Path: Home > MISC > Page169 > JG/T 116-2012 || Home > Standard_List > MISC > Page169 > JG/T 116-2012 Price & DeliveryUS$339.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
JG/T 116-2012: Polycarbonate multiwall sheet
Status: Valid
JG/T 116: Evolution and historical versions
| Std ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status |
| JG/T 116-2012 | English | 339 |
Add to Cart
|
3 days [Need to translate]
|
Polycarbonate multiwall sheet
| Valid |
| JG/T 116-1999 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Multiwall polycarbonate sheets
| Obsolete |
Standard similar to JG/T 116-2012 JG/T 125 | GB/T 14370 | JG/T 402 | JG/T 571 | JG/T 347 | JGJ 116 | Basic data | Standard ID | JG/T 116-2012 (JG/T116-2012) | | Description (Translated English) | Polycarbonate multiwall sheet | | Sector / Industry | Building & Construction Industry Standard (Recommended) | | Classification of Chinese Standard | Q74 | | Classification of International Standard | 91.060 | | Word Count Estimation | 13,177 | | Older Standard (superseded by this standard) | JG/T 116-1999 | | Quoted Standard | GB/T 1036-2008; GB/T 1040.1-2006; GB/T 1040.2-2006; GB/T 1634.2-2004; GB/T 2410-2008; GB/T 2411-2008; GB/T 2680-1994; GB/T 2828.1-2003; GB/T 2918-1998; GB/T 8484-2008; GB 8624-2006; GB/T 11942-1989; GB/T 15227-2007; GB/T 16422.1-2006; GB/T 16422.2 -1999; | | Adopted Standard | ISO 11963-1995, MOD | | Regulation (derived from) | Bulletin of the Ministry of Housing and Urban No. 1300; industry standard filing Notice 2012 No. 4 (No. 148 overall) | | Issuing agency(ies) | Ministry of Housing and Urban-Rural Development of the People's Republic of China | | Summary | This standard specifies the polycarbonate (PC) hollow plate terminology and definitions, classification and marking, materials, requirements, test methods, inspection rules, marking, packaging, transportation and storage. This standard applies to general | JG/T 116-2012: Polycarbonate multiwall sheet---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Polycarbonate multiwall sheet
ICS 91.060
Q74
People's Republic of China building industry standards
Replacing JG/T 116-1999
Polycarbonate (PC) hollow board
(ISO 11963..1995, Plastic-Polycarbonatesheets-Types,
dimensionsandcharacteristics, MOD)
Posted on.2012-02-09
2012-08-01 implementation
Ministry of Housing and Urban-Rural Development, People's Republic of China released
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces the JG/T 116-1999.
This standard is the revision of JG/T 116-1999 "polycarbonate (PC) hollow plate", compared with the JG/T 116-1999 main technical changes
As follows.
--- Increased drop hammer impact (perforated characteristics) of the determination;
--- Increased the haze, weatherability requirements;
--- Increased the haze, the definition of the term yellow index;
--- Increased the Poisson's ratio of polycarbonate raw materials;
--- Increased shading coefficient, sound insulation performance, bearing capacity requirements;
--- Modify the model representation;
--- Modify the size deviation requirements;
--- Modify the requirements of light transmittance;
--- Modify the product classification.
This standard uses the redrafted law, modify the use of ISO 11963..1995 "Polycarbonate sheet type, size and characteristics," and
The main technical differences of ISO 11963..1995 are as follows.
--- Increased size measurement methods, part of the test methods used by the national standards;
--- Increased product classification and identification;
--- Increased drop hammer impact (perforated characteristics) of the determination;
--- Increased linear expansion coefficient determination method;
--- Increased the haze, weatherability requirements;
--- Increased the Poisson's ratio of polycarbonate raw materials;
--- Increased shading coefficient, sound insulation performance, bearing capacity requirements;
--- Modify the size deviation requirements;
--- Modify the light transmittance requirements.
This standard proposed by the Ministry of Housing and Urban Standard and Design Institute.
This standard by the Ministry of Housing and Urban Construction Building Components Standardization Technical Committee centralized.
This standard is drafted by. National Chemical Building Materials Testing Center.
Participated in the drafting of this standard. Shanghai Huili - Tag Plates Co., Ltd., Bayer (Beijing) Co.,
Co., Ltd., Changzhou Sunshine Optoelectronics Technology Co., Ltd., Foshan City, Ketron Building Materials Co., Ltd., Beijing Huihong Kapluon Electronics Co., Ltd.
Division, Germany Lucky Card Co., Ltd.
The main drafters of this standard. Ding Jinhai, Dongmei, Hu Xiaoyi, Liu Run, Li Yanhong, Lu Jiehua, Ge Weixin, Liaoxuan Ge, Wang Hong, Li Minhua,
Yang Hongjun.
This standard replaces the standards previously issued as follows.
--- JG/T 116-1999.
Polycarbonate (PC) hollow board
1 Scope
This standard specifies the polycarbonate (PC) hollow plate terms and definitions, classification and marking, raw materials, requirements, test methods, test rules
Then, mark, package, transport, store.
This standard applies to general-purpose industrial and civil use of polycarbonate (PC) hollow plate (hereinafter referred to as "hollow plate", identified as PCK).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
Plastics - Determination of 30 ° C ~ 30 ° C linear expansion coefficient Quartz dilatometer method GB/T 1036-2008
Plastics - Determination of tensile properties - Part 1. General
GB/T 1040.2-2006 Plastics - Determination of tensile properties - Part 2. Test conditions for molding and extrusion of plastics
GB/T 1634.2-2004 Determination of plastic deformation temperature load - Part 2. plastic, hard rubber and long fiber reinforced composite
material
Transparent plastics - Determination of light transmittance and haze GB/T 2410-2008
GB/T 2411-2008 Plastics and hard rubbers Determination of indentation hardness (Shore hardness) using a durometer
GB/T 2680-1994 Building Glass Visible light transmittance, direct sunlight transmittance, total solar transmittance, ultraviolet transmission
Than the determination of the parameters of the window glass
GB/T 2828.1-2003 Sampling procedures for sampling inspection - Part 1. batch acceptance inspection by acceptance quality limit (AQL) sampling
plan
GB/T 2918-1998 plastic sample conditioning and testing of the standard environment
Building exterior doors and windows thermal insulation performance classification and testing methods GB/T 8484-2008
Building materials and products combustion rating
Plastics - Determination of bending properties GB/T 9341-2008
Color building materials - Measurement of colorimetric method GB/T 11942-1989
General rules for drop weight impact test methods for hard plastics
Testing methods for airtight, watertight and wind pressure resistant performance of curtain wall of building GB/T 15227-2007
Plastics laboratory exposure test methods - Part 1. General
GB/T 16422.2-1999 plastic laboratory exposure test methods - Part 2. Xenon arc lamp
Architectural glass lighting roofs
ISO 6603-2..2000 Punching properties of plastics, rigid plastics - Part 2. Instrumented impact test
Plastics - Yellow index test method
3 Terms and definitions
GB/T 2410 and HG/T 3862 define the following terms and definitions apply to this document.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of JG/T 116-2012_English be delivered?Answer: Upon your order, we will start to translate JG/T 116-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of JG/T 116-2012_English with my colleagues?Answer: Yes. The purchased PDF of JG/T 116-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version JG/T 116-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JG/T 116-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |