HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

HJ 1006-2018 English PDF

US$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
HJ 1006-2018: Stationary source emission - Determination of volatile halogenated hydrocarbons - Bags sampling-gas chromatography
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
HJ 1006-2018English329 Add to Cart 3 days [Need to translate] Stationary source emission - Determination of volatile halogenated hydrocarbons - Bags sampling-gas chromatography Valid HJ 1006-2018

PDF similar to HJ 1006-2018


Standard similar to HJ 1006-2018

HJ 1013   HJ 836   HJ 734   HJ 1131   HJ 1007   

Basic data

Standard ID HJ 1006-2018 (HJ1006-2018)
Description (Translated English) Stationary source emission - Determination of volatile halogenated hydrocarbons - Bags sampling-gas chromatography
Sector / Industry Environmental Protection Industry Standard
Classification of Chinese Standard Z25
Word Count Estimation 14,150
Date of Issue 2018-12-26
Date of Implementation 2019-06-01
Regulation (derived from) Ministry of Ecology and Environment Announcement No. 71 of 2018
Issuing agency(ies) Ministry of Ecology and Environment

HJ 1006-2018: Stationary source emission - Determination of volatile halogenated hydrocarbons - Bags sampling-gas chromatography


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Stationary source emission - Determination of volatile halogenated hydrocarbons - Bags sampling-gas chromatography National Environmental Protection Standard of the People's Republic Fixed source of waste gas volatile halogenated hydrocarbon Determination of air bag sampling - gas chromatography Stationary source emission-Determination of volatile halogenated hydrocarbons-Bags sampling-gas chromatography Published on.2018-12-26 2019-06-01 Implementation Ministry of Ecology and Environment released i directory Foreword...ii 1 Scope...1 2 Normative references...1 3 Principles of the method...1 4 Reagents and materials...1 5 Instruments and Equipment...2 6 samples...3 7 Analysis steps...3 8 Calculation and representation of results...4 9 Precision and Accuracy...5 10 Quality Assurance and Quality Control...5 11 Waste treatment...5 12 Notes...5 Appendix A (Normative) The detection limit and lower limit of the target... 6 The precision and accuracy of the Appendix B (informative appendix) method...6

Foreword

To protect the "Environmental Protection Law of the People's Republic of China" and the "Air Pollution Control Law of the People's Republic of China" This standard is formulated to ensure the health of human body and to regulate the determination of volatile halogenated hydrocarbons in fixed source waste gas. This standard specifies gas chromatography for the determination of volatile halogenated hydrocarbons in fixed source exhaust gases. Appendix A of this standard is a normative appendix, and Appendix B is an informative appendix. This standard is the first release. This standard is formulated by the Department of Eco-Environmental Monitoring, the Department of Regulations and Standards of the Ministry of Ecology and Environment. This standard was drafted. Dalian Environmental Monitoring Center. This standard is verified by. Shenyang Environmental Monitoring Center Station, Qingdao Environmental Monitoring Center Station, and Anshan City Environmental Monitoring Xinzhan, Tianjin Ecological Environment Monitoring Center, Fushun Environmental Monitoring Center Station and Xiamen Environmental Monitoring Center Station. This standard is approved by the Ministry of Ecology and Environment on December 26,.2018. This standard has been implemented since June 1,.2019. This standard is explained by the Ministry of Ecology and Environment.

1 Determination of volatile halogenated hydrocarbons from fixed pollution sources

Air bag sampling - gas chromatography

1 Scope of application

This standard specifies gas chromatography for the determination of volatile halogenated hydrocarbons in fixed source exhaust gases. This standard is applicable to methyl chloride, vinyl chloride, methyl bromide, ethyl bromide, chloropropene, dichloromethane in fixed pollution source exhaust gas. Chloroprene, chloroform, carbon tetrachloride, 1,2-dichloroethane, trichloroethylene, 1,2-dichloropropane, epichlorohydrin, Determination of 14 volatile halogenated hydrocarbons such as tetrachloroethylene. When the injection volume is 1.0 ml, the detection limit of the method is 0.0003 mg/m3 to 0.6 mg/m3, and the lower limit of determination is 0.0012 mg/m3 to 2.4 mg/m3, see Appendix A for details.

2 Normative references

This standard refers to the following documents or their terms. For undated references, the valid version applies to this standard. GB/T 16157 Determination of particulate matter in fixed pollution source exhaust gas and sampling method of gaseous pollutants HJ 732 Sampling air bag method for fixed volatile waste gas HJ/T 48 soot sampler technical conditions HJ/T 397 Fixed Source Exhaust Gas Monitoring Technical Specification

3 Principle of the method

The volatile halogenated hydrocarbons in the fixed pollution source are collected in air bags, directly injected, separated by gas chromatography, and electron trapped. Detected by an detector (ECD), characterized by retention time, and quantified by external standard method.

4 reagents and materials

4.1 Volatile halogenated hydrocarbon standard gas. Purchase commercially available certified standard gas. See Table 1 for reference concentrations. Table 1 Reference concentration of each component in the mixed gas Serial number compound name Standard gas volume fraction (μmol/mol) 1 carbon tetrachloride, tetrachloroethylene 0.0100 2 chloroform, trichloroethylene 0.100 3 chloroprene 1.00 4 dichloromethane, 1,2-dichloroethane, 1,2-dichloropropane, methyl bromide, ethyl bromide, chloropropene 10.0

2 continued

Serial number compound name Standard gas volume fraction (μmol/mol) 5 methyl chloride, vinyl chloride, epichlorohydrin 50.0 4.2 Nitrogen. purity ≥ 99.999%.

5 instruments and equipment

5.1 Gas Chromatograph. with split/splitless inlet, electron capture detector (ECD). 5.2 Quartz capillary column. 30 m × 0.25 mm × 1.40 μm, stationary phase 6% cyanopropyl phenyl and 94% dimethyl polysilicon Oxytomane. Other equivalent capillary columns can also be used. 5.3 Air bag. Polyvinyl fluoride (PVF) material or other equivalent material air bag. 5.4 Air bag sampling system. see Figure 1. 1-exhaust pipe; 2-glass wool filter; 3-Teflon connecting pipe; 4-heated sampling pipe; 5-fast joint male head; 6-fast joint female head; 7-air bag; 8-vacuum box; 9-valve; 10--activated carbon filter; 11-exhaust pump. Figure 1 Air bag sampling system 5.5 Sampling tube. hard glass or polyethylene. The inner diameter should be greater than 6 mm and should be attached to a temperature above 120 °C. Insulation jacket. 5.6 Smoke sampler. It has the module to measure the moisture content of the flue gas and the temperature of the flue gas. The performance of the instrument complies with the requirements of HJ/T 48. 5.7 Gas dilution unit. Accuracy is better or better than 2%. 5.8 Oven. The temperature can reach 130 ° C with an accuracy of ± 1 ° C. 5.9 Hermetic syringe. 1.0 ml. 5.10 Common instruments and equipment used in general laboratories. 36 samples 6.1 Sample collection 6.1.1 Fixed pollution source exhaust sampling position and sampling point, sampling frequency, sampling time and sampling operation Relevant provisions of GB/T 16157, HJ/T 397 and HJ 732. 6.1.2 Connect the air bag sampling device (5.4) as shown in Figure 1. Start the air pump and turn off the air pump after the bag is full. Remove the sampling bag seal. If the temperature of the exhaust gas in the exhaust pipe is higher than the ambient temperature during sampling, turn on the sampling tube (5.5) for heating. For the power supply, heat the sampling tube (5.5) to 120 °C ± 5 °C. 6.1.3 Determine the moisture content in the exhaust pipe by the smoke sampler (5.6). The operation steps are related to GB/T 16157. Provisions. Note. This method can only collect samples with temperatures below 150 °C. 6.2 Transport blank sample Take a sample and collect an air bag of the same batch, fill it in the laboratory with nitrogen, and bring it to the sampling site without sample collection. Shipped back to the laboratory along with the sample as a blank sample for transport. 6.3 Sample preservation Samples were stored in the dark after collection and analyzed within 24 h after sampling. 6.4 Laboratory blank samples Take a sample of the same batch of an air bag, fill the laboratory with nitrogen, save the laboratory in the dark, as a laboratory empty White sample.

7 Analysis steps

7.1 Instrument Reference Conditions Inlet temperature. 150 ° C; detector temperature. 280 ° C; column flow. 1.5 ml/min; split ratio. 5.1; Flow rate. 60 ml/min; temperature program. 38 ° C for 1.8 min, ramp up to 120 ° C at 10 ° C/min, then 15 ° C /min The rate is raised to 240 ° C for 2 min. Injection volume. 1.0 ml. 7.2 Calibration 7.2.1 Establishment of the standard curve The volatile halogenated hydrocarbon standard gas (4.1) is diluted 100 times, 50 times, 20 by gas dilution device (5.7) Times, 10 times and 5 times, formulated into a series of standard use gas (currently used), according to the instrument reference conditions for injection analysis. Take The volume fraction of the target is the abscissa, and the corresponding peak area or peak height is plotted on the ordinate to establish a standard curve. 47.2.2 Standard chromatogram The standard sample reference chromatogram of 14 volatile halogenated hydrocarbons under the reference conditions of this standard is shown in Figure 2. 1-chloromethane; 2-chloroethylene; 3-bromomethane; 4-bromoethane; 5-chloropropene; 6-dichloromethane; 7-chlorobutadiene; 8-trichloromethane; 9-carbon tetrachloride; 10-1,2-dichloroethane; 11-trichloroethylene; 12-1,2-dichloropropane; 13-epichlorohydrin; 14-tetrachloroethylene. Figure 2 Standard sample reference chromatogram of 14 volatile halogenated hydrocarbons 7.3 Sample determination The inner wall of the sample air bag must be observed before sample analysis. If there is droplet condensation, the air bag should be placed in the oven. After heating at 50 ° C for 1 min or more, it was confirmed that the droplet condensation phenomenon was eliminated, and the air bag sampling analysis was quickly taken out. Pipette 1.0 ml of the sample with a gas tight syringe (5.9) and inject it into the gas chromatograph (5.1) or through 1.0 ml. Quantitative loop or autosampler injection, measured according to the same conditions as the establishment of the standard curve, record the retention time of the chromatographic peak, Peak area or peak height. 7.4 Blank test Transport blank samples (6.2) and laboratory blank samples (6.4) were determined according to the same procedure as for sample determination (7.3).

8 Calculation and representation of results

8.1 Qualitative analysis Qualitative according to the retention time of the target compound. 8.2 Calculation of results The mass concentration ρ of the volatile halogenated hydrocarbon (based on the dry gas volume in the standard state) is calculated according to formula (1). 4.22) 1 ( × − ×× Xsw DM φ (1) Where. ρ--the mass concentration of volatile halogenated hydrocarbons in the sample, mg/m3; M--the molar mass of a target compound, g/mol; D--sample dilution factor; 5φ--the volume fraction of a target compound obtained from a standard curve, μmol/mol; Xsw--volume percentage of moisture content in exhaust gas, %; 22.4--The molar volume of gaseous molecules in the standard state, L/mol. 8.3 Result representation The retention of the number of digits after the decimal point of the measurement result is consistent with the method detection limit, and at most three significant digits are reserved.

9 Precision and accuracy

9.1 precision Six laboratories performed six repeated measurements on low, medium and high blank spiked samples, respectively. The standard deviations were 4.4% to 13%, 2.4% to 12%, and 1.8% to 8.4%, respectively; the relative standard deviations between laboratories were 1.9% to 7.3%, 2.1% to 7.7%, and 1.8% to 5.6%; the repeatability limits are. 0.0001 mg/m3 to 0.4 mg/m3, 0.0005 mg/m3 to 1.5 mg/m3 and 0.0017 mg/m3 to 5.0 mg/m3; the reproducibility limits are. 0.0001 mg/m3~ 0.4 mg/m3, 0.0006 mg/m3 to 1.5 mg/m3 and 0.0022 mg/m3 to 5.1 mg/m3. Refer to Appendix B for details of the method precision summary data. 9.2 Accuracy Six laboratories performed six repeated measurements on low, medium and high blank spiked samples, and added standard recovery. The average values are 77.4% to 83.9%, 80.7% to 93.5%, and 92.4% to 100%, respectively. The method accuracy summary data is detailed in Appendix B. 10 Quality Assurance and Quality Control 10.1 At least one transport blank sample and one laboratory blank sample shall be prepared for each batch of samples, and the measured value shall be lower than the method detection. limit. 10.2 The correlation coefficient of the standard curve is r ≥ 0.99; for each batch (≤ 20 samples), a curve intermediate check point shall be determined. The relative error of the concentration corresponding to the standard curve and the standard curve should be within ±20%. 11 Waste treatment The waste generated by the experiment shall be collected and stored in a separate manner, safely disposed of as required or entrusted to a qualified unit for disposal. 12 Precautions 12.1 When the sampling air bag is used repeatedly, a blank test should be carried out after cleaning. If the measurement result is lower than the method detection limit, The air bag can continue to be used, otherwise it must be discarded. 12.2 The position of the inlet of the sampling pipe should be as close as possible to the center of the discharge pipe, and the length of the sampling pipe should be as short as possible.

6 Appendix A

(normative appendix) Target detection limit and lower limit of measurement The method detection limits and lower limit of determination for 14 targets are shown in Table A.1. Table A.1 Detection limits and lower limit of determination of target No. Compound name English name CAS No. The detection limit (mg/m3) Lower limit of measurement (mg/m3) 1 methyl chloride Methyl chloride 74-87-3 0.4 1.6 2 Vinyl chloride 75-01-4 0.3 1.2 3 methyl bromide Methyl bromide 74-83-9 0.2 0.8 4 Bromoethane 74-96-4 0.2 0.8 5 Chloropropene Allyl chloride 107-05-1 0.09 0.36 6 Dichloromethane Dichloromethane 75-09-2 0.3 1.2 7 chloroprene 2-Chloro-1,3-butadiene 126-99-8 0.02 0.08 8 chloroform Chloroform 67-66-3 0.003 0.012 9 Carbon tetrachloride Carbon tetrachloride 56-23-5 0.0003 0.0012 10 1,2-Dichloroethane 1,2-Dichloroethane 107-06-2 0.2 0.8 11 Trichloroethylene Trichloroethylene 79-01-6 0.005 0.02 12 1,2-dichloropropane 1,2-Dichloropropane 78-87-5 0.4 1.6 13 Epichlorohydrin Epichlorohydrin 106-89-8 0.6 2.4 14 Tetrachloroethylene 127-18-4 0.0004 0.0016

7 Appendix B

(informative appendix) Method precision and accuracy The precision summary data of the method is shown in Table B.1, and the accuracy summary data is shown in Table B.2. Table B.1 Precision summary data Compound blank spiked sample concentration determination average Value (mg/m3) Laboratory room Relative standard deviation(%) Laboratory room Relative standard deviation(%) Repeatability limit r (mg/m3) Reproducibility limit Name (μmol/mol) (mg/m3) (mg/m3) Methyl chloride 0.625 1.41 1.15 5.3~8.4 4.4 0.2 0.3 2.5 5.64 4.55 2.4~6.4 2.1 0.6 0.6 10 22.5 20.8 1.9~5.0 2.6 2 2.4 Vinyl chloride 0.625 1.74 1.37 6.0~8.8 4.4 0.3 0.3 2.5 6.98 5.75 3.8~6.4 2.7 0.9 0.9 10 27.9 25.9 1.8~6.9 2.3 2.5 2.9 Methyl bromide 0.125 0.53 0.41 4.7~9.8 2.2 0.1 0.1 0.5 2.12 1.86 6.5~9.1 7 0.4 0.5 2 8.48 8.18 3.5~5.0 3 1 1.1 Bromoethane 0.125 0.61 0.48 5.6~8.2 2.2 0.1 0.1 0.5 2.43 2.26 2.7~9.1 5.3 0.4 0.5 2 9.73 9.39 2.5~7.9 3.3 1.4 1.6 Chloropropene 0.125 0.427 0.341 6.1~9.4 4.4 0.07 0.08 0.5 1.71 1.54 5.6~10 3.5 0.32 0.33 2 6.83 6.46 3.0~7.8 1.8 1 0.98 Dichloromethane 0.125 0.47 0.37 5.1~8.8 2.6 0.1 0.1 0.5 1.9 1.69 6.4~9.4 2.9 0.4 0.4 2 7.58 7.39 3.3~5.9 4 0.9 1.2 Chloroprene 0.0125 0.049 0.039 5.1~11 2.4 0.01 0.01 0.05 0.198 0.176 6.4~9.4 3 0.04 0.04 0.2 0.791 0.735 3.3~4.9 2.1 0.09 0.09 Trichloromethane 0.00125 0.0067 0.0056 4.4~9.3 6.1 0.001 0.001 0.005 0.0266 0.0239 5.1~9.7 5 0.005 0.006 0.02 0.107 0.102 2.5~6.2 3.9 0.013 0.016 Carbon tetrachloride 0.000125 0.00086 0.0007 4.9~8.2 1.9 0.0001 0.0001 0.0005 0.00343 0.00319 4.0~6.9 4.9 0.0005 0.0006 0.002 0.0137 0.0134 3.4~5.6 3.9 0.0017 0.0022 1,2-dichloroethane 0.125 0.55 0.44 4.6~10 3.3 0.1 0.1 0.5 2.21 1.95 6.9~12 3 0.5 0.5 2 8.84 8.48 4.0~8.4 2.9 1.5 1.5

8 continued

Compound blank spiked sample concentration determination average Value (mg/m3) Laboratory room Relative standard deviation(%) Laboratory room Relative standard deviation(%) Repeatability limit r (mg/m3) Reproducibility limit Name (μmol/mol) (mg/m3) (mg/m3) Trichloroethylene 0.00125 0.0073 0.006 5.3~9.3 7.3 0.001 0.002 0.005 0.0293 0.0274 3.7~8.5 5.1 0.006 0.006 0.02 0.117 0.113 3.1~7.7 5.2 0.015 0.021 1,2-dichloropropane 0.125 0.63 0.5 5.2~8.6 3.6 0.1 0.1 0.5 2.52 2.3 6.1~8.3 3.8 0.4 0.5 2 10.1 9.84 3.5~8.3 4.4 1.5 1.8 Epichlorohydrin 0.625 2.58 2.01 5.4~9.3 3.4 0.4 0.4 2.5 10.3 8.8 5.1~7.6 2.4 1.5 1.5 10 41.3 39.4 3.5~5.4 2.1 5 5.1 Tetrachloroethylene 0.000125 0.00093 0.00078 6.5~13 3 0.0002 0.0002 0.0005 0.0037 0.00329 6.6~8.1 7.7 0.0007 0.0009 0.002 0.0148 0.0148 2.3~6.8 5.6 0.0018 0.0028 Table B.2 Accuracy summary data Compound name Blank spiked sample concentration Mean value (mg/m3) (%) (%) _2 SP ± (%) (μmol/mol) (mg/m3) Methyl chloride 0.625 1.41 1.15 81.6 3.7 81.6±7.4 2.50 5.64 4.55 80.7 1.7 80.7±3.4 10.0 22.5 20.8 92.4 2.5 92.4±5.0 Vinyl chloride 0.625 1.74 1.37 78.7 3.4 78.7±6.8 2.50 6.98 5.75 82.4 2.2 82.4±4.4 10.0 27.9 25.9 92.8 2.2 92.8±4.4 Methyl bromide 0.125 0.53 0.41 77.4 1.7 77.4±3.4 0.500 2.12 1.86 87.7 6.1 87.7±12.2 2.00 8.48 8.18 96.5 2.9 96.5±5.8 Bromoethane 0.125 0.61 0.48 78.7 1.6 78.7±3.2 0.500 2.43 2.26 93.0 5.0 93.0±10.0 2.00 9.73 9.39 96.5 3.1 96.5±6.2 Chloropropene 0.125 0.427 0.341 79.9 3.6 79.9±7.2 0.500 1.71 1.54 90.1 3.2 90.1±6.4 2.00 6.83 6.46 94.6 1.7 94.6±3.4 Dichloromethane 0.125 0.47 0.37 78.7 3.4 78.7±6.8 0.500 1.90 1.69 88.9 2.6 88.9±5.2 2.00 7.58 7.39 97.5 3.8 97.5±7.6 Chloroprene 0.0125 0.049 0.039 79.6 2.0 79.6±4.0 0.0500 0.198 0.176 88.9 2.7 88.9±5.4

9 continued

Compound name Blank spiked sample concentration Mean value (mg/m3) (%) (%) _2 SP ± (%) (μmol/mol) (mg/m3) Chloroprene 0.200 0.791 0.735 92.9 2.0 92.9±4.0 Trichloromethane 0.00125 0.0067 0.0056 83.4 5.2 83.4±10.4 0.00500 0.0266 0.0239 89.8 4.4 89.8±8.8 0.0200 0.107 0.102 95.3 3.7 95.3±7.4 Carbon tetrachloride 0.000125 0.00086 0.00070 81.4 1.5 81.4±3.0 0.000500 0.00343 0.00319 93.0 4.4 93.0±8.8 0.00200 0.0137 0.0134 97.8 3.8 97.8±7.6 1,2-dichloroethane 0.125 0.55 0.44 80.0 2.6 80.0±5.2 0.500 2.21 1.95 88.2 2.6 88.2±5.2 2.00 8.84 8.48 95.9 2.7 95.9±5.4 Trichloroethylene 0.00125 0.0073 0.0060 82.2 5.8 82.2±11.6 0.00500 0.0293 0.0274 93.5 4.7 93.5±9.4 0.0200 0.117 0.113 96.6 5.1 96.6±10.2 1,2-dichloropropane 0.125 0.63 0.50 79.4 2.9 79.4±5.8 0.500 2.52 2.30 91.3 3.5 91.3±7.0 2.00 10.1 9.84 97.4 4.2 97.4±8.4 Epichlorohydrin 0.625 2.58 2.01 77.9 2.6 77.9±5.2 2.50 10.3 8.80 85.4 2.0 85.4±4.0 10.0 41.3 39.4 95.4 2.0 95.4±4.0 Tetrachloroethylene 0.000125 0.00093 0.00078 83.9 2.6 83.9±5.2 0.000500 0.00370 0.00329 88.9 7.0 88.9±14.0 0.00200 0.0148 0.0148 100 5.6 100±11.2

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of HJ 1006-2018_English be delivered?

Answer: Upon your order, we will start to translate HJ 1006-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of HJ 1006-2018_English with my colleagues?

Answer: Yes. The purchased PDF of HJ 1006-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.