|
US$199.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 9634.8-2018: Ferrite cores -- Guideline on the limits of surface irregularities -- Part 8: PQ-cores
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 9634.8-2018 | English | 199 |
Add to Cart
|
3 days [Need to translate]
|
Ferrite cores -- Guideline on the limits of surface irregularities -- Part 8: PQ-cores
| Valid |
GB/T 9634.8-2018
|
PDF similar to GB/T 9634.8-2018
Basic data | Standard ID | GB/T 9634.8-2018 (GB/T9634.8-2018) | | Description (Translated English) | Ferrite cores -- Guideline on the limits of surface irregularities -- Part 8: PQ-cores | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L19 | | Classification of International Standard | 29.100.10 | | Word Count Estimation | 10,166 | | Date of Issue | 2018-03-15 | | Date of Implementation | 2018-10-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 9634.8-2018: Ferrite cores -- Guideline on the limits of surface irregularities -- Part 8: PQ-cores
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Ferrite cores--Guideline on the limits of surface irregularities--Part 8. PQ-cores
ICS 29.100.10
L19
National Standards of People's Republic of China
The limit guide for surface defects of ferrite cores
Part 8. PQ Cores
Part 8. PQ-cores
Published by.2018-03-15
2018-10-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Administration released
Directory
Preface I
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Surface Defect Limit 1
4.1 Dropping Blocks and Irregular Edges 1
4.2 Crack 3
4.3 Die 5
4.4 Crystalline 5
4.5 Flash 5
4.6 air hole 6
Reference 7
Figure 1 Surface Defect Example 1
Figure 2 Blocking and Irregular Edges Diagram 2
Fig. 3 Crack schematic 4
Figure 4 PQ core size 4
Figure 5 sticking schematic diagram 5
Figure 6 Figure 5
Figure 7 Sketch of flash 6
Figure 8 Schematic diagram 6
Table 1 Limits of Permissible Block Size 2
Table 2 Visual reference area and length 3
Table 3 Crack Limit 4
Foreword
GB/T 9634, "Finite Core Surface Defect Limit Guide" consists of the following components and is increasing.
--- Part 1. General;
---Part 2. RM cores;
--- Part 3. ETD and E cores;
--- Part 4. Annular magnetic core;
--- Part 8. PQ cores;
This part is Part 8 of GB/T 9634.
This section was drafted in accordance with the rules given in GB/T 1.1-2009.
Please note that some of the contents of this document may involve patents. The issuing agency of this document does not assume responsibility for identifying these patents.
This section was proposed by the Ministry of Industry and Information Technology of the People's Republic of China.
This part is under the jurisdiction of the National Standardization Technical Committee for Magnetic Components and Ferrite Materials (SAC/TC89).
This section was drafted. Tiantong Holdings Co., Ltd., China Electronics Standardization Institute, Nanjing Jing Yan Magnetic Technology Co., Ltd.
Division, Hengdian Group Dongci Co., Ltd., Nanjing Xinkangda Magnetic Industry Co., Ltd., Cooper Electronic Technology (Shanghai) Co., Ltd., Shandong Zhongzhong
Rui Electronics Co., Ltd., Zhejiang Institute of Metrology.
The main drafters of this section. Zhang Ruibiao, Cui Ying, Sun Jiangping, Shao Feng, Tang Jie, Meng Guofeng, Tan Weizhong, Li Yinchuan, Dong Shengyu, Song Yanyan,
Liu Jiuxi, Yan Chong, Zhao Guang, Yan Yipeng, Lu Mingyue, and Zhi Zhishu.
The limit guide for surface defects of ferrite cores
Part 8. PQ Cores
1 Scope
This part of GB/T 9634 specifies guidelines for the surface imperfection limit of PQ cores that comply with the relevant general specification.
This section applies to PQ magnetic cores made of magnetic oxides.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 9634.1 Guide for Limiting Surface Defects in Ferrite Cores Part 1. General
GB/T 28864.1 Soft Ferrite Core Definition of Terms Part 1. Physical Defects Terminology
GB/T 28864.2 Soft Ferrite Core Definition of Terms Part 2. Dimensions
3 Terms and definitions
The following terms and definitions, as defined in GB/T 9634.1 and GB/T 28864.1, apply to this document.
3.1
Stomatal pores
Holes left on the surface of the core after sintering and surface treatment (see Figure 1).
Example. An example of the remaining surface defects of the PQ core is also shown in Figure 1.
Figure 1 Surface defect example
4 surface defect limit
4.1 Blocking and Irregular Edges
4.1.1 Locating Blocks and Irregular Edges on the Matching Plane
The permissible limits for the area of the mating surface (C1 and C1' in Figure 2).
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 9634.8-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 9634.8-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 9634.8-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 9634.8-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|