| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| HJ 1116-2020 | English | RFQ |
ASK
|
14 days [Need to translate]
|
Technical specification for application and issuance of pollutant permit - Manufacture of paint, ink, pigments and allied products
| Valid |
HJ 1116-2020
|
Standard similar to HJ 1116-2020 HJ 1107 HJ 1108 HJ 1106 Basic data | Standard ID | HJ 1116-2020 (HJ1116-2020) | | Description (Translated English) | Technical specification for application and issuance of pollutant permit - Manufacture of paint, ink, pigments and allied products | | Sector / Industry | Environmental Protection Industry Standard | | Word Count Estimation | 142,111 | | Date of Issue | 2020-03-04 | | Date of Implementation | 2020-03-04 | | Issuing agency(ies) | Ministry of Ecology and Environment | HJ 1116-2020: Technical specification for application and issuance of pollutant permit - Manufacture of paint, ink, pigments and allied products
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical specification for application and issuance of pollutant permit - Manufacture of paint, ink, pigments and allied products
National Environmental Protection Standards of the People's Republic of China
Technical specifications for pollutant discharge permit application and issuance
Coatings, inks, pigments and similar products manufacturing
2020-03-04 released
2020-03-04 Implementation
Issued by the Ministry of Ecology and Environment
Table of contents
Foreword...II
1 Scope of application...1
2 Normative references...1
3 Terms and definitions...4
4 Key pollution management units...6
4.1 Requirements for the declaration of the basic situation of the pollutant discharge unit...6
4.2 Corresponding discharge outlets in the production and discharge process and the determination method of the permitted discharge limit...34
4.3 Feasible technical requirements for pollution prevention and control...42
4.4 Self-monitoring management requirements...47
4.5 Requirements for preparation of environmental management ledgers and pollution discharge permit execution reports...54
4.6 Accounting method of actual emissions...58
4.7 Compliance Judgment Method...61
5 Simplified management of sewage units...64
5.1 Requirements for the declaration of the basic situation of pollutant discharge units...
5.2 Corresponding discharge outlets in the production and discharge process and the determination method of the permitted discharge limit...86
5.3 Feasible technical requirements for pollution prevention...89
5.4 Self-monitoring management requirements...94
5.5 Requirements for the preparation of environmental management ledger and pollution discharge permit implementation report...102
5.6 Accounting method of actual emissions...104
5.7 Compliance Judgment Method...104
Appendix A (informative appendix) product name and basic information of pollutants...108
Appendix B (Informative Appendix) Environmental Management Ledger Records (Key Management Pollutant Discharge Units)...119
Appendix C (informative appendix) Reference table of environmental management ledger records (simplified management of pollutant discharge units)...125
Appendix D (Informative Appendix) Form of Annual Implementation Report of Pollution Discharge Permit (Key Management Pollutant Discharge Units)...127
Appendix E (informative appendix) Form of annual report on the implementation of pollutant discharge permit (simplified management of pollutant discharge units) 135
Foreword
In order to implement the "Environmental Protection Law of the People's Republic of China", "The Air Pollution Prevention Law of the People's Republic of China", "China
The Water Pollution Prevention and Control Law of the People’s Republic of China, the Soil Pollution Prevention and Control Law of the People’s Republic of China and other laws and regulations, the Office of the State Council
Notice of the Office on Issuing the Implementation Plan for the Control of Pollutant Discharge Permit System (Guobanfa (2016﹞81), "Pollution Permit
Manageable Measures (for Trial Implementation) (Ministry of Environmental Protection Order No. 48) and the List of Classified Management of Discharge Permits for Fixed Pollution Sources,
Improve the technical support system for pollutant discharge permits, and guide and standardize the pollutant discharge of paint, ink, pigment and similar product manufacturing industries
The work of permit application and issuance is to develop this standard.
This standard specifies the basis for the application and issuance of pollutant discharge permits for the manufacturing of paint, ink, pigment and similar products.
In this case, the requirements for filling in, the determination of permitted emission limits, the methods of actual emission accounting and compliance determination, as well as self-monitoring,
Environmental management requirements such as the environmental management account and the implementation report of pollution permits, and put forward coatings, inks, pigments and similar products
Feasible technical requirements for pollution prevention and control in the manufacturing industry.
Appendix A to Appendix E of this standard are informative appendices.
This standard is issued for the first time.
This standard is formulated by the Department of Environmental Impact Assessment and Emission Management and the Department of Regulations and Standards of the Ministry of Ecology and Environment.
The main drafting organizations of this standard. East China University of Science and Technology, Beijing Academy of Environmental Sciences, Environmental Engineering of the Ministry of Ecology and Environment
Process Evaluation Center, China Coatings Industry Association, Ink Branch of China Daily Chemical Industry Association, Shanghai Environmental Monitoring Center.
This standard was approved by the Ministry of Ecology and Environment on March 04, 2020.
This standard will be implemented on March 04, 2020.
This standard is interpreted by the Ministry of Ecology and Environment.
Pollutant discharge permit application and issuance of technical specifications for paints, inks, pigments and similar
Product manufacturing
1 Scope of application
This standard specifies the basis for the application and issuance of pollutant discharge permits for the manufacturing of paint, ink, pigment and similar products.
In this case, the requirements for filling in, the determination of permitted emission limits, the actual emission accounting and compliance determination methods, as well as self-monitoring, environmental
Environmental management requirements such as the environmental management account and the implementation report of pollution permits, and proposed the system of paint, ink, pigment and similar products.
Feasible technical requirements for pollution prevention and control of industrial pollutants.
This standard is applicable to guide the management of pollutant discharge permits for paint, ink, pigment and similar product manufacturing industries in the country
The information platform fills in relevant application information, which is suitable for guiding the issuing authority to review and determine the manufacture of paints, inks, pigments and similar products.
Permit requirements for pollution discharge permits for manufacturing pollutants.
This standard is applicable to the emission of air pollutants and water pollutants by pollutants from the manufacturing industry of paint, ink, pigment and similar products
Management of pollution permits.
The pollution discharge units of paint, ink, pigment and similar product manufacturing in this standard include paint manufacturing, ink and similar products
Manufacturing, industrial pigment manufacturing, arts and crafts pigment manufacturing, dye manufacturing (including organic pigment manufacturing, dye pigment intermediate manufacturing),
The pollutant discharge unit of the manufacturing category of packing and similar products for sealing.
In the paint, ink, pigment and similar products manufacturing industry, the implementation of the "thermal power plant air pollutant emission standards"
(GB 13223) production facilities or discharge outlets, apply the "Technical Specification for Application and Issuance of Pollution Permits for Thermal Power Industry";
For production facilities or discharge outlets that implement the "Boiler Air Pollutant Emission Standard" (GB 13271), the "Pollution Permit" is applicable
Application and issuance of technical specifications for boilers (HJ 953); implementation of "Synthetic Resin Industry Pollutant Emission Standards" (GB 31572)
For production facilities or discharge outlets, the "Pollution Discharge Permit Application and Issuance Technical Specification for Petrochemical Industry" (HJ 853) shall apply;
The production facilities or emissions of zinc oxide and other production facilities that implement the "Emission Standard of Pollutants for the Inorganic Chemical Industry" (GB 31573)
Inorganic Chemical Industry (HJ 1035) is applicable to the "Technical Specification for Pollution Discharge Permit Application and Issuance" (HJ 1035);
The production facilities or discharge outlets of dye and pigment intermediates according to the Industrial Pollutant Discharge Standard (GB 31571) shall be applicable to the
License application and issuance of technical specifications for the petrochemical industry (HJ 853).
Paints, inks, paints, inks, etc. that are not specified in this standard but discharge industrial waste water, waste gas or toxic and hazardous pollutants specified by the state
For other pollution-producing facilities and discharge outlets of the pollutant discharge unit of the paint and similar product manufacturing industry, refer to the "Pollution Discharge Permit Application and Issuing Techniques"
"General Rules of Technical Specifications" (HJ 942) requires implementation.
2 Normative references
This standard quotes the following documents or their clauses. For undated references, the effective version applies to this standard.
GB 8978 Integrated Wastewater Discharge Standard
GB 9078 Emission Standard of Air Pollutants for Industrial Furnaces
GB 13223 Emission Standard of Air Pollutants for Thermal Power Plants
GB 13271 Boiler Air Pollutant Emission Standard
GB 14554 Emission Standard of Odor Pollutants
GB 16297 Comprehensive Emission Standard of Air Pollutants
GB 18597 Pollution Control Standard for Hazardous Waste Storage
GB 18599 General industrial solid waste storage and disposal site pollution control standards
GB 25463 Discharge Standard of Water Pollutants for Ink Industry
GB 31571 Pollutant Emission Standard for Petrochemical Industry
GB 31572 Pollutant Emission Standard for Synthetic Resin Industry
GB 31573 Inorganic Chemical Industry Pollutant Discharge Standard
GB 37822 Unorganized emission control standard of volatile organic compounds
GB 37824 Emission Standard of Air Pollutants for Coating, Ink and Adhesive Industry
GB/T 4754-2017 Classification of National Economic Industries
GB/T 16157 Determination of particulate matter in exhaust from stationary sources and sampling method for gaseous pollutants
GB/T 16758 Classification and technical conditions of exhaust hoods
HJ 75 Technical specification for continuous monitoring of emission of stationary pollution source flue gas (SO2, NOX, particulate matter)
HJ 76 Technical requirements and testing methods for continuous monitoring system for emission of stationary pollution source flue gas (SO2, NOX, particulate matter)
HJ 91.1 Technical Specification for Wastewater Monitoring
Technical requirements and testing methods of HJ 101 ammonia nitrogen water quality online automatic monitor
HJ 353 water pollution source online monitoring system (CODcr, NH3-N, etc.) installation technical specifications
HJ 354 Water Pollution Source Online Monitoring System (CODcr, NH3-N, etc.) Acceptance Technical Specification
HJ 355 water pollution source online monitoring system (CODcr, NH3-N, etc.) operation technical specifications
HJ 356 Technical Specification for Data Validity Judgment of Water Pollution Source Online Monitoring System (CODcr, NH3-N, etc.)
HJ 377 Chemical Oxygen Demand (CODCr) Water Quality Online Automatic Monitor Technical Requirements and Testing Methods
HJ 493 Technical Regulations for Storage and Management of Water Quality Samples
HJ 494 Technical Guide for Water Quality Sampling
HJ 495 Technical Regulations for Water Quality Sampling Scheme Design
HJ 608 Code Rules for Pollutant Discharge Units
HJ 819 General Rules of Technical Guidelines for Self-monitoring of Pollutant Discharge Unit
HJ 820 Technical Guide for Self-monitoring of Sewage Discharge Units Thermal Power and Boilers
HJ 836 Gravimetric method for determination of low-concentration particulate matter in waste gas from stationary sources
HJ 853 Pollutant Discharge Permit Application and Issuance Technical Specification Petrochemical Industry
HJ 905 Technical Specification for Environmental Monitoring of Odor Pollution
HJ/T 91 Technical specification for surface water and sewage monitoring
HJ 942 General Rules of Technical Specifications for Pollution Discharge Permit Application and Issuance
HJ 944 General Rules of Technical Specifications for Environmental Management Ledger and Pollution Discharge Permit Implementation Report of Pollutant Discharge Units (Trial)
HJ 947 Technical Guidelines for Self-monitoring of Pollutant Dischargers Petrochemical Industry
HJ 953 Sewage discharge permit application and issuance of technical specifications for boilers
HJ 1013 Technical requirements and testing methods for continuous monitoring system of non-methane hydrocarbons in waste gas from stationary sources
HJ 1035 Pollutant Discharge Permit Application and Issuance Technical Specification Inorganic Chemical Industry
HJ 1087 Technical Guide for Self-monitoring of Pollutant Discharge Unit
HJ/T 55 Technical Guidelines for Monitoring Unorganized Emissions of Air Pollutants
HJ/T 164 Technical Specification for Groundwater Environmental Monitoring
HJ/T 166 Technical Specification for Soil Environmental Monitoring
HJ/T 373 Fixed pollution source monitoring quality assurance and quality control technical specifications (trial implementation)
HJ/T 397 Fixed source exhaust gas monitoring technical specification
AQ/T 4274 Technical specification for wind speed detection and evaluation of local exhaust facilities control
"List of Classification Management of Discharge Permits for Fixed Pollution Sources"
"Notice of the State Council on the Three-Year Action Plan for Winning the Blue Sky Defense War" (GuoFa﹝2018﹞No.22)
"Administrative Measures for Pollution Discharge Permits (Trial)" (formerly Ministry of Environmental Protection Order No. 48)
"National Hazardous Waste List" (Order No. 39 of the Ministry of Environmental Protection)
"Administrative Measures for the Transfer of Hazardous Wastes" (State Environmental Protection Administration Order No. 5)
"Technical Requirements for Standardized Remediation of Sewage Outlets (for Trial Implementation)" (Huan Jian [1996] No. 470)
"Administrative Measures for the Operation of Pollution Source Automatic Monitoring Facilities" (Huanfa [2008] No. 6)
"Announcement on the Implementation of Special Emission Limits for Air Pollutants" (formerly Ministry of Environmental Protection Announcement No. 14 of.2013)
"Reply to Issues Concerning the Implementation of Special Emission Limits for Air Pollutants" (Huanban Qiqihan [2016] No. 1087)
"Announcement on the Implementation of Special Emission Limits for Air Pollutants in Beijing-Tianjin-Hebei Air Pollution Transmission Channel Cities" (formerly
Ministry of Health Announcement No. 9 of.2018)
"Volatile Organic Compounds (VOCs) Pollution Prevention Technology Policy" (formerly Ministry of Environmental Protection Announcement.2013 No. 31)
"Comprehensive Treatment Plan for Volatile Organic Compounds in Key Industries" (Huantaiqi﹝2019﹞53)
"Announcement on the Special Emission Limits of Water Pollutants in the Taihu Lake Basin Implementing National Emission Standards" (No. 28,.2008 of the Ministry of Environmental Protection)
"Announcement on the Scope of Administrative Areas for the Implementation of National Pollutant Discharge Standards and Water Pollutant Discharge Limits in the Taihu Lake Basin" (Environmental
Ministry of Environmental Protection Announcement No. 30 of.2008)
"Announcement on Issuing the "List of Toxic and Hazardous Air Pollutants (2018)" (Ministry of Ecology and Environment, National Health
Health Committee Announcement No. 4 of.2019)
"Announcement on Issuing the "List of Toxic and Hazardous Water Pollutants (First Batch)" (Ministry of Ecology and Environment Announcement No. 28,.2019)
"Announcement on Issuing the List of Priority Controlled Chemicals (First Batch)" (formerly Ministry of Environmental Protection Announcement No. 83 of.2017)
3 Terms and definitions
The following terms and definitions apply to this standard.
3.1 Manufacturing of paint, ink, pigments and allied products
Refers to the C264 paint, ink, pigment and similar product manufacturing industry specified in GB/T 4754-2017, including C2641
Paint manufacturing, C2642 ink and similar product manufacturing, C2643 industrial pigment manufacturing, C2644 arts and crafts pigment manufacturing,
C2645 dye manufacturing, C2646 sealing filler and similar products manufacturing. See Appendix A for specific product categories and definitions.
3.2 Pollutant emission units or facilities of paint, ink, pigment and similar product manufacturing industry
manufacture of paint,ink, pigments and allied products
Refers to sewage disposal units or production facilities engaged in the manufacturing of paints, inks, pigments and similar products.
3.3 manufacturing of paints and coatings
Refers to the production of covering materials made by adding pigments, solvents and auxiliary materials to natural resins or synthetic resins.
Production activities, including the preparation of paint and its thinner, paint remover and other auxiliary materials.
3.4 manufacturing of ink and allied products
Refers to a dispersion system composed of colorants, binders, auxiliary agents, etc., which are transferred to the substrate during the printing process
Coloring substances, and computer printing, copier ink and other production activities.
3.5 manufacturing of industrial pigments
Refers to the production activities of inorganic pigments and similar materials used in coatings, inks, ceramics, enamel, glass and other industries, mainly
See Appendix A for products and classifications.
3.6 manufacturing of arts and crafts pigments
Refers to the manufacture of artistic pigments such as oil paintings, gouache paintings, and advertisements.
3.7 manufacturing of dyes and organic pigments
Refers to the production activities of organic synthesis, plant or animal pigments, and organic pigments. Including dyes and organic pigments
For the definition of specific product categories, see Appendix A.
3.8 dyes
Refers to colored organic compounds that can be dissolved in water or other media to make a solution or dispersion, and can be directly or through a mordant
It is a substance that can color fibers and have certain fastness and vividness after dyeing.
3.9 organic pigments
Refers to an organic compound that colors a coloring substance in a state of highly dispersed particles. The pigment itself does not dye the fiber
When using, it mainly relies on the action of the polymer binder to stick the tiny particles of the pigment on the surface or inside of the fiber.
3.10 dye and pigment intermediates
Refers to various aromatic derivatives used in the production of dyes and organic pigments. See Appendix A for specific product categories.
3.11 Manufacturing of packing and allied products for sealing
Refers to the production activities used in the manufacture of architectural coatings, sealing and painters, and other similar chemical materials.
3.12 key pollutant emission unit
Refers to the pollutant discharge units that are included in the "List of Classified Management of Permits for Discharge of Fixed Pollution Sources".
3.13 Simplified pollutant emission unit
Refers to the pollutant discharge units that are included in the "List of Classification Management of Permits for Discharge of Fixed Pollution Sources" to simplify management.
3.14 permitted emission limits
Refers to the maximum discharge concentration and discharge volume of pollutants permitted by the pollutant discharge unit as specified in the pollution discharge permit.
3.15 special periods
Refers to the environmental quality compliance plan formulated by the local people’s government in accordance with the law and other relevant environmental management regulations.
The pollutant discharge of pollutants has special requirements, including the period of response to heavy pollution weather and the period of winter protection.
3.16 Volatile organic compounds (VOCs)
Refers to organic compounds that participate in atmospheric photochemical reactions, or organic compounds determined in accordance with relevant regulations.
This standard uses non-methane total hydrocarbons (indicated by NMHC) as pollutant control items; the total volatility is to be released by the state
After the organic matter (indicated by TVOC) analysis method standard, according to the standard requirements, TVOC is added as a control item.
3.17 Non-methane hydrocarbons (NMHC)
Refers to the total amount of gaseous organic compounds other than methane that the hydrogen flame ionization detector responds using the prescribed detection method
And, in terms of the mass concentration of carbon.
3.18 fugitive emission
Refers to the irregular discharge of atmospheric pollutants without passing through the exhaust tube, including the escape of open workplaces, and through gaps,
The discharge of vents, open doors and windows and similar openings (holes), etc.
4 Key management pollutant discharge units
4.1 Requirements for the declaration of the basic situation of pollutants
4.1.1 General principles
The key pollutant discharge units shall, in accordance with the requirements of this standard, fill in the relevant information in the national pollutant discharge permit management information platform declaration system.
Should information. Those that are not included in the reporting system, are required by the local ecological and environmental authority, or are deemed necessary by the pollutant discharge unit
If you report, you can add content by yourself.
Local ecological and environmental authorities at or above the municipal level with districts may increase the
The content specified in the permit, and fill in the “local health authority with the right to issue” in the declaration system of the national pollution discharge permit management information platform
Management content added by the environmental and environmental authorities" column.
Failed to obtain approval opinions for environmental impact assessment of construction projects according to law, or failed to obtain local people’s government in accordance with relevant national regulations
The pollutant discharging units that are required to deal with and rectify the relevant certification materials issued by the regulations in accordance with the law, the pollution prevention facilities or measures adopted
Pollutant emission units that meet the requirements of the permitted emission concentration, as well as other pollutant emission units that require corrections in accordance with regulations, shall apply for
When filling in the application information for pollutant discharge permits, “correction regulations” should be made in the national pollutant discharge permit management information platform application system
In one column, fill in the content to be corrected, correction measures and time limit requirements, etc.
The basic information of the pollutant discharging unit should be filled in according to the actual situation, and the authenticity, legality and completeness of the submitted application materials
Take legal responsibility.
4.1.2 Basic information of pollutant discharge units
The basic information of the pollutant discharge unit should be filled in with the name of the unit, whether it needs to be rectified, the category of pollution discharge permit management, postal code,
Type of business, whether to start production and the date of production, the latitude and longitude of the center of the production and business site, whether the location is an environmentally sensitive area (such as
Key atmospheric control areas, total phosphorus and total nitrogen control areas, etc.), whether it is located in an industrial park and its name, environmental impact
Approval document number (record number), local government’s identification of illegal projects or document number, major pollution
Document number of total particulate matter distribution plan, total particulate matter indicator (t/a), total sulfur dioxide indicator (t/a), total nitrogen oxide
Quantity index (t/a), total volatile organic compound index (t/a), total chemical oxygen demand index (t/a), total ammonia nitrogen index
(T/a), the total amount of other pollutants involved, etc. If there is no allocation index for the total amount of major pollutants, do not fill in.
When filling in the “Pollutant Discharge Permit Management Category” on the basic information form of the pollutant discharging unit, the
"Can be classified management list" to fill in.
When filling in the “industry category” on the national pollution discharge permit management information platform, ...
|