HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 9414.9-2017 English PDF

US$644.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 9414.9-2017: Maintainability -- Part 9: Maintenance and maintenance support
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 9414.9-2017English644 Add to Cart 3 days [Need to translate] Maintainability -- Part 9: Maintenance and maintenance support Valid GB/T 9414.9-2017

PDF similar to GB/T 9414.9-2017


Standard similar to GB/T 9414.9-2017

GB/T 9254.1   GB/T 6113.104   GB/T 34986   GB/T 9414.5   GB/T 9414.2   GB/T 9414.3   

Basic data

Standard ID GB/T 9414.9-2017 (GB/T9414.9-2017)
Description (Translated English) Maintainability -- Part 9: Maintenance and maintenance support
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard L05
Classification of International Standard 03.100.40; 03.120.01
Word Count Estimation 34,332
Date of Issue 2017-12-29
Date of Implementation 2018-07-01
Regulation (derived from) National Standards Bulletin 2017 No. 32
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 9414.9-2017: Maintainability -- Part 9: Maintenance and maintenance support

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Maintainability - Part 9. Maintenance and maintenance support ICS 03.100.40; 03.120.01 L05 National Standards of People's Republic of China Maintainability Part 9. Repair and maintenance support Maintainability- Part 9.Maintenanceandmaintenancesupport (IEC 60300-3-14.2004, Dependability management- Part 3-14.Applicationguide-Maintenanceandmaintenancesupport, IDT) 2017-12-29 Posted 2018-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released Directory Foreword Ⅲ Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions, Abbreviations 2 3.1 Terms and definitions 2 3.2 Abbreviations 4 4 Repair and maintenance support outlined 4 4.1 life cycle 4 4.2 repair instructions 7 4.3 Maintenance Support 9 5 Management responsibility 9 5.1 Management responsibilities 9 5.2 Customers 9 5.3 Maintenance Strategy 9 5.4 Maintenance and Repair Support Plan 10 5.5 Responsibility, Authorization and Communication 10 6 maintenance implementation process 10 6.1 Overview 10 6.2 Maintenance Management 11 6.3 Maintenance and Repair Support Plan 11 6.4 Maintenance Preparation 14 6.5 Maintenance Execution 14 7 Resource Management 14 7.1 Resources available 14 7.2 Human Resources 15 7.3 Infrastructure 15 7.4 Information Resources 18 7.5 Materials and spare parts 21 Measurement, Analysis and Improvement 8.1 Overview 22 8.2 Monitoring and Measurement 23 8.3 Maintenance Evaluation 24 8.4 Maintenance Improvement 24 8.5 Change 24 Appendix A (informative) factors that affect the maintenance and repair support 25 A.1 Overview 25 A.2 Use of Complex Systems 25 A.3 Influencing Factors in the Design Phase 25 A.4 Factors Affecting the Use and Maintenance Phase 26 References 28

Foreword

GB/T 9414 "maintainability" is divided into the following sections. --- Part 1. Application Guide; --- Part 2. Design and development phase of maintenance requirements and research; --- Part 3. Verification and data collection, analysis and presentation; --- Part 5. Diagnostic tests; --- Part 9. Repair and maintenance support. This section GB/T 9414 Part 9. This section drafted in accordance with GB/T 1.1-2009 given rules. This section uses the translation method identical with IEC 60300-3-14.2004 "Credibility Management Part 3-14 Application Guidelines Maintenance and Maintenance and security. " The documents of our country that are consistent with the corresponding international documents that are normative references in this section are as follows. --- GB/T 7829-2012 Fault Tree Analysis (FTA) procedures (IEC 61025.2006, IDT) This section made the following editorial changes. --- Modify the standard name. This part is proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This part of the National Electrical and Electronic Products Reliability and Maintenance of Standardization Technical Committee (SAC/TC24) centralized. This section is drafted unit. Fifth Institute of Industry and Information Technology, Wuhu 赛 Bao Information Industry Technology Research Institute Co., Ltd., Shanghai Institute of Industrial Automation Instrumentation, China Electronics Technology Group Corporation twenty-eighth Institute, China Electronics Technology Group Corporation twenty-ninth study Institute of Electronic Engineering, China Academy of Engineering Physics, University of Electronic Science and Technology. The main drafters of this section. Hu Po, Wang Yong, the clock, Zou Qifeng, Wu Dong, Li Jiajia, Zhou Xiaoming, Li Yan, Hu Bin, Chen Guangyu.

Introduction

Providing repair and maintenance support is a key element of the product (unit, equipment and system) life cycle to ensure its credibility. To be real Now suitable product features, inherent ability and credibility, the need to provide the necessary maintenance and repair support, and reasonable design, qualified production And the correct operation to use. The amount and type of repair and maintenance support depends on the needs of the customer, the characteristics of the product, the conditions of use, the availability of the provisions and other factors Prime As these factors change, especially in the service and maintenance phases, maintenance and repair support needs to be adjusted. Many different functions, such as repair management and asset management, involve maintenance and repair support. This part of GB/T 9414 and these duties The use of energy is not contradictory, and will be elaborated in the corresponding chapter. Under-repair, over-repair and fault repair can cause product failure and can significantly reduce product availability, resulting in loss of performance and Possible secondary damage can also greatly increase the cost. A reduction in usability often causes obstacles to use and results in reduced benefits and losses May be far more than repair costs, or even more than the initial failure caused by the loss. Security is also affected, and in some industries this is the most Important considerations. This section provides a more general approach to maintenance and repair support than Integrated Support (ILS). ILS makes all safeguards A way to develop essential content for your product. This section gives examples to illustrate the complex system during the design, use and maintenance phase of the specific In the case of repair and maintenance support to be adjusted. Maintainability Part 9. Repair and maintenance support

1 Scope

GB/T 9414 This section describes the maintenance and repair support framework and a variety of minimum common items should be carried out. This section The purpose is to provide a general overview of the management, processes and technologies associated with maintenance and service support, with sufficient credibility Customer demand is very necessary. In some cases, regulatory requirements and other mandatory requirements need to be considered. Therefore, the requirements and responsibilities for repairs and maintenance support are needed Citing this part of the contract clearly stated. This section can be used for suppliers, maintenance organizations and users, and can be applied to all products. This section applies to products include various types of units, equipment and systems (hardware and related software). Most such products require Determine the level of maintenance to ensure that they meet the requirements of the function, credibility, inherent ability, economy, safety and regulatory requirements. Note 1. Maintenance and repair support is a key element of reliability as detailed in IEC 60300-1 and IEC 60300-2. Note 2. For consistency, the term "product" as used in this section is defined in 3.1.5 unless the context otherwise requires.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. IEC 60300-1 Credibility Management Part 1. Dependability management-Part 1.De- pendabilitymanagementsystems) IEC 60300-2, Credibility management - Part 2. Dependability management - Part 2. Guidelines fordependabilitymanagement IEC 60300-3-2 Credibility Management Part 3. Application Guidelines Section 2. Dependability Data Collection (Dependability management-Part 3.Applicationguide-Section2.Colectionofdependabilitydatafromthefield) IEC 60300-3-3 Credibility Management Part 3. Application Guidelines Section 3. Dependabilityman- agement-Part 3.Applicationguide-Section3.Lifecyclecosting) IEC 60300-3-10 Maintainability Part 1. Application Guidelines (Dependabilitymanagement-Part 3-10.Applica- tionguide-Maintainability) IEC 60300-3-11 Credibility Management Part 3. Application Guidelines Section 11. Reliability-Centric Maintenance (Depend- abilitymanagement-Part 3-11.Applicationguide-Reliabilitycentredmaintenance) IEC 60300-3-12 Credibility Management Part 3. Application Guidelines Section 12. Dependabilitymanage- ment-Part 3-12.Applicationguide-Integratedlogisticsupport) IEC 60706-3 Maintenance Part 3. Verification and data collection, analysis and presentation (Guideonmaintainabilityofe- quipment-Part 3.SectionsSectionsSixandSeven-Verificationandcolection, analysisandpresen- tationofdata) IEC 60706-5 Maintenance Part 5. Diagnostic tests (Guideonmaintainabilityofequipment-Part 5.Di- agnostictesting) IEC 60812 system reliability analysis of technical failure modes and impact analysis [Analysistechniquesforsystemreliabil- ity-Procedureforfailuremodeandeffectsanalysis (FMEA)]

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 9414.9-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 9414.9-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 9414.9-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 9414.9-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.