for GB/T 18262 wood-based panel machinery
GB/T 18514 wood-based panel machinery safety rules
JB/T 9953 Woodworking Machine Noise Acoustic (Pressure) Level Measurement Method
3 parameters
3.1 Schematic
A schematic diagram of the cross-sectional saw structure is shown in Figure 1.
3.2 Parameters
3.2.1 Processing width is 915mm, 1220mm, 1830mm, 2440mm, 3050mm.
3.2.2 The thickness of the sawing slab is 10mm~300mm.
4 requirements
4.1 The design, manufacture and acceptance of cross-section saws shall comply with the requirements of GB/T 18262, in addition to complying with this standard.
4.2 Standard parts and purchased parts of cross-cut saws shall be certified and conform to national or industrial standards and shall be carried out simultaneously with the cross-cut saw.
Operation test.
4.3 Cross-cut saws shall comply with the safety technical requirements of GB/T 18514.
4.4 The saw blade travels flexibly on the beam guide rails, and must not be shaken during operation without creeping. The following two rollers and the beam guide surface
The assembly gap is no more than 0.8mm, and the platen moves freely.
4.5 The center plane deviation of the sprocket after assembly is not more than 0.5mm, and the chain pallet is in contact with the chain over its entire length.
4.6 Electrical technical requirements shall comply with the provisions of GB 5226.1.
4.7 The technical requirements of pneumatic components shall comply with the provisions of GB/T 7932.
4.8 Dry running noise should be no more than 80dB (A).
4.9 The temperature of each sliding bearing shall not exceed 60 °C, the temperature rise shall not exceed 30 °C, the temperature of rolling bearing shall not exceed 70 °C, and the temperature rise shall not exceed
Over 40 ° C.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of LY/T 1378-2004_English be delivered?Answer: Upon your order, we will start to translate LY/T 1378-2004_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of LY/T 1378-2004_English with my colleagues?Answer: Yes. The purchased PDF of LY/T 1378-2004_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version LY/T 1378-2004?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version LY/T 1378-2004 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|