HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

JJF 1534-2015 English PDF

US$1179.00 · In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJF 1534-2015: Calibration Sepecification for Data Network Performance Testers
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JJF 1534-2015English1179 Add to Cart 8 days [Need to translate] Calibration Sepecification for Data Network Performance Testers Valid JJF 1534-2015

PDF similar to JJF 1534-2015


Standard similar to JJF 1534-2015

JJF 1234   JJF 1396   JJG 376   JJF 2016   JJF 1533   JJF 1532   

Basic data

Standard ID JJF 1534-2015 (JJF1534-2015)
Description (Translated English) Calibration Sepecification for Data Network Performance Testers
Sector / Industry Metrology & Measurement Industry Standard
Classification of Chinese Standard A56
Classification of International Standard 17.220
Word Count Estimation 51,551
Date of Issue 2015-06-15
Date of Implementation 2015-09-15
Quoted Standard JJF 1237-2010; ANSI/IEEE 802.3; ISO/IEC 9314-3-1990; ANSI X3.116-1990; RFC 768; RFC 791; RFC 792; RFC 793; RFC 826; RFC 1661; ITU-T I.361
Regulation (derived from) AQSIQ Announcement 2015 No.72
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine
Summary This standard specifies the data network performance tester protocol codec, throughput, packet loss rate, back to back, and delay characteristics measured parameters, calibration methods and calibration equipment used in the requirements applicable to 10 Gbit/s data rate and below data network performance tester calibration communication.

JJF 1534-2015: Calibration Sepecification for Data Network Performance Testers

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Data network performance tester calibration specification) People's Republic of China National Metrology Technical Specifications Data network performance tester calibration specification Issued on. 2015-06-15 2015-09-15 implementation The State Administration of Quality Supervision, Inspection and Quarantine released Data network performance tester Calibration Specification Focal point. the National Radio Technical Commission metering Drafted by. the Ministry of Industry and Information Technology and Telecommunication Metrology Center This specification commissioned the National Radio Technical Commission responsible for the interpretation of measurement The main drafters of this specification. Tube Yuan (Ministry of Industry and Information Technology Telecommunication Metrology Center) Cao Han (Ministry of Industry and Information Technology Telecommunication Metrology Center) Drafters participate. Zhangzhi Bing (Industry and Information Technology Ministry of Communications Measurement Center)

table of Contents

Introduction (Ⅲ) 1 Scope (1) 2. References (1) 3 terminology and units of measurement (1) Throughput 3.1 (1) 3.2 drop frame (packet) Rate (1) 3.3 back to back (2) Delay 3.4 (2) 3.5 packet transmission rate (2) 4 Overview (2) 5 Metrological characteristics (2) 5.1 SDH/PDH Series Interface (2) 5.2 Ethernet optical interface (2) 5.3 Coding Protocol (3) 5.4 protocol decoding (4) Performance parameters 5.5 (4) 5.6 function tests (4) 6 calibration conditions (4) Environmental conditions 6.1 (4) 6.2 standards and other measuring equipment (4) 7 calibration items (5) 7.1 Physical interface parameters (5) 7.2 Coding Protocol (6) 7.3 protocol decoding (7) 7.4 Performance parameters (7) 7.5 function tests (7) Calibration Method 8 (7) 8.1 works fine and functional checks (7) 8.2 Calibration physical interface parameters (7) 8.3 Coding Protocol (7) 8.4 protocol decoding (8) 8.5 Performance parameters (8) 9 calibration results expression (12) 10 Recalibration interval (12) Appendix A data network performance tester calibration record contents (13) Appendix B data network performance tester calibration certificate page format (27) Appendix C data network performance tester calibration uncertainty evaluation instance (41) Appendix D data network performance tester function test project reference table (44)

Introduction

This specification based JJF 1071-2010 "National Calibration Specifications writing rules", JJF 1059.1-2012 "Evaluation and Expression of Uncertainty in Measurement" in preparation. International standards in this specification references and references. codec section, each protocol header fields are defined references EthernetⅡ/IEEE802.3 standard, RFC791, RFC793, RFC768, RFC826, RFC792, ITU-TⅠ.361, RFC1661 international standards. Data network performance tester calibration specification

1 Scope

This specification defines the data network performance tester protocol codec, throughput, packet loss rate, back to back, delay Metrological characteristics and other parameters, calibration methods and calibration of equipment used in the requirements for 10Gbit/s and below rates Data network performance tester calibration data communication. 2. References This specification refers to the following documents. JJF 1237-2010 SDH/PDH transmission analyzer calibration specification ANSI/IEEE802.3 collision detection access method uses Carrier Sense Multiple Access (CSMA/CD) and Physical Layer Specification (CarrierSense MultipleAccesswithColisionDetection (CSMA/CD) AccessMethodandPhysicalLayerSpecifications) ISO /IEC 9314-3.1990 (E) Information processing systems --- FDDI (FDDI) - Article Part 3. Physical Layer Medium decisions (PMD) (ISO /IEC 9314-3.1990); English version ENISO 9314-3. 1995 (Informationprocessingsystems-FiberDistributedDataInterface (FDDI) -Part 3. PhysicallayerMediumDependent (PMD) (ISO /IEC 9314-3.1990); Englishversion ENISO 9314-3.1995) ANSIX3.116-1990 information systems --- FDDI (FDDI) - Token Ring media decisions (PMD) R (1995) (InformationSystems-FiberDataDistributedInterface (FDDI) - TokenRingPhysicalLayerMediumDependent (PMD) R (1995)) RFC768 User Datagram Protocol (UserDatagramProtocol) RFC791 Internet Protocol (InternetProtocol) RFC792 Internet Control Message Protocol (InternetControlMessageProtocol) RFC793 Transmission Control Protocol (TransmissionControlProtocol) RFC826 Ethernet ARP (EthernetAddressResolutionProtocol) RFC1661 Point Protocol (ThePoint-to-PointProtocol (PPP)) ITU-TⅠ.361 B-ISDNATM layer specification (B-ISDNATMlayerspecification) For dated references, only the dated edition applies to this specification; undated reference documents Member, the latest edition (including any amendments) applies to this specification.

3 terminology and units of measurement

3.1 Throughput throughput DUT without dropped frames (packet), the maximum forwarding rate. With a frame (packet)/second (fps), bits / Second (bit/s) as well as the percentage of line rate (%) to represent. 3.2 drop frame (packet) rate packetloss

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJF 1534-2015_English be delivered?

Answer: Upon your order, we will start to translate JJF 1534-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJF 1534-2015_English with my colleagues?

Answer: Yes. The purchased PDF of JJF 1534-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.