HJ 2545-2016 (HJ2545-2016)

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Related Standard	Status	PDF
HJ 2545-2016	English	169	Add to Cart	3 days [Need to translate]	Technical requirement for environmental labeling products Electronic whiteboard	HJ 2545-2016	Valid	HJ 2545-2016

HJ 2545-2016
(Environmental labeling product technical requirements electronic whiteboard)
National Environmental Protection Standard of the People 's Republic of China
Environmental labeling product technical requirements
Whiteboard
Technical requirement for environmental labeling products
Electronic whiteboard
2016-11-14 release
2017-01-01 Implementation
Ministry of Environmental Protection released
Directory
Preface
1 Scope of application 1
2 normative reference document 1
3 Terms and Definitions
Basic Requirements 1
Technical content 1
6 Test Method 3
Appendix A (normative) prohibits the use of phthalates 4
Preface
To implement the "People's Republic of China Environmental Protection Law" to reduce the whiteboard products in the production and use of the process of environmental and human health
Kang influence, protect the environment, the development of this standard.
This standard puts forward the requirements of environmental design, production process, product, packaging and description of electronic whiteboard.
This standard is the first release, with reference to the German Blue Angel Standard Interactive Whiteboards (RAL-UZ 166) to develop.
This standard is organized by the Ministry of Environmental Protection Science and Technology Standards Division.
The main drafting unit of this standard. Environmental Development Department of Environmental Protection Department.
The environmental protection department of this standard approved on November 14,.2016.
This standard has been implemented since January 1,.2017.
This standard is explained by the Ministry of Environmental Protection.
Environmental labeling product technical requirements electronic whiteboard
1 Scope of application
This standard specifies the terms and definitions, basic requirements, technical contents and test methods for electronic whiteboard environmental labeling products.
This standard applies to the electronic whiteboard, does not include supporting the use of computers, projectors and so on.
2 normative reference documents
The contents of this standard refer to the terms of the following documents, those who do not note the date of the reference document, the effective version of this standard applies.
GB 6675.4 Toy safety - Part 4. Migration of specific elements
GB/T 16288 Marking of plastic products
GB/T 18455 Packaging Recycling Mark
Limits for Restricted Substances in Electrical and Electronic Products GB/T
HJ 571 Environmental labeling products Technical requirements Wood - based panels and their products
HJ 2534 Environmental labeling products Technical requirements Battery
3 terms and definitions
The following terms and definitions apply to this standard.
Electronic whiteboard electronic whiteboard
Through the whiteboard, computer, projector and other components of the interactive control environment, the use of relevant software to achieve on the whiteboard control calculation
Machine and synchronous display, the operation of the whiteboard can also be synchronized on the computer display and can store the human-computer interaction system.
4 basic requirements
4.1 product quality should meet the corresponding product quality standards.
4.2 The pollutant discharge of the product manufacturer shall conform to the pollutant discharge standard stipulated by the state or local.
4.3 production enterprises in the production process should strengthen the clean production.
5 technical content
5.1 Product environment design requirements
5.1.1 Recycling design
5.1.1.1 Plastic parts with mass greater than 25 g shall use monomeric or copolymers.
5.1.1.2 Plastic parts with a mass greater than 25 g The number of monopolymers or copolymers used is no more than 4 and is easy to disassemble.
5.1.1.3 Plastic parts with a surface area greater than 25 g or greater in surface area exceeding.200 mm2 shall be in accordance with the requirements of GB/T 16288
Show.
5.1.2 Hazardous Substances in Components
5.1.2.1 Plastic parts with a mass greater than 25 g do not use short chain chlorinated paraffins (SCCPs), hexabromocyclododecane (HBCDD), medium chai