HJ 2520-2012 (HJ2520-2012)

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Related Standard	Status	PDF
HJ 2520-2012	English	209	Add to Cart	3 days [Need to translate]	Technical requirement for environmental labeling products. Heavy-duty vehicles	HJ 2520-2012	Valid	HJ 2520-2012

HJ 2520-2012
Technical requirement for environmental labeling products.Heavy-duty vehicles
National Environmental Protection Standard of the People's Republic
Environmental Labeling Products Technical Requirements Heavy Vehicles
Published on July 7,.2012
2012-10- 1 Implementation
Ministry of Environmental Protection released
Content
Foreword. II
1 range.1
2 Normative references 1
3 Terms and Definitions..1
4 Basic requirements 2
5 Technical content 2
6 Test method 3
Foreword
To implement the Environmental Protection Law of the People's Republic of China, reduce the environmental impact of heavy-duty vehicles in production, use and scrapping
And the impact of human health, improve environmental quality, and develop this standard.
This standard puts forward corresponding requirements for heavy vehicle pollutant discharge, energy consumption, recycling and reuse, and automobile coating production.
This standard is the first release.
This standard applies to China Environmental Labeling Product Certification.
This standard was formulated by the Science and Technology Standards Department of the Ministry of Environmental Protection.
The main drafting unit of this standard. Jinan Automobile Testing Center
This standard was approved by the Ministry of Environmental Protection on July 3,.2012.
This standard has been implemented since October 1,.2012.
This standard is explained by the Ministry of Environmental Protection.
Environmental Labeling Products Technical Requirements Heavy Vehicles
1 Scope of application
This standard specifies the basic requirements, technical contents and inspection methods for environmentally-friendly products of heavy-duty vehicles.
This standard applies to heavy-duty vehicles.
2 Normative references
The terms in the following documents become the terms of this standard by reference to this standard. For undated references,
The latest version applies to this standard.
GB 1495 Vehicle Accelerated Vehicle Outboard Noise Limit and Measurement Method
GB 14762 Heavy-duty vehicle gasoline engine and vehicle exhaust pollutant emission limits and measurement methods (China III, IV order
segment)
GB/T 15089 Motor vehicle and trailer classification
GB 17691 Vehicle Compression Ignition, Gaseous Fuel Ignition Engine and Vehicle Exhaust Pollutant Emission Limits and Measurement Methods (Medium
Country III, IV, V stage)
GB/T 18697 Acoustic car interior noise measurement method
GB/T 19515 Road vehicle reusability and recyclability calculation method
HJ/T 293 Cleaner Production Standard Automotive Manufacturing (painting)
JT 711 operating bus fuel consumption limit and measurement method
JT 719 Operating Truck Fuel Consumption Limits and Measurement Methods
3 Terms and definitions
The following terms and definitions apply to this standard.
3.1 Heavy-duty vehicles Heavy-duty vehicles
Refers to Class M and Class N vehicles with a maximum total mass of more than 3,500 kg. The definition of Class M and Class N vehicles is in accordance with GB/T 15089.
3.2 M1, M2, M3, N2 and N3 cars
M1, M2, M3, N2 and N3 cars [GB/T 15089 definition]
The M1 class refers to a passenger vehicle that includes no more than nine seats, including the driver's seat.
The M2 class refers to a passenger car with more than nine seats including the driver's seat and a maximum total mass of 5000kg.
Car.
The M3 class refers to a passenger vehicle with more than nine seats including the driver's seat and a maximum total mass of more than 5000kg.
Class N2 refers to a cargo vehicle with a maximum total mass of more than 3,500 kg but not exceeding 12,000 kg.
The N3 class refers to a cargo vehicle with a maximum total mass of more than 12,000 kg.
3.3 Maximum Total Mass (GVM) Gross Vehicle Mass
Refers to the maximum technically permissible quality proposed by the automobile manufacturer.
3.4 Recoverability rate
Percentage (mass percentage) of vehicle mass that can be recycled and/or reused in new vehicles [GB/T 19515
definition].
3.5 Recyclability rate
Percentage of mass (% by mass) of vehicles that can be reused and/or reused