HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

JJG 1082.2-2013 English PDF

US$299.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJG 1082.2-2013: Verification Regulation of Means of Measuring Instrument for Wheel-Diameter of Railway Locomotives and Vehicles. Part 2: Means of Measuring Tools for Wheel-Diameter
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JJG 1082.2-2013English299 Add to Cart 3 days [Need to translate] Verification Regulation of Means of Measuring Instrument for Wheel-Diameter of Railway Locomotives and Vehicles. Part 2: Means of Measuring Tools for Wheel-Diameter Valid JJG 1082.2-2013

PDF similar to JJG 1082.2-2013


Standard similar to JJG 1082.2-2013

JJG 1114   JJF 1280   JJF 1126   JJF 1097   JJG 1088   JJG 1082.1   

Basic data

Standard ID JJG 1082.2-2013 (JJG1082.2-2013)
Description (Translated English) Verification Regulation of Means of Measuring Instrument for Wheel-Diameter of Railway Locomotives and Vehicles. Part 2: Means of Measuring Tools for Wheel-Diameter
Sector / Industry Metrology & Measurement Industry Standard
Classification of Chinese Standard A52
Classification of International Standard 17.040
Word Count Estimation 13,171
Regulation (derived from) ?State AQSIQ Announcement 2013 No. 7;
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine
Summary This standard applies to railway rolling wheel diameter gauge gage initial verification, follow-up test and use checks.

JJG 1082.2-2013: Verification Regulation of Means of Measuring Instrument for Wheel-Diameter of Railway Locomotives and Vehicles. Part 2: Means of Measuring Tools for Wheel-Diameter


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Verification Regulation of Means of Measuring Instrument for Wheel-Diameter of Railway Locomotives and Vehicles.Part 2. Means of Measuring Tools for Wheel-Diameter State verification procedures People's Republic of China Railway rolling stock wheel diameter measuring gage Part 2. wheel diameter measuring gage Part 2. MeansofMeasuringToolsforWheel-Diameter Issued on. 2013-01-06 2013-04-06 implementation The State Administration of Quality Supervision, Inspection and Quarantine released Railway rolling stock wheel diameter Gage Gage verification procedures Part 2. wheel diameter measuring gage LocomotivesandVehicles-Part 2. Meansof Measuring Focal point. the National Railway special equipment metering metering technology committee Special railway length of the Technical Committee The main drafting units. the Ministry of Railways Institute of Measurement Standards Liuzhou Branch Road, measuring instruments limited liability company Participated in the drafting unit. Zhengzhou Railway Bureau of quality and technical supervision Wuhan Railway Bureau of quality and technical supervision This procedure entrust the national railway special equipment measurement technology committee railway length measurement technology division The Committee is responsible for interpreting surgery The main drafters of this procedure. Wang Yanchun (MOR Standards and Metrology Institute) Ancient Healer (Liuzhou Branch Road, measuring instruments limited liability company) Drafters participate. Hua Xia Wei (Zhengzhou Railway Bureau of quality and technical supervision) Chu Shusheng (Wuhan Railway Bureau of quality and technical supervision)

table of Contents

Introduction (Ⅱ) 1 Scope (1) 2 Overview (1) 3 metering performance requirements (1) 3.1 Measurement Block combination formula gage (1) 3.2 Measurement Standard arc type gages (2) 4 General Requirements (2) 5 control of measuring instruments (2) 5.1 verification Conditions (2) 5.2 Verification Project (3) 5.3 Verification Methods (3) 5.4 Verification Results Processing (5) 5.5 test cycle (5) Appendix A Locomotive wheel diameter measuring gage calibration record sheet (6) Appendix B calibration certificate and test results in the notice page format (7)

Introduction

JJG 1082 "railway rolling stock wheel diameter measuring gage" consists of two parts. --- Part 1. round foot diameter gage; --- Part 2. wheel diameter measuring gage. When using this procedure in Railway Locomotive wheel diameter measuring gage calibration, this subject should be selected according to the type of gage Procedures set the appropriate section. This section is about the contents of wheel diameter measuring gage measurement verification, according JJF1002-2010 "National Measurement Unit Setting rules to write rules ", JJG 1081.2-2013" railway rolling stock wheel diameter measuring diameter measurement - Part 2 "And other requirements compiled. This procedure was first formulated. Railway rolling stock wheel diameter measuring gages test procedures Part 2. wheel diameter measuring gage

1 Scope

The order applies to railway rolling stock wheel diameter measuring gage initial verification, use and subsequent verification check.

2 Overview

Railway rolling stock wheel diameter measuring gage (hereinafter referred to as "measuring gage") for verification Locomotive wheel diameter Indication error of measuring devices, including standard arc two forms and seized a quantity of a combination of block-type gage. Standard arc type gages by an arcuate circular surface, lateral positioning surface and base composition. The combined amount of the seizure by a precision-block cylinder chord gauge blocks, bow high in blocks, spacers, and base plate and other combinations to make. It works for the V-groove diameter measuring method, the diagram shown in Figure 1. Figure 1 - Block seized a combined amount of work Schematic

3 metering performance requirements

3.1 Measurement combination formula Gage Block 3.1.1 Surface roughness 3.1.1.1 surface roughness Ra of the upper cylinder precision cylindrical surface is 0.4μm. 3.1.1.2 surface roughness Ra of the upper gauge block measuring surface is 0.08μm. 3.1.2 Precision cylinder diameter and cylindricity Cylindricity Precision Cylindrical should be less than 0.002mm. The nominal value of two precision cylindrical diameter of d0 = 61mm, given its actual value, the diameter difference should be less than 0.004mm.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJG 1082.2-2013_English be delivered?

Answer: Upon your order, we will start to translate JJG 1082.2-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJG 1082.2-2013_English with my colleagues?

Answer: Yes. The purchased PDF of JJG 1082.2-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.