|
US$689.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 9747-2008: Test methods for aircraft tyres
Status: Valid GB/T 9747: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 9747-2008 | English | 689 |
Add to Cart
|
5 days [Need to translate]
|
Test methods for aircraft tyres
| Valid |
GB/T 9747-2008
|
| GB/T 9747-2004 | English | 399 |
Add to Cart
|
3 days [Need to translate]
|
Dynamometer test methods for aircraft tyres
| Obsolete |
GB/T 9747-2004
|
| GB/T 9747-1988 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Dynamometer test methods for aircraft tyres
| Obsolete |
GB/T 9747-1988
|
PDF similar to GB/T 9747-2008
Standard similar to GB/T 9747-2008 GB 9744 GB 9743 GB/T 9764 Basic data | Standard ID | GB/T 9747-2008 (GB/T9747-2008) | | Description (Translated English) | Test methods for aircraft tyres | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G41 | | Classification of International Standard | 83.160.20 | | Word Count Estimation | 30,381 | | Date of Issue | 2008-06-18 | | Date of Implementation | 2009-02-01 | | Older Standard (superseded by this standard) | GB/T 9747-2004; GB/T 11191 ~ 11192-2004; GB/T 11193-1998; GB/T 11194-2004; GB/T 11195-1998; GB/T 11196-2004; GB/T 13653 ~ 13656-2004; GB/T 17042-1997; GB/T 17043-1997 | | Adopted Standard | ISO 3324-2-1998, NEQ | | Regulation (derived from) | National Standard Approval Announcement 2008 No.10 (Total No.123) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies test methods for dynamic simulation of aviation tires, burst pressure test methods, static load performance test methods, outer rim size measurement methods, tubeless tires airtight performance test methods, has tubeless tire bead fit test methods, section analytical measurement methods, X -ray detection methods, holographic detection methods, disparity test method static equilibrium, physical performance test method, bead temperature test methods, ambient temperature test methods. This standard applies to low, high speed aircraft tire. | GB/T 9747-2008: Test methods for aircraft tyres---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test methods for aircraft tyres
ICS 83.160.20
G41
National Standards of People's Republic of China
Replacing GB/T 9747-2004, GB/T 11191-2004, GB/T 11192-2004, GB/T 11193-1998, GB/T 11194-2004,
GB/T 11195-1998, GB/T 11196-2004, GB/T 13653-2004, GB/T 13654-2004, GB/T 13655-2004,
GB/T 13656-2004, GB/T 17042-1997, GB/T 17043-1997
Test methods for aircraft tires
(ISO 3324-2.1998, Aircrafttyresandrims-
Part 2. Testmethodsfortyres, NEQ)
Posted 2008-06-18
2009-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 Dynamic simulation test 1
5 burst pressure test 7
6 8 Static load performance test method
7 peripheral dimensions measuring methods 9
8 tubeless tires airtight performance test method 11
9 tubeless tire bead fit pressure test methods --- carbon 11 method
10 Section 13 analysis of measuring methods
11 X-ray detection method 16
12 holographic detection method 19
13 static unbalance Test Method 20
14 Physical Performance Test Method 21
15 bead high temperature test methods 24
16 Standard Test Method for Resistance ambient temperature 25
Foreword
This standard replaces GB/T 9747-2004 "Aircraft Tyres dynamic simulation test", GB/T 11191-2004 "Air tire burst
Pressure test method ", GB/T 11192-2004" Air tire static load performance test method ", GB/T 11193-1998" Air tire
Margin size measurement method ", GB/T 11194-2004" Air tubeless tires airtight performance test method ", GB/T 11195-1998" Air
Tubeless tire bead fit pressure test method ", GB/T 11196-2004" Air tire section analysis of measuring methods "
GB/T 13653-2004 "Air tire X-ray detection method", GB/T 13654-2004 "Air tire holographic detection method"
GB/T 13655-2004 "Air tire static unbalance test method", GB/T 13656-2004 "Aircraft Tyres physical performance test side
Method ", GB/T 17042-1997" Air tire bead high temperature test methods ", GB/T 17043-1997" aviation tires ambient temperature test
method".
This standard and ISO 3324-2.1998 "Part 2 tire testing method aviation tires and rims" (in English) of the degree of consistency
Not equivalent.
This standard is to integrate these standards revision, the original terms of the standard adjustments made editorial changes.
The standard X-ray detection method with the previous version, GB/T 13653-2004 main differences are as follows.
--- Deleting data Appendix A (2004 edition Appendix A).
This standard holographic detection methods with the previous version, GB/T 13654-2004 main differences are as follows.
--- Omitted typical fringe schematic (2004 layout 1 to 5).
The physical properties of this standard test methods, test methods bead temperature, ambient temperature test method with the previous version GB/T 13656-
2004, GB/T 17042-1997, GB/T 17043-1997 main differences are as follows.
--- Standard all references to "elongation" as used herein, are changed to "elongation at break" standard all references to "Tearing permanent deformation"
Terms were changed to "pull off permanently deformed."
The standard proposed by China Petroleum and Chemical Industry Association.
This standard by the National Standardization Technical Committee aviation tires.
This standard was drafted. Rubber Group Shuguang Rubber Industry Research and Design Institute.
The main drafters. Zhang Ping, Sheng Baoxin.
This standard replaces the standards previously issued as follows.
--- GB 9747-1988, GB/T 9747-2004;
--- GB/T 11191-1989, GB/T 11191-2004;
--- GB/T 11192-1989, GB/T 11192-2004;
--- GB/T 11193-1989, GB/T 11193-1998;
--- GB/T 11194-1989, GB/T 11194-2004;
--- GB/T 11195-1989, GB/T 11195-1998;
--- GB/T 11196-1989, GB/T 11196-2004;
--- GB/T 13653-1992, GB/T 13653-2004;
--- GB/T 13654-1992, GB/T 13654-2004;
--- GB/T 13655-1992, GB/T 13655-2004;
--- GB/T 13656-1992, GB/T 13656-2004;
--- GB/T 17042-1997;
--- GB/T 17043-1997.
Test methods for aircraft tires
1 Scope
This standard specifies the test methods for dynamic simulation of aircraft tires, burst pressure test methods, static load performance test method, outer dimensions
Methods of measurement, tubeless tires airtight performance test method for tubeless tire bead fit pressure test method, the cross section analysis of measuring methods, X shoot
Line detection methods, holographic detection methods, static unbalance test methods, physical performance test method, the bead temperature test methods, environment
Temperature test methods.
This standard applies to low-speed, high-speed aircraft tires.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For cited documents with dates, followed by its
Some amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Study whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 528 vulcanized rubber or thermoplastic rubber tensile stress strain properties (GB/T 528-1998, eqv ISO 37.
1994)
Hardness test GB/T 531 rubber hardness pressed into the pocket (GB/T 531-1999, idt ISO 7619. 1986)
GB/T 532 vulcanized rubber or thermoplastic rubber and fabric adhesive strength was measured (GB/T 532-1997, idt ISO 36.1993)
GB/T 1682 Determination of vulcanized rubber low temperature brittleness Single Specimen
GB/T 1689 Determination of abrasion resistance of vulcanized rubber (in Akron machine)
GB/T 2941 rubber physical test method for preparing and conditioning General Procedure (GB/T 2941-2006, ISO 23529.2004,
IDT)
GB/T 3512 vulcanized rubber or thermoplastic rubber hot air and heat accelerated aging test (GB/T 3512-2001, eqv ISO 188.
1998)
GB/T 6326 tires terms and definitions (GB/T 6326-2005, ISO 4223-1.2002, Definitionsofsometerms
usedintyreindustry-Part 1. Pneumatictyres, NEQ)
GB/T 8170 numerical rounding rules
GB 9101 dipped nylon tire cord fabric 66
GB 9102 Nylon 6 dipped tire cord fabric
GB/T 9746 series aircraft tire
GB/T 13652 Air quality tire surface
General requirements for HG/T 2198 vulcanized rubber physical test method
3 Terms and Definitions
Terms and definitions GB/T 6326 established apply to this standard.
4 Dynamic simulation test
4.1 Sample
After the test tire shall be cured according to GB/T 13652 surface quality inspection, at ambient temperature for parking for more than 24h before intake
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 9747-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 9747-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 9747-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 9747-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 9747-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9747-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|