HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

JJF 1408-2013 English PDF

US$439.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
JJF 1408-2013: Calibration Specification for Articulated Arm Coordinate Measuring Machines
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JJF 1408-2013English439 Add to Cart 4 days [Need to translate] Calibration Specification for Articulated Arm Coordinate Measuring Machines Valid JJF 1408-2013

PDF similar to JJF 1408-2013


Standard similar to JJF 1408-2013

JJF 1561   JJF 1406   JJF 1280   JJF 1411   JJF 1410   

Basic data

Standard ID JJF 1408-2013 (JJF1408-2013)
Description (Translated English) Calibration Specification for Articulated Arm Coordinate Measuring Machines
Sector / Industry Metrology & Measurement Industry Standard
Classification of Chinese Standard A52
Classification of International Standard 17.040
Word Count Estimation 19,145
Quoted Standard JJF 1071-2010; ASME B89.4.22
Regulation (derived from) ?AQSIQ Announcement 2013 No. 74;
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine
Summary This standard applies to calibrate articulated arm coordinate measuring machine.

JJF 1408-2013: Calibration Specification for Articulated Arm Coordinate Measuring Machines

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Calibration Specification for Articulated Arm Coordinate Measuring Machines People's Republic of China National Metrology Technical Specifications Articulated arm coordinate measuring machine calibration specification Issued on. 2013-05-13 2013-08-13 implementation The State Administration of Quality Supervision, Inspection and Quarantine released Articulated arm coordinate measuring machine calibration specification Machines Focal point. the National Technical Committee of length measuring geometry The main drafting units. China Institute of Metrology Participated in the drafting unit. Jilin Institute of Metrology Hexagon Measurement Technology (Qingdao) Co., Ltd. FARO International Trade (Shanghai) Co., Ltd. This specification length measuring geometry commissioned the National Technical Committee is responsible for interpretation The main drafters of this specification. Dual Li (China Institute of Metrology) Jiangyuan Lin (China Institute of Metrology) Drafters participate. Kang Yao (China Institute of Metrology) Dou Yanhong (Jilin Institute of Metrology) Jiang Yayan (Hexagon Measurement Technology (Qingdao) Co., Ltd.) Deng Bin (law such as the International Trade (Shanghai) Co., Ltd.)

table of Contents

Introduction (Ⅱ) 1 Scope (1) 2. References (1) 3 Terms (1) 4 Overview (1) 5 Metrological characteristics (2) 5.1 single-axis coordinate measuring consistency (2) 5.2 spatial length indication error (2) Calibration Condition 6 (2) 6.1 environmental conditions (2) 6.2 Main calibration equipment and requirements (2) 7 calibration items and methods (3) 7.1 single-axis coordinate measuring consistency (3) 7.2 spatial length indication error (4) 8 calibration results (5) 9 Recalibration interval (5) Appendix A single-point calibration probe recommended specific methods (6) Appendix B Calibration recording format include (7) Appendix C shows the length of the measuring arm space Error Uncertainty Evaluation (11) Appendix D measurement process (13) does not meet the requirements of

Introduction

The specification for the first time to develop. The main basis for performance measurement and calibration methods ASMEB89.4.22 "articulated arm CMM performance evaluation methods "(MethodsforPerformanceEvaluationofArticulatedArm CoordinateMeasuringMachines) were prepared. Articulated arm coordinate measuring machine calibration specification

1 Scope

This standard applies to the calibration of articulated arm coordinate measuring machine. 2. References This specification refers to the following documents. JJF 1071-2010 National Calibration Specifications writing rules ASMEB89.4.22 articulated arm coordinate measuring machine performance evaluation method (MethodsforPerformance EvaluationofArticulatedArmCoordinateMeasuringMachines) For dated references, only the dated edition applies to this specification; undated reference documents Member, the latest edition (including any amendments) applies to this specification.

3 Terms

3.1 club standardbar, balbar The amount of two or more of the same diameter as a standard ball by the rigid connecting rod composed regulation. Note. center club length is the standard length ball center of the space. Reference ASMEB89.4.22.

4 Overview

Articulated arm coordinate measuring machine, also known as portable 3D measuring arm, crank-type coordinate measuring machine (hereinafter referred to as the measurement arm). Measurement is based on the rotation arm joints and rotating arm coordinate measurement system by the angle at each joint compilation Angle encoder measurement information obtained through the coordinate transformation to obtain the coordinates of the probe in the instrument coordinate system. Measuring arm joints generally consists of three components, namely, shoulder, elbow and wrist, shoulder should include A and B Shaft, including the D shaft elbow, wrist and includes E and F shaft. Probe is mounted on a shaft final, Achieved by manual measurements. Common 5-axis measuring arm, 6-axis and 7-axis several configurations, 1 to 4 FIG. Figure 12-1-2 constructed by ABDEF rotation axis configuration according to FIG 22-2-2 ABCDEF rotation axis

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of JJF 1408-2013_English be delivered?

Answer: Upon your order, we will start to translate JJF 1408-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of JJF 1408-2013_English with my colleagues?

Answer: Yes. The purchased PDF of JJF 1408-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.