HOME   Cart(1)   Quotation   About-Us Tax PDFs Standard-List
Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 189760 (24 Feb 2024)

JJF 1104-2003 (JJF1104-2003)

JJF 1104-2003_English: PDF (JJF1104-2003)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JJF 1104-2003English369 Add to Cart 3 days [Need to translate] Rule for drafting national verification scheme Valid JJF 1104-2003

Standard ID JJF 1104-2003 (JJF1104-2003)
Description (Translated English) Rule for drafting national verification scheme
Sector / Industry Metrology & Measurement Industry Standard
Classification of Chinese Standard A50
Word Count Estimation 14,194
Date of Issue 2003-05-12
Date of Implementation 2003-09-12
Quoted Standard JJF 1001-1998; JJF 1059-1999; JJF 1033-2001; JJF 1094-2002; GB/T 15481-2000; OIML D5
Drafting Organization China Institute of Metrology
Administrative Organization Measurement and Management Committee of the National Measurement Technology
Issuing agency(ies) State Administration of Quality Supervision, Inspection and Quarantine
Summary This standard applies to: National Metrological Verification System (hereinafter referred to as Verification System) write.

Standards related to: JJF 1104-2003

JJF 1104-2003
Rule for drafting national verification scheme
National Metrology Technical Specification of the People's Republic
National Metrology Verification System Table Writing Rules
Released on.2003-05-12
2003-09-12 implementation
The General Administration of Quality Supervision, Inspection and Quarantine issued
National Metrology System
Writing rules
This specification was approved by the General Administration of Quality Supervision, Inspection and Quarantine on May 12,.2003, and
Implemented on September 12,.2003.
Focal Point. National Metrology Management Metrology Technical Committee
Drafted by. China Institute of Metrology
This specification is interpreted by the focal point
The main drafters of this specification.
Shi Changyan (China Institute of Metrology)
Wang Weinong (China Institute of Metrology)
Participate in the drafters.
Li Anxi (China Institute of Metrology)
table of Contents
1 range (1)
2 Citations (1)
3 General (1)
4 Terms and definitions (1)
4.1 National [Measurement] Standards (1)
National [metering] standard
4.2 [Measurement] Standard (2)
[metering] standard
4.3 Measuring Instruments (2)
measuring tools
4.4 Best measurement capability (2)
5 Structure of the verification system table (2)
6 Writing requirements (2)
6.1 Front and back cover (2)
6.2 Title Page (3)
6.3 Scope (3)
6.4 Measurement basis (3)
6.5 Measurement Standards (3)
6.6 Work Measuring Instruments (3)
6.7 Ratio of uncertainty between leveling gauges (4)
6.8 Ratio of uncertainty of the characteristic evaluation result to the absolute value of the maximum allowable error (4)
6.9 Calibration System Table Block Diagram (4)
Appendix A Verification System Table Cover and Back Cover Format (5)
Appendix B Verification System Table Page and Front Page Format (7)
Appendix C Calibration System Table Block Format (9)
National Metrology Verification System Table Writing Rules
1 Scope
This rule applies to the preparation of the National Metrological Verification System Table (hereinafter referred to as the Verification System Table).
2 Citations
The contents of the following documents constitute the provisions of this rule by reference. At the time of publication of this rule, the Institute
The versions are valid. However, all standards or specifications will be revised, and parties using the rules should explore the following
The possibility of offering the latest version.
JJF 1001-1998 general measurement terms and definitions
JJF 1059-1999 Measurement Uncertainty Evaluation and Representation
JJF 1033-2001 measurement standard assessment specification
JJF 1094-2002 measuring instrument characteristics evaluation
GB/T 15481-2000 General requirements for testing and calibration laboratory capabilities
OIML International Document No. 5. PrinciplefortheEstablishmentofHierarchySchemesforMeasuring
Instruments (principles for the development of metering charts)
3 General
The verification system table is a statutory technical document prepared for the specified quantity transfer procedure, the purpose of which is to guarantee the order
The volume value is accurately and reliably transmitted to the working measuring instrument through the measurement standard through the measurement standard.
The composition of the verification system table includes.
--- From the measurement basis to the various measuring instruments and the value transfer relationship of the working measuring instrument;
---Allow (or recommend) the method and measuring instrument used;
--- Uncertainty requirements for the reproduction or preservation of the standard;
--- The best measurement capability requirements that should be achieved when the measurement reference and measurement standards are used for quantity transfer.
The verification system table shall be prepared, approved and promulgated by the metrological administrative department of the State Council and implemented throughout the country.
In the calibration work, you can refer to the calibration system table to determine the appropriate traceability path.
The preparation of the verification system table should be.
--- In line with the relevant national laws and regulations;
--- Reflecting the relationship between quantity and value, the concept is clear and concise;
--- Combined with the production, use and verification of measuring instruments at home and abroad, try to reduce the value transmission link and make the verification
The system is economically sound and practical.
4 Terms and definitions
4.1 National [measurement] standard national[measurement]standard
National [measurement] benchmark