HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (25 Oct 2025)

LY/T 1127-2013 English PDF

US$209.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
LY/T 1127-2013: Pneumatic cutting veneer clipper
Status: Valid

LY/T 1127: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
LY/T 1127-2013English209 Add to Cart 3 days [Need to translate] Pneumatic cutting veneer clipper Valid LY/T 1127-2013
LY/T 1127-1993English279 Add to Cart 3 days [Need to translate] (General technical pneumatic shears) Obsolete LY/T 1127-1993

PDF similar to LY/T 1127-2013


Standard similar to LY/T 1127-2013

LY/T 3022   LY/T 1346   SL 470   LY/T 1286   LY/T 1126   LY/T 1128   

Basic data

Standard ID LY/T 1127-2013 (LY/T1127-2013)
Description (Translated English) Pneumatic cutting veneer clipper
Sector / Industry Forestry Industry Standard (Recommended)
Classification of Chinese Standard B97
Classification of International Standard 79.120
Word Count Estimation 8,886
Older Standard (superseded by this standard) LY/T 1127-1993
Quoted Standard GB/T 191; GB 2894; GB 5226.1; GB/T 7932; GB/T 13306; GB/T 13384; GB/T 18262; GB/T 18514; JB/T 9953
Regulation (derived from) State Forestry Bulletin 2013 No. 8; industry standard filing Notice No. 5 of 2013 (No. 161 overall)
Issuing agency(ies) State Forestry Administration
Summary This standard specifies: pneumatic shears parameters, requirements, testing and marking, packing and storage. This standard applies to: plywood shear parallel to grain production, single- board pneumatic shears.

LY/T 1127-2013: Pneumatic cutting veneer clipper

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Pneumatic cutting veneer clipper ICS 79.120 B97 People's Republic of China forestry industry standards Replacing LY/T 1127-1993 Pneumatic shears 2013-03-15 released 2013-07-01 Implementation State Forestry Administration released

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces LY/T 1127-1993 "General technical conditions of pneumatic shearing machine." The main differences between this standard and LY/T 1127-1993 are as follows. --- Increased the main parameters of the specifications; --- revised and increased normative references; --- Requirements added shears safety requirements; --- Revised the blade straightness tolerance and the straightness of the base of the scissors to install the tolerance requirements; --- Modify the air-run test, load test test items; --- revised inspection rules; --- Increase the logo, packaging and storage requirements; --- Removed the appendix. Please note that some of this document may be patentable. The issuing agencies of this document do not bear the responsibility of identifying these patents. This standard by the National Panel Machinery Standardization Technical Committee (SAC/TC66) and focal point. This standard was drafted. Northeast Forestry University, Shandong Baishengyuan Group Co., Ltd.. The main drafters of this standard. Zhang Zhao Hao, Qi Yingjie, Dai Daoli, Xu Wei, Song Xiu Choi, Xia Hongwei, Wang Chengrui. This standard replaces the standards previously issued as follows. --- ZBB97014-1986; --- LY/T 1127-1993. Pneumatic shears

1 Scope

This standard specifies the parameters of pneumatic shears, requirements, inspection and marking, packaging and storage. This standard applies to the production of plywood monolithic shear line shear pneumatic shears (hereinafter referred to as "shears").

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 191 Packaging - Pictorial signs GB 2894 safety signs and guidelines for their use GB 5226.1 Safety of machinery - Electrical machinery and electronic equipment - Part 1. General specifications GB/T 7932 pneumatic system of general technical conditions GB/T 13306 signs GB/T 13384 mechanical and electrical product packaging General technical conditions GB/T 18262 General requirements for wood-based panel machinery GB/T 18514 General Principles of Mechanical Safety of Wood-Based Panels Woodworking machines - Acoustical noise (pressure) level measurement method

3 Schematic

Shears structure diagram shown in Figure 1. Description. 1 --- rack; 2 --- Turret 3 --- Pneumatic part; 4 --- blade 5 --- anvil roller bearing seat; 6 --- anvil roll. Note. This figure does not limit the specific structure of the shears. Figure 1 shears structure diagram

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of LY/T 1127-2013_English be delivered?

Answer: Upon your order, we will start to translate LY/T 1127-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of LY/T 1127-2013_English with my colleagues?

Answer: Yes. The purchased PDF of LY/T 1127-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version LY/T 1127-2013?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version LY/T 1127-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

Refund Policy     Privacy Policy     Terms of Service     Shipping Policy     Contact Information