|
US$129.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JY/T 0552-2015: (Insect specimens)
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| JY/T 0552-2015 | English | 129 |
Add to Cart
|
3 days [Need to translate]
|
(Insect specimens)
| Valid |
JY/T 0552-2015
|
Standard similar to JY/T 0552-2015 JY/T 0616 Basic data | Standard ID | JY/T 0552-2015 (JY/T0552-2015) | | Description (Translated English) | (Insect specimens) | | Sector / Industry | Education Industry Standard (Recommended) | | Word Count Estimation | 5,597 | | Date of Issue | 2016-10-24 | | Date of Implementation | 2017-01-01 | | Regulation (derived from) | Education - (2016) No.5 | | Issuing agency(ies) | Ministry of Education of the People's Republic of China | JY/T 0552-2015: (Insect specimens)---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Insect specimens)
ICS 03.180
Y 51
record number
Education Industry Standard of the People's Republic of China
Insect specimen
Insect specimens
Published on October 10,.2016
2017–01–01 Implementation
Published by the Ministry of Education of the People's Republic of China
JY
JY/T 0552―2015
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
Please note that some elements of this standard may involve patents. The issuer of this standard is not responsible for identifying these patents.
This standard was proposed by the National Education Equipment Standardization Technical Committee (SAC/TC 125).
This standard is under the jurisdiction of the National Technical Committee for Educational Equipment Standardization (SAC/TC 125).
This standard was drafted. Ningbo Qinghua Science and Education Instrument Co., Ltd., Ministry of Education Educational Equipment Research and Development Center, Nanning Qianfan Teaching
Technology Co., Ltd.
The main drafters of this standard. Hu Fuwei, Liu Junbo, Liang Nileo.
JY/T 0552―2015
Insect specimen
1 Scope
This standard specifies the classification, model designation, requirements, test methods, inspection rules and signs, instructions, packaging,
Transportation and storage.
This standard applies to insect specimens used in middle school teaching.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this document.
For undated references, the latest edition (including all amendments) applies to this document.
JY/T 0001-2003 General quality requirements for teaching instruments and equipment products
JY/T 0002-2003 Inspection rules for teaching instruments and equipment products
JY/T 0026-1991 teaching instrument and teaching equipment product model naming method
JY/T 0213-1994 Teaching mechanics, thermal instrument transportation, storage environmental conditions and test methods
3 Classification and model designation
3.1 According to the different technical characteristics of the products, the products are divided into dry insect specimens and embedded insect specimens.
3.2 The composition and form of the product model follow the provisions of JY/T 0026-1991, as follows.
SB ― JZDW ― G/BM ― 6
Product specifications, expressed by the number of types, 6 means 6 types
Feature code, G means dry, BM means embedding
Product name, KC pinyin prefix, KC means insect
Product model, classification code is SB
Model example 1. SB-KC-G-6, indicating a dry insect specimen containing 6 specimens.
Model example 2. SB-KC-BM-6, which represents an embedded insect specimen containing 6 specimens.
4 Requirements
4.1 Composition and dimensions
4.1.1 The product shall be selected from Orthoptera, Hemiptera, Homoptera, Coleoptera, Veinoptera, Lepidoptera, Diptera, Hymenoptera and Odonata.
The six goals represent the composition of insects.
JY/T 0552―2015
4.1.2 Locusts should be selected for orthoptera, and the length of the locust is not less than 30 mm.
4.1.3 Hemiptera should be selected for stingers, with a body length of not less than 15 mm, and wings spread.
4.1.4 Cicadas should be selected for homoptera, with a body length of not less than 30 mm.
4.1.5 Coleoptera should use beetles or beetles, with a body length of not less than 30 mm.
4.1.6 Arthropods should be selected from the family Antidae, with a body length of not less than 35 mm.
4.1.7 Lepidoptera should use butterflies or edwards, with a body length of not less than 20 mm and wings spread.
4.1.8 Diptera should choose flies with a body length of not less than 8 mm.
4.1.9 Hymenoptera should use bees or wasps with a body length of not less than 10 mm.
4.1.10 The dragonfly should choose dragonfly, with a body length of not less than 30 mm, and spread wings.
4.2 Appearance
Each specimen should be natural in shape, complete in structure, normal in color, and should be reshaped with antennae, feet, and wings, and the appearance should conform to JY/T 0001-2003
Chapter 7 requirements...
4.3 Identification
Each specimen should have a name tag or number tag for the name of the animal directly below it. If a number tag is used, it should be attached where the product does not affect observation.
Signed annotations.
4.4 Packaging and Arrangement Requirements for Dry Specimens
4.13.1 Each specimen shall be fixed to the liner of the specimen box in a natural posture.
4.13.2 The top surface of the specimen box should be colorless and transparent. Specimens made of plexiglass should be sealed. Non-plexiglass specimen boxes should be moisture-proof and
Insect measures.
4.13.3 The specimens should be arranged neatly and beautifully. The space between the outermost edges of the specimens should not be less than 20 mm.
The edge is less than 20 mm.
4.5 Packaging and layout requirements for specimens when the product is embedded
4.14.1 Each specimen is embedded in a resin material with a natural posture.
4.14.2 The embedded block shall be basically colorless and transparent, and there shall be no obvious air bubbles and dirt in the middle.
4.14.3 The specimens should be arranged neatly and beautifully. The space between the outermost edges of the specimens should not be less than 20 mm.
To 5 mm.
4.6 Environmental test
4.6.1 The product shall be tested for temperature according to JY/T 0213.
4.6.2 The product shall be subjected to a free drop test in accordance with JY/T 0213.
5 Test method
5.1 The dimensions of 4.1, 4.4.3 and 4.4.3 of this standard shall be inspected with a steel ruler with a division value of 1 mm.
5.2 Test method of plexiglass box sealing in 4.4.2. immerse the product in 300 mm depth of water for 10 min in the direction of normal flat placement,
There must be no water seepage.
JY/T 0552―2015
5.3 The temperature test of 4.6.1 of this standard shall be carried out in accordance with 4.1 of JY/T 0213-1994.
5.4 The drop test of 4.6.2 of this standard shall be conducted in accordance with 4.6 of JY/T 0213-1994.
5.5 Appearance and other sensory inspections.
6 Inspection rules
6.1 Inspection classification
The inspection of this product is divided into factory inspection, type inspection and quality supervision spot inspection.
6.2 Inspection items
The inspection items and methods of factory inspection and type inspection are shown in Table 1.
Table 1 Inspection items and methods of factory inspection and type inspection
Item No. Inspection Item Standard Provisions Factory Inspection Type Inspection
1 Technical requirements 4.1 ～ 4.5 ● ●
2 Environmental test 4.6 ― ●
Note. “●” in the table is the full inspection item, “〇” is the sampling inspection item, and “-” is not the inspection item.
6.3 Sampling method
6.3.1 During the factory inspection, all the inspection items shall be inspected first, and the sampling inspection items shall be inspected among the qualified products.
6.3.2 The samples for type inspection shall be taken from the products that passed the factory inspection.
6.3.3 The sampling methods for factory inspection and type inspection shall be in accordance with JY/T 0002.
6.4 Non-conformance determination
6.4.1 The determination of sampling inspection shall be in accordance with JY/T 0002.
6.4.2 The failure criterion of a single sample is in accordance with JY/T 0002.
6.4.3 When inspecting all inspection items, it shall be judged according to the unqualified criterion of a single sample.
6.4.4 All provisions of this standard are main performance indicators.
6.5 Quality supervision random inspection
Quality supervision and random inspection shall be in accordance with JY/T 0002.
7 Signs, instructions, packaging, transportation and storage
Should comply with the relevant provisions of Chapter 7 of JY/T 0001-2003.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of JY/T 0552-2015_English be delivered?Answer: Upon your order, we will start to translate JY/T 0552-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of JY/T 0552-2015_English with my colleagues?Answer: Yes. The purchased PDF of JY/T 0552-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|