HOME Cart(0) Quotation About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

JJF 1941-2021 English PDF

US$1039.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJF 1941-2021: Calibration Specification for Material Measures of Length Measuring Instrument with Optical Principle
Status: Valid

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
JJF 1941-2021	English	1039	Add to Cart	7 days [Need to translate]	Calibration Specification for Material Measures of Length Measuring Instrument with Optical Principle	Valid	JJF 1941-2021

PDF similar to JJF 1941-2021

Standard similar to JJF 1941-2021

JJF 1951 JJF 1561 JJF 1406 JJF 1944 JJF 1945 JJF 1933

Basic data

Standard ID	JJF 1941-2021 (JJF1941-2021)
Description (Translated English)	Calibration Specification for Material Measures of Length Measuring Instrument with Optical Principle
Sector / Industry	Metrology & Measurement Industry Standard
Classification of Chinese Standard	A52
Classification of International Standard	17.040
Word Count Estimation	47,421
Date of Issue	2021-12-08
Date of Implementation	2022-06-08
Issuing agency(ies)	State Administration for Market Regulation
Summary	This standard is applicable to the inspection tools of optical instruments such as square ruler, knife-edge square ruler, crosshair mandrel, cone mandrel, standard mandrel, square, eccentric shaft and special glass ruler (hereinafter referred to as the inspection tool). calibration.

JJF 1941-2021: Calibration Specification for Material Measures of Length Measuring Instrument with Optical Principle

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
National Metrology Technical Specifications of the People's Republic of China Specification for Calibration of Optical Instrument Gauge Released on 2021-12-08 2022-06-08 Implementation Released by the State Administration for Market Regulation Specification for Calibration of Optical Instrument Gauge withOpticalPrinciple Responsible unit: National Technical Committee of Geometric Engineering Parameter Metrology Main drafting unit: Beijing Great Wall Metrology and Testing Technology Research Institute of Aviation Industry Corporation of China Fifth Institute of Electronics, Ministry of Industry and Information Technology Shenzhen AVIC Technology Testing Institute Co:, Ltd: Participating in the drafting unit: Shandong Institute of Metrology Jiangsu Institute of Metrology East China Branch of the Fifth Electronic Research Institute of the Ministry of Industry and Information Technology This specification entrusts the National Geometric Engineering Parameter Metrology Technical Committee to be responsible for interpretation The main drafters of this specification: Sun Yujiu (Beijing Great Wall Institute of Metrology and Testing Technology, Aviation Industry Corporation of China) Qian Feng (Beijing Great Wall Metrology and Testing Technology Research Institute of Aviation Industry Corporation of China) Changqing (Fifth Institute of Electronics, Ministry of Industry and Information Technology) Wei Jufeng (Shenzhen AVIC Technology Testing Institute Co:, Ltd:) Participating drafters: Jia Minqiang (Shandong Institute of Metrology) Zhu Feihong (Jiangsu Institute of Metrology) Zhou Hanying (East China Branch of the Fifth Institute of Electronics, Ministry of Industry and Information Technology)

Introduction (Ⅲ) 1 Scope(1) 2 References(1) 3 Overview(1) 3:1 Square ruler(1) 3:2 Knife-edged square (1) 3:3 Reticle Arbor (2) 3:4 Tapered mandrel (2) 3:5 Standard mandrel(2) 3:6 Cube(3) 3:7 Eccentric shaft(3) 3:8 Special glass ruler (4) 4 Metrological characteristics(4) 4:1 Square ruler(4) 4:2 Knife-edged square (4) 4:3 Reticle mandrel (5) 4:4 Cone mandrel (5) 4:5 Standard mandrel(5) 4:6 Cube(5) 4:7 Eccentric shaft (6) 4:8 Special glass ruler (6) 5 Calibration conditions(6) 5:1 Environmental conditions (6) 5:2 Measuring standards and other equipment (6) 5:3 Other conditions (9) 6 Calibration Items and Calibration Methods(9) 6:1 Square ruler(9) 6:2 Knife-edged square (9) 6:3 Reticle mandrel (11) 6:4 Tapered mandrel (12) 6:5 Standard Mandrel(14) 6:6 Cube(14) 6:7 Eccentric shaft (17) 6:8 Special glass ruler (17) 7 Expression of Calibration Results(18) 8 Recalibration interval(18) Appendix A Evaluation of Uncertainty in Measurement of Flatness of Square Square Ruler (19) Appendix B Evaluation of Measurement Uncertainty of Angle Deviation of Knife-edge Square (22) Appendix C Measurement Uncertainty Evaluation of the Deviation Between the Crosshair of the Crosshair Mandrel and the Line Connecting the Centers of the Two Center Holes (24) Appendix D Measurement Uncertainty Evaluation of Cone Half Angle Deviation of Cone Mandrel (26) Appendix E Evaluation of Measurement Uncertainty of Standard Mandrel Runout (29) Appendix F Measurement Uncertainty Evaluation of Square Working Angle Deviation (31) Appendix G Measurement Uncertainty Evaluation of Eccentric Shaft Eccentricity (33) Appendix H Evaluation of Measurement Uncertainty of Grading Line Deviation of Special Glass Ruler (35) Appendix I Calibration Certificate Contents and Inner Page Format (37)

Introduction

JJF 1071-2010 "Rules for Compilation of National Metrology Calibration Standards", JJF 1001-2011 "General Metrology Terminology and Definition", JJF 1059:1-2012 "Evaluation and Expression of Measurement Uncertainty" jointly constitute the support for the formulation of this calibration specification The basic series of specifications: This specification is published for the first time: Specification for Calibration of Optical Instrument Gauge

1 Scope

This specification is applicable to four-edged square ruler, knife-edged square ruler, reticle mandrel, cone mandrel, standard mandrel, square Calibration of optical instrument inspection tools (hereinafter referred to as inspection tools) such as body, eccentric shaft and special glass ruler:

2 References

This specification references the following documents: JJG56 Tool Microscope JJG57 Optical, digital display dividing head JJG571 Reading and measuring microscope JJF 1093 Projector Calibration Specification JJF 1094-2002 Evaluation of Measuring Instrument Characteristics JJF 1109 Calibration specification for runout tester For dated references, only the dated version applies to this specification; for undated references document, its latest version (including all amendments) applies to this specification:

3 Overview

3:1 Square ruler The square ruler is a measuring instrument for measuring flatness and parallelism, mainly used to measure the straight line of workpiece or guide rail: Degree and parallelism, such as tool microscope, straightness of vertical and horizontal slide movement of projector, and workbench and vertical and horizontal slide Parallelism of the direction of plate movement: The four-sided square ruler is generally based on its working length as the model specification: The common model specification is L200mm, and its working length The degree is:200mm, and the overall dimension is 205mm: The working face includes main working face, side working face, bottom working face, The structure diagram is shown in Figure 1: Figure 1 Schematic diagram of the structure of the square ruler 3:2 Knife-edged square Knife-edge square is a measuring instrument with a standard right angle composed of knife-edge edges, mainly used for measuring workpieces or guides: The straightness and verticality of the track, such as the verticality of the vertical and horizontal slides of the tool microscope and projector: Knife-edge square has two structures: triangle and rectangle: Generally, the working length is used as the model specification, and the common model

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJF 1941-2021_English be delivered?

Answer: Upon your order, we will start to translate JJF 1941-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJF 1941-2021_English with my colleagues?

Answer: Yes. The purchased PDF of JJF 1941-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.